Ruijie RG-S7808C Series Installations- und Betriebsanleitung

RG-S7808C Series Switches

Hardware Installation and Reference Guide V1.03

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

7KLVGRFXPHQWLVSURYLGHG³DVLV´7KHFRQWHQWVRIWKLVGRFXPHQWDUe subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

zRuijie Networks Website: http://www.ruijienetworks.com/

zService Email: [email protected]

zTechnical Support: http://www.ruijienetworks.com/service.aspx

zTechnical Support Hotline: +86-4008-111-000

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or

loss of data.

1 Product Overview

Launched by Ruijie independently, RG-S7808C series next generation core switches adopt the crossbar architecture and

support dual supervisor modules and power supply redundancy.

zThe RG-S7808C: designed with 8 transverse slots, supporting dual supervisor modules and providing 6 service

module slots;

1.1 RG-S7808C

Specifications

Model

RG-S7808C

Module Slot

two supervisor module slots, six service module slots

Supervisor Module

M7800C-CM

Supervisor Module

Redundancy

Supported

Service Module

M7800C-16SFP8XS-EA

M7800C-24SFP/12GT4XS-EA

M7800C-36GT12SFP4XS-EA

M7800C-48GT4XS-EA

M7800C-48GT4XS-P-EA

M7800C-48SFP4XS-EA

Hot Swapping

Supported

Power Supply

Module

RG-PA600I-F: 90-180V~ power: 600W;

180-264V~ power: 600W

RG-PA1600I-F: 90-180V~ power: 1200W;

180-264V~ power: 1600W

RG-PA3000I-PL: 90-175V~ power: 1200W;

176-209V~ power: 2500W;

210-264V~ power: 3000W

RG-PA1600I-PL: 90-175V~ power: 1000W;

176-264V~ power: 1600W

RG-PA800IF: 90-176V~ power: 400W; 176-264V~ power: 800W

Power Supply

Redundancy

The power supply redundancy of the same model is supported

Fan Module

M08-FAN

EMC Standards

GB9254-2008 CLASS A, FCC CLASS A

Safety Standards

GB4943-2011

Altitude

Long term operation height: 3000m at 50ȭ. The temperature decreases by 1ȭas the altitude

ranging from 3000m to 4000m increases by 200m.

Operation height: 4000m max

Storage height: 4000m max

Operating

Temperature

0°C to 50°C

Storage

Temperature

-40°C to 70°C

Operating Humidity

10% to 90% RH (non-condensing)

MTBF

312,000 hours

Noise

55.9 dB at 35ȭ

73.4 dB at 50ȭ

Weight

Net weight: 32.35 kg (including the chassis and fans)

Dimensions

(W x D x H)

442 mm x 595 mm x 439 mm (cable management brackets excluded), 10U

The weight only includes that of the empty chassis and fans. The whole device's weight is subject to that of the

modules selected.

RG-S7808C switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

Product Appearance

The hardware system of the RG-S7808C switch is composed of the chassis, the power system, modules and the cooling

system.

zThe power system provides four power supply slots and supports N+M power supply redundancy. Users are

recommended to configure redundancy for the power supplies.

zThe RG-S7808C switch provides two supervisor module slots and six service module slots. The supervisor modules

support 1+1 redundancy. Users are recommended to configure redundancy for the supervisor modules. Users may

choose different service modules as needed.

zThe cooling system is composed of the fan trays and air filters. Fan trays are at the back of the chassis. The air filters

are on the right side of the chassis.

Figure 1-1 Appearance of the RG-S7808C Switch

Front Panel

The front panel of the RG-S7808C switch is shown in Figure 1-2.

Figure 1-2 Front Panel of the RG-S7808C Switch

Note:

cSupervisor module slots

dService module slots

eCable management bracket

fSlot for system power supply module

gAnti-static wrist strap socket

Ensure the supervisor module, service module, switch fabric module and power supply module are removed from

the chassis before you move or transport the RG-S7808C chassis.

Back Panel

The back panel of the RG-S7808C switch is shown in Figure 1-3.

Figure 1-3 Back Panel of the RG-S7808C Switch

Note:

cPoE power supply slot

dDirection sign for installing air filter

eCaptive screw of the air filter

fAir filter module

gFan Tray

hHandle of the fan tray

iCaptive screws of the fan tray

For S7808C, the PoE power supply slot consists of a frame of PoE power supply module-- M78-PSE . For more

information, please refer to M78-PSE. If PoE power supply input is in demand, you need to purchase a frame so as

to install a PoE power supply module.

Power supply

The RG-S7808C switch adopts both AC and PoE power supply input.

zAC power supply input: The RG-PA1600I-F and the RG-PA600I-F power supply modules are supported. The two

types of power supply modules support power management. The supervisor module of the RG-S7808C switch can

read the power supply information and implement flexible and intelligent power management.

zPoE power supply input: The RG-PA3000I-PL and the RG-PA1600I-PL power supply modules are supported. The

two types of power supply modules support power management. The supervisor module of the RG-S7808C switch

can read the power supply information and implement flexible and intelligent power management.

The RG-S7808C switch supports N+N power supply redundancy to improve the system stability and reliability. We

recommend users to configure N+M redundancy for power supply modules.

Heat Dissipation System

The operating environment temperature of the RG-S7808C switch ranges between 0 and 50°C . The thermal design must

satisfy the requirement on the device's reliability in the temperature range while ensuring the device's safety and

maintainability. According to the thermal design of the RG-S7808C switch, fans are used to draw air for forced convection

cooling in order to ensure that the device works properly in the specified environment.

Figure 1-4 Ventilation and Heat Dissipation System of the RG-S7808C Switch (Air Intakes)

Note:

cAir intakes for PoE power modules

dAir intakes for service and supervisor modules

eAir intakes for system power modules

Figure 1-5 Ventilation and Heat Dissipation System of the RG-S7808C Switch (Exhaust Vents)

Note:

cExhaust vents for PoE power modules

dExhaust vents for service and supervisor modules

eExhaust vents for system power modules

For the PoE power supply modules, air flows across the chassis from the back intakes to the front vents.

For the supervisor and service modules, air flows across the chassis from the right intakes to the back vents.

For the power supply modules, air flows in from the front intakes and out from the back vents.

The chassis should be mounted in a place with sufficient space for air circulation. Sufficient space (10 cm at least)

must be reserved at the air intakes and exhaust vents for ventilation.

If any module slot is unoccupied, install a filler panel to ensure proper airflow.

1.2 Module

The RG-S7808C switch adopts the module-based design. Compliant with industry standards, the design divides modules

and integrates module interfaces to ensure the switch system's functioning and independence of various function

modules.

The modules of the RG-S7808C switch provide 10/100/1000M auto-sensing Ethernet copper ports, 1000 Mbps/100 Mbps

SFP (single-mode/multi-mode) optical fiber interfaces and 10G/40G optical fiber interfaces.

1.2.1 M7800C-CM

M7800C-CM is the supervisor module of the RG-S7808C series switches and is designed with management and

switching functions.

Module Appearance

Figure 1-6 Appearance of the M7800C-CM Module

External Port

The M7800C-CM module provides three external ports:

zUniversal Serial Bus (USB) port: By connecting to the USB port, the USB storage devices can store logs, host

version, alarms and other diagnosis information, facilitating online upgrade of switch software and storage of logs.

To secure data and prevent damage to the device, it is recommended to use high-quality flash disks produced by

reliable manufacturers. The USB port is compatible with most USB controllers but may be unable to identify some

USB disk models.

zConsole port: As a serial communications port, it uses the RS-232 interface level and standard RJ-45 connector.

This port is used to connect the device to serial ports of background terminal computers to perform tasks including

system commissioning, configuration, maintenance, management, and host software loading.

z10/100/1000M MGMT port: As the 10/100/1000BASE-T Ethernet port, it uses the RJ-45 connector. This port can be

used to connect the device to the Ethernet port of the background computer to load programs. Use the standard

cable to connect the device to the Ethernet port of the background computer.

Button

The M7800C-CM module provides a Reset button, which is used to reset the system. If the button is held for less than five

seconds, it is a short press; if the button is held for five seconds or longer, it is a long press.

In case of a short press, the Status LED flashes in green, and the device resets within five seconds after the press. In

case of a long press, the Status LED flashes in green and then flashes in red; the device resets within five seconds

after the press.

Press the button, and the system starts to collect information, during which the device will not restart. After the

collection is complete, the device restarts automatically. Hold the button for a while and release it, the device restarts

automatically in five seconds.

LED

Identification

on the panel

Status

Meaning

System LED

Status

Off

The module is NOT receiving power.

Solid red

The module is faulty.

Blinking green

Initialization is in progress. Continuous blinking indicates

errors.

Solid green

The module is operational.

Primary/standby supervisor

module LED

Primary

Off

The module acts as the standby supervisor module.

Solid green

The module acts as the primary supervisor module.

Fault alarm LED

Alarm

Off

No fault

Solid red

The system fails, interrupting functioning of the whole

system or a module; the device may be damaged if it

continues operating.

Solid yellow

The device overheats, which will affect the system

performance. The system may continue operating.

Fan status LED

FAN

Solid green

The fan is operational.

Solid yellow

The fan is NOT in the position.

Solid red

The fan is faulty.

Power status LED

PWR

Off

The power supply module is NOT in the position.

Solid green

The power supply module is operational.

Solid red

The power supply module is faulty.

MGMT port status LED

MGMT

Off

The MGMT port is NOT connected.

Green

The MGMT port is connected at 1000Mbps.

Yellow

The MGMT port is connected at 10/100Mbps.

Blinking

The MGMT port is transmitting or receiving data.

Specifications

Model

M7800C-16SFP8XS-EA

CPU

Quad-core CPU, each core with the clock speed of 1.0G

BOOTROM

8 MB

Flash Memory

512 MB

SDRAM

DDRIII 1 GB

External Port

16 SFP ports,

8 SFP+ ports

Transmission

Medium

100BASE-FX(1310nm) Multi-mode or single-mode optical fiber, supported by SFP ports

while not supported by SFP+ ports.

100BASE-FX (1550nm) Single-mode optical fiber, supported by SFP ports while not

supported by SFP+ ports.

1000BASE-SX (850nm) Multi-mode optical fiber

1000BASE-LX (1310nm) Single-mode optical fiber

1000BASE-LH (1310nm) Single-mode optical fiber

1000BASE-ZX (1550nm) Single-mode optical fiber

10GBASE-SR (850nm) Multi-mode optical fiber

10GBASE-LR (1310nm) Single-mode optical fiber

10GBASE-ER (1550nm) Single-mode optical fiber

10GBASE-ZR (1550nm) Single-mode optical fiber

XG-SFP-AOC1M 1m SFP+ active optical cable

XG-SFP-AOC3M 3m SFP+ active optical cable

XG-SFP-AOC5M 5m SFP+ active optical cable

LED

Status, Link/ACT

Hot Swapping

Supported

Power Consumption

ͻ95W

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Operating

Temperature

0 to 50°C

Storage

Temperature

-40 to 70°C

Operating Humidity

10% to 90% RH (non-condensing)

MTBF

305,000 hours

Weight

Net weight: 2.8 kg

Dimensions

(W x D x H)

412 mm x 390 mm x 40.16 mm

The M7800C-CM adopts the CR2032 lithium battery. The device may explode if a wrong battery model is used.

Used batteries should be properly disposed of.

1.2.2 M7800C-16SFP8XS-EA

Module Appearance

Figure 1-7 Appearance of the M7800C-16SFP8XS-EA Module

External Port

M7800C-16SFP8XS-EA module provides 16 SFP ports and 8 SFP+ ports. The SFP ports support hot swap and access

rates of 100/1000M. The SFP+ ports support hot swap, 10 SFP+ modules and Gigabit SFP modules.

The M7800C-16SFP8XS-EA supports 10G SFP+ and Gigabit SFP modules. 10G SFP+ modules cannot be used as

Gigabit SFP modules.

LED

Identification

on the panel

Status

Meaning

System LED

Status

Off

The module is NOT receiving power.

Solid red

The module is faulty.

Blinking green

Initialization is in progress. Continuous blinking indicates

errors.

Solid green

The module is operational

SFP port LED

Link/ACT

Off

The port link is NOT connected.

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie Reyee RG-NBS6002 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES126S-P V2 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-ES106D-P V2 Bedienungsanleitung

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES109DS Bedienungsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83-24GT4XS-PD Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS5200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-P Bedienungsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Handbuch

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5300-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS88-08 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600G-I Series Bedienungsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800 Series Handbuch

Ruijie

Ruijie Reyee RG-ES Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung