Runxin 53515 Bedienungsanleitung

Multi-functional Flow Control Valve for

Water Treatment Systems

53515(F99B1)

53615(F99B3)

63515(F99A1)

63615(F99A3)

73515 (F99D1)

73615 (F99D3)

User Manual

Please read this manual in details before using the valve

and keep it properly in order to consult in the future.

0WRX.466.596

Rev.A.1808

International Patent Public No.: WO 2006/007772

China Patent No.: ZL02220153.X,

ZL201410025506.8

US PatentNo.:7549446

IndiaPatent No: 232582

Russia Patent No.: 2349819

SouthKoreaPatentNo.: 10-0914137

Mexico Patent No.: 268581

Australia Patent No.: 2005263257

Philippine Patent No.: 1-2006-502553

Taiwan Patent No.: M287896

MODEL 53515/53615/63515/63615/73515/73615

Before the valve put into use, please fill in the below content so as to

help us to refer in the future.

Softener System Configuration

Tank Size：Dia. mm, Height mm;

Resin Volume L; Brine Tank Capacity L;

Hardness of Raw Water mmol/L;

Pressure of Inlet Water MPa;

Control Valve Model ; Number ;

The Specification of Drain Line Flow Control ;

Injector No. .

Water Source: Ground-water□Filtered Ground-water □

Tap Water □ Other .

Parameter Set

Parameter

Unit

Factory

Default

Actual Value

Time of Day

h:m

Random

Control Mode A-01/02/03/04 (Only

suited for 63615/73615),53515 only

have A-01/02

A-01

Water Treatment Capacity（Meter

type）

200.0

Service Days（Time clock type, by

days）

Regeneration Time

h:m

02:00

Backwash Time

min.:sec.

10:00

Interval Backwash Times (Only suited

for 73515/73615)

F-00

MODEL 53515/53615/63515/63615/73515/73615

Rinsing Frequency(Only suited for

53515/53615)

F-00

Brine Draw Time (It is not suit for

53515/53615)

min.:sec.

60:00

Slow Rinse Time(It is not suit for

53515/53615)

min.:sec.

45:00

Fast Rinse Time

min.:sec.

10:00

Brine Refill Time(It is not suit for

53515/53615)

min.:sec.

05:00

Maximum Interval Regeneration Days

(Meter type)

Output Mode b-01/2

b-01

If there is no special requirement when product purchase, we choose

3# drain line flow control（With 2 holes of φ6）and 3# injector（7703）for

the standard configuration for 63515/63615/73515/73615.

MODEL 53515/53615/63515/63615/73515/73615

Catalogue

Notice

1. Product Overview...................................................................................3

1.1. Main Application &Applicability....................................................3

1.2. Product Characteristics................................................................3

1.3. Service Condition.........................................................................6

1.4. Product Structure and Technical Parameters..............................7

1.5. Installation..................................................................................10

2. Basic Setting & Usage .........................................................................14

2.1. The Function of PC Board.........................................................15

2.2. Basic Setting & Usage...............................................................16

3. Applications..........................................................................................20

3.1. Flow Chart..................................................................................20

3.2. The Function and Connection of PC Board...............................22

A. Signal Output Connector..............................................................24

B. Interlock........................................................................................28

C. Pressure Relief Output.................................................................28

D. Remote Handling Connector........................................................29

E. Interlock System...........................................................................29

F. Series System...............................................................................30

3.3. System Configuration and Flow Rate Curve.............................30

3.4. Parameter Settlement................................................................33

3.5. Parameter Enquiry and Setting..................................................35

3.6. Trial Running..............................................................................40

3.7. Trouble-Shooting........................................................................41

3.8. Assembly & Parts.......................................................................46

4. Warranty Card......................................................................................55

MODEL 53515/53615/63515/63615/73515/73615

Notice

To ensure normal operation of the valve, please consult with

professional installation or repairing personnel before use it.

If there are any of pipeline engineering and electric works, there must

be finished by professional at the time of installation.

Do not use the control valve with the water that is unsafe or unknown

quality.

Depending on the changing of working environment and water

requirement, each parameter of softener should be adjusted accordingly.

When the water treatment capacity is too low, please check the resin.

If the reason is shortage of resin, please add; if the resin is turn to

reddish brown or broken, please replace.

Test water periodically to verify that system is performing satisfactorily.

Ensure that there is solid salt all the time in the brine tank in the course

of using, when this valve is used for softening. The brine tank should be

added the crystalline coarse salt only, at least 99.5% pure, forbidding

use the small salt.

Do not put the valve near the hot resource, high humidity, corrosive,

intense magnetic field or intense librations environment. And do not

leave it outside.

Forbidden to carry the injector body. Avoid using injector body as

support to carry the system.

Forbidden to use the brine tube or other connectors as support to carry

the system.

Please use this product under the water temperature between 5~50 ℃,

water pressure 0.2～0.6MPa. Failure to use this product is under such

conditions voids the warranty.

If the water pressure exceeds 0.6MPa, a pressure reducing valve must

be installed before the water inlet. While, if the water pressure is under

MODEL 53515/53615/63515/63615/73515/73615

0.2MPa, a booster pump must be installed before the water inlet.

PPR pipes, corrugated pipes, or UPVC pipes are recommended for

pipe installation and aluminum-plastic pipes should be avoided.

Do not let children touch or play, because carelessness operating may

cause the procedure changed.

When the attached cables or transformer of this product is broken, they

must be changed to the one that is from our factory.

MODEL 53515/53615/63515/63615/73515/73615

1. Product Overview

1.1. Main Application &Applicability

Used for softening, demineralization or filtration water treatment systems

53515/53615(Filtration)

Be suitable for swimming pool filtration system

Filtration system

Activated carbon filter or sand filter for RO pretreatment system.

63515/63615 (Down-flow regeneration)

73515/73615(Up-flow regeneration)

Be suitable for ion-exchange equipment, the raw water hardness

≤6.5mmol/L.

Boiler softening water system

RO pretreatment softening system, etc.

1.2. Product Characteristics

Simple structure and reliable sealing

It adopts hermetic head faces with high degree pottery and

corrosion resistance for opening and closing. It combines with Service,

Backwash, Brine Draw, Slow Rinse, Fast Rinse and Brine Refill.

No water passes the valve during regeneration in single tank type

Brine refill is controlled by electronic ball valve

During service, electronic ball valve will control to start the brine refill

so as to shorten the regeneration cycle time. 63515/63615 brine refilled

with hard water, 73515/73615 brine refilled with soft water.

Variety of installation methods

Use side-mounted connector to change the valve from top-mounted

to side-mounted. Screen is moveable.

Manual function

Realize regeneration immediately by pressing “ ” at any time.

Long outage indicator

MODEL 53515/53615/63515/63615/73515/73615

If outage overrides 3 days, the time of day indicator “12:12” will flash

to remind people to reset new time of day. The other set parameters do

not need to reset. The process will continue to work after power on.

LED dynamic screen display

The stripes on dynamic screen flash, they indicate the control valve

is in service; otherwise, it is in regeneration cycle.

Buttons lock

No operations to buttons on the controller within 1 minute, button

lock indicator lights on which represents buttons are locked. Before

operation, press and hold the and buttons for 5 seconds to unlock.

This function can avoid incorrect operation.

It can choose all models by program selection

When all symbols light on, press and hold “ ” and “ ” buttons

more than 2 seconds to enter the menu of valve model selection. Press

“ ”and“ ” buttons to select the requested model, then press “ ”

button to save the selection. Reconnect the power, the model will be

showed on display board.

Interlock function

It has a function of interlock to realize only one valve in regeneration

but the other valves are in service while several valves parallel in system.

In multi-steps treatment systems such as RO pre-treatment, when

several valves are in series, there is only one valve in regeneration or

washing to ensure pass water all the times. (Application refers to Figure

3-9)

Signal output(Take F99A/D as example)

There is a signal output connector on main control board. It is

applied for controlling external wiring (Refer to Figure 3-1 to Figure 3-8).

There are two kinds of output modes: b-01 mode: Turn on when

start regeneration and shut off at the end of regeneration; b-02 mode:

Signal is only available at intervals of each status.

MODEL 53515/53615/63515/63615/73515/73615

Remote handling input

This connector can receive external signal, used together with PLC,

and computer etc. to control the valve. (Application refers to Figure 3-11)

Pressure relief output

The valve will cut off feeding water to drain line when it switches in

regeneration cycles (Same as signal output b-02). Thus in some water

treatment system, e.g. Deep Well, one booster pump was installed on

the inlet to increase the system water feeding pressure, this cut-off will

cause pressure on inlet rising too fast to damage the valve. Pressure

Relief Output can be used to avoid this problem. (Application refers to

Figure 3-10)

All parameters can be modified

According to the water quality and usage, the parameters in the

process can be adjusted.

Four kinds of meter type can be selected (Suit for 63615/73615)

Mode

Name

Instruction

A-01

Meter

Delayed

Regenerate on the day although the available volume of

treated water drops to zero (0). Regeneration starts at the

regeneration time.

A-02

Meter

Immediate

Regenerate immediately when the available volume of

treated water drops to zero (0).

MODEL 53515/53615/63515/63615/73515/73615

A-03

Intelligent

Meter

Delayed

Meter Delayed Regeneration type, but by setting Resin

Volume, Feed Water Hardness, Regeneration Factor, the

controller will calculate the System Capacity. Regeneration

mode is the same as A-01.

A-04

Intelligent

Meter

Immediate

Meter Immediately Regeneration Type, but by setting Resin

Volume, Feed Water Hardness, Regeneration Factor, the

controller will calculate the System Capacity. Regeneration

mode is the same as A-02.

Maximum interval regeneration days (Suit for 63615/73615)

Under the situation of service reaching the setting days and the

volume not yet, it could enter into regeneration process or fast rinse

forcibly when current time is the same as regeneration time.

1.3. Service Condition

Runxin valve should be used under the below conditions:

Items

Requirement

Working

conditions

Water

pressure

0.2MPa～0.6MPa

Water

temperature

5℃～50℃

Working

environment

Environment

temperature

5℃～50℃

Relative

humidity

≤95%（25℃）

Electrical

facility

AC100～240V/50～60Hz

Inlet water

quality

Water

turbidity

Filter (53515/53615)＜20FTU

Down-flow regeneration softener (63515/63615)＜5FTU

Up-flow regeneration softener (73515/73615)＜2FTU

Water

hardness

First Grade Na+＜6.5mmol/L；Second Grade Na+＜

10mmol/L

Free chlorine

＜0.1mg/L

Iron2+

＜0.3mg/L

CODMn

＜2mg/L（O2）

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Runxin Steuereinheit Handbücher

Runxin

Runxin F104 A Bedienungsanleitung

Runxin

Runxin N74Q1 Bedienungsanleitung

Runxin

Runxin 63518 Bedienungsanleitung

Runxin

Runxin F56A Bedienungsanleitung

Runxin

Runxin F139 Bedienungsanleitung

Runxin

Runxin 63504 Bedienungsanleitung

Runxin

Runxin F79A-LCD Bedienungsanleitung

Runxin

Runxin 53520 Bedienungsanleitung

Runxin

Runxin 63504 Bedienungsanleitung

Runxin

Runxin 55504 Bedienungsanleitung

Runxin

Runxin F71B1 Bedienungsanleitung

Runxin

Runxin 51215 Bedienungsanleitung

Runxin

Runxin 73605 Bedienungsanleitung

Runxin

Runxin 17603 Bedienungsanleitung

Runxin

Runxin 51240B (F112BS) Bedienungsanleitung

Runxin

Runxin 63510 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung