Ruijie S8600E Series Betriebsanleitung

S8600E Series Switch

Routine Maintenance and Troubleshooting

Contents

■Preface

■Routine Maintenance Suggestions

■Handling of Common Faults

■Troubleshooting

■Obtaining Help

Preface

Revision History

Audience

Ruijie business partners and customers who are responsible for configuring

and maintaining Ruijie wireless devices.

Note :

For more detail configuration , see configuration guide for each product . you can download

configuration guide at http://www.ruijienetworks.com

For more technical enquiry , you can visit Ruijie Service portal at http://case.ruijienetworks.com

. You need to sign up before submit a case.

Contents

■Preface

■Routine Maintenance Suggestions

■Handling of Common Faults

■Troubleshooting

■Obtaining Help

Routine Maintenance Suggestions

Importance of routine maintenance:

□Routine maintenance is preventative, during which defects or potential issues

of the device can be timely detected and solved in the process of normal

operating and the device health level can be maintained, so that the device

can securely, stably, and reliably operate in a long term.

Major contents of routine maintenance:

■Hardware running status maintenance

■Smart and automatic health check and periodical maintenance using the Ruijie

Networks health check tool (recommended)

■Manual check of software running status

■Periodical maintenance using the network management system (NMS)

■Checking whether the version upgrade is needed every half year or every year

Routine Maintenance Suggestions–Hardware Running Status

Maintenance

■Check the environment.

□Cleanness:

▪The equipment chassis and floor should be clean and free of any dust. Clean or replace the cabinet

air filters in time; otherwise, ventilation and heat dissipation of the cabinet door and fan tray will be

affected.

□Heat dissipation:

▪When the device runs normally, fans should run properly. If any fan is faulty, the device temperature

will increase and may damage the device. Do not place sundries at the air inlet or outlet of the

device. In addition, periodically clean the dust away from the fans to prevent too much dust from

accumulating on the fans.

▪Run the Ruijie#show tempr command to check whether the operating temperature of the device is

normal.

▪It is recommended a routine inspection be performed on a monthly basis.

Routine Maintenance Suggestions–Hardware Running Status

Maintenance

■Device hardware status:

□Status indicators:

When the device is running, you can check the indicators on boards to monitor the running status

of each board.

If the Alarm indicator on the supervisor module is on in red, a fault occurs in the system. In

this case, log in to the system and check the logs or hardware status information to locate

and rectify the fault.

If the Alarm indicator on the supervisor module is on in yellow, the system temperature

exceeds the alarm threshold and affects the running performance of the system, but the

system can still run. In this case, log in to the system and check the related fault information

to locate and rectify the fault.

If the Status indicator of the fan tray is off, the fan tray is not powered or is faulty. In this

case, log in to the system and check the fan status.

If the Status indicator on a board is off, flashes, or is on in red, the board is faulty. In this

case, identify the fault cause and, if necessary, perform a power-off check.

It is recommended a routine inspection be performed on a monthly basis.

Routine Maintenance Suggestions–Hardware Running Status

Maintenance

■Device hardware status:

□Fans:

▪Fans do not generate abnormal sound. Little dust is attached on the fans. You can run

the show fan command to display the operating status of fans.

□Power supply:

▪The power supply is normal, and the indicator is on in green. You can run the show

power command to display the operating status of the power supply.

It is recommended a routine inspection be performed on a monthly basis.

Routine Maintenance Suggestions–Manual Check of Software

Running Status

Recommended check items:

Health status items:

■CPU usage: Check whether the CPU usages of the line card and engine are

normal.

■CPU protection (CPP) count: Check the number of received or dropped CPU

packets to judge whether the network environment is normal.

■Memory usage: Check whether the memory usage is normal.

■Interface status: Check whether any interface encounters a CRC error.

■Logs: Check whether any abnormal log information exists.

Device configurations (optional)

Run the show ip route command to check whether the route size is the same or

close to the normal size.

Run the show arp counter command to check whether the number of users is the

same or close to the usual size.

Run the show run command to check whether any configuration changes.

It is recommended a routine inspection be performed on a monthly basis.

Routine Maintenance Suggestions–Manual Check of Software

Running Status

■CPU usage:

□Use the show cpu command to check the CPU running status.

▪Ruijie#show cpu New feature: The CPU usage of each line card can be

displayed in RGOS 11.X.

=======================================

CPU utilization in five seconds: 12.41%

CPU utilization in one minute: 13.11%

CPU utilization in five minutes: 13.08%

The CPU usage may increase sharply in a short time if a batch configuration is

performed or a show command is executed. This is a normal symptom.

▪show processes cpu history New feature: Statistics can be taken on the

history CPU usages.

▪In the healthy state, "CPU utilization in five minutes" should be lower than

30%. The CPU usage increases with the load of bearer services, which is a

normal symptom. However, if the CPU usage exceeds 60%, call 4008-111-

000 for consultation or check the technical support documents on the official

website of Ruijie Networks.

It is recommended a routine inspection be performed on a monthly basis.

Andere Handbücher für S8600E Series

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-S5750-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7808C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES Series Bedienungsanleitung

Ruijie

Ruijie RG-CS83 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2900G-E Series Bedienungsanleitung

Ruijie

Ruijie RG-CS88-08 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5760C-X Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6980-64QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6120 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6910-3C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie 5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5750-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2900 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBS7003 Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS3100-48GT4SFP-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie S5750 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung