Ruijie XS-S1960-10GT2SFP-P-H Installations- und Betriebsanleitung

Ruijie XS-S1960-10GT2SFP-P-H Switches

Hardware Installation and Reference Guide V1.04

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that

supported by the product, with configuration examples.

Command Reference

Describes the related configuration commands, including

command modes, parameter descriptions, usage guides, and

related examples.

Symbol Conventions

The symbols used in this document are described as below:

This symbol brings your attention to some helpful suggestions and references.

This symbol means that you must be extremely careful not to do some things that may damage the device or cause

data loss.

Declaration of Conformity

Note: Operation of this equipment in a residential environment could cause radio interference.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Hardware Installation and Reference Guide Product Overview

1Product Overview

The XS-S1960-10GT2SFP-P-H switch is a next-generation intelligent switch that features high performance, high

security, multiple services and ease of use to meet the needs of the current networks. The XS-S1960-10GT2SFP-P-H

switch can provide the complete end-to-end Quality of Service (QoS), flexible and abundant security policies and

policy-based network management for various networks. It is greatly ideal for such applications as campus network,

enterprise network, government network, service network, residential broadband access and business building network,

providing high-speed, high-efficiency, secure and intelligent access solutions.

Table 1-1 XS-S1960-10GT2SFP-P-H

Model

10/100/1000 Base-T

Auto-sensing Ethernet Port

SFP+

Port

1000Base-X

SFP Port

Console

Port

USB

Port

Pluggable

Power

Slot

XS-S1960-10GT2SFP-P-H

10 (Ports 1-8 are PoE capable)

The SFP ports only support 1000base-X modules.

1000Base-T is compatible with 100Base-TX and 10Base-T in the downlink direction.

The PoE ports support IEEE 802.af/at PoE.

1.1 XS-S1960-10GT2SFP-P-H

Technical Specifications

Model

XS-S1960-10GT2SFP-P-H

CPU

Built-in CPU, single-core processor, 400MHz

Flash Memory

256M

SDRAM

DDRIII 512MB

Optical Module

Supports 1000base-X only. For details, see Appendix B.

The supported module type may change at any time. Consult us for the latest information.

SFP Port

Supports 1000Base-X SFP modules.

Power Supply

AC input

Rated voltage range: 100V to 240V

Maximum voltage range: 90V to 264V

Frequency: 50/60 Hz

Rated current: 2A

HVDC input

Voltage range: 192V to 290V

Current range: 1.0A to 0.4A

Earth Leakage

Current

≤1.5mA

Hardware Installation and Reference Guide Product Overview

EEE

Supported

PoE

Ports 1-8 are PoE-capable with the maximum power output of 30W.

The maximum output power of PoE/PoE+ is 125W.

PoE ports support IEEE 802.af/at PoE.

The available number of PDs is determined by PSE output power and PD input power in

practice.

Power

Consumption

Less than 20W with no PoE load

Less than 165W with PoE full load

Operating

Temperature

0℃to 45℃

Storage

Temperature

-40℃to 70℃

Operating Humidity

10% to 90%

Storage Humidity

5% to 95%

Fan

Fanless design

Temperature

Warning

Supported

EMCStandards

GB9254-2008

EN 300 386

EN 61000-3-2

EN 61000-3-3

EN 61000-4-2

EN 61000-4-3

EN 61000-4-4

EN 61000-4-5

EN 61000-4-6

EN 61000-4-11

EN 55022

EN 55024

EN 61000-4-8

Security Standards

GB4943-2011

EN60950-1

IEC60950-1

Dimensions

(W x D x H)

340 mm x 260 mm x 44 mm

Weight

≤2.5 kg (with package)

The XS-S1960-10GT2SFP-P-H switch is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

Product Appearance

On the front panel, the XS-S1960-10GT2SFP-P-H Ethernet switch provides 10 10/100/1000Base-T Ethernet ports, 2 SFP

ports, and 1 Console port. On the back panel, it provides AC power ports.

Hardware Installation and Reference Guide Product Overview

Figure 1-1 Appearance of XS-S1960-10GT2SFP-P-H

Front Panel

Figure 1-2 Front Panel of XS-S1960-10GT2SFP-P-H

Note:

1. System status LED

2. PoE status LED

3. 10/100/1000Base-T auto-sensing Ethernet

port

4. Copper port status LED

5. Copper port status LED

6. Fiber port status LED

7. PoE Mode Switch-Over Button

8. Console port

9. 10/100/1000Base-T auto-sensing Ethernet port

10. 1000Base-X SFP port

11. Reset Button

Long press PoE Mode Switch-Over Button for above 2 seconds to switch the display mode between PoE mode and

port rate mode.

Hardware Installation and Reference Guide Product Overview

Back Panel

Figure 1-3 Back Panel of XS-S1960-10GT2SFP-P-H

Note:

1. Grounding pole

2. Ventilation openings

Power Supply

The XS-S1960-10GT2SFP-P-H switch adopts AC or HVDC power input.

AC input

Rated voltage range: 100V to 240V

Maximum voltage range: 90V to 264V

Frequency range: 50/60 Hz

Rated current: 2A

Power cord specification: 10A

HVDC input

Voltage range: 192V to 290V

Current range: 0.4A to 1.0A

Heat Dissipation

The XS-S1960-10GT2SFP-P-H adopts fanless design, thereby ensuring normal function of the device in the specified

environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to allow air

circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents. Figure 1-4

shows the flow scheme of heat dissipation.

Figure 1-4 Flow Scheme of Heat Dissipation

Hardware Installation and Reference Guide Product Overview

LEDs

LED

Panel Identification

State

Meaning

Off

The switch is not receiving power.

Blinking green

The system is being initialized.

Continuous blinking indicates errors.

Solid green

The switch is operational.

Solid yellow

Temperature warning

Check the working environment of the switch

immediately.

System status LED

Status

Solid red

The switch is faulty.

Solid green

Indicates the switching state.

PoE status LED

PoE

Solid yellow

Indicates the PoE state.

Off

The port is not connected.

Solid green

The port is connected at 1000 Mbps.

1000Mbps RJ-45 port

status LED

1-10

Blinking green

The port is receiving or transmitting traffic at 1000

Mbps.

Hardware Installation and Reference Guide Product Overview

Solid yellow

The port is connected at 10/100 Mbps.

Blinking yellow

The port is receiving or transmitting traffic at

10/100 Mbps.

Off

PoE is not enabled.

Solid green

PoE is enabled. The port is operational.

RJ45 port PoE status

LED

1-8

Solid yellow

The PoE port is abnormally operational.

Off

The port is not connected.

Solid green

The port is connected at 1000 Mbps.

1000Mbps SFP port

status LED

11F-12F

Blinking green

The port is receiving or transmitting traffic at 1000

Mbps.

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS6002 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6150-X Series Anleitung zur Verwendung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83-PD Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-ES106D-P V2 Bedienungsanleitung

Ruijie

Ruijie RG-NBS1805C-P Bedienungsanleitung

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RGOS 11.X Bedienungsanleitung

Ruijie

Ruijie RG-S6220-H Series Bedienungsanleitung

Ruijie

Ruijie RG-IS2712G Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5000-E Series Anleitung zur Verwendung

Ruijie

Ruijie RG-S6000C-48GT4XS-E-AC DCN Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600G-I Series Bedienungsanleitung

Ruijie

Ruijie RG-CS83 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS86 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S8600 Series Bedienungsanleitung

Ruijie

Ruijie RG-S2928G-E Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung