Runxin 63504 Bedienungsanleitung

Multi-functional Flow Control Valve for

Water Treatment Systems

63504,63504B (Old Model No.: F63C1,F63G1)

63604,63604B (Old Model No.: F63C3,F63G3)

73504,73504B (Old Model No.: F68C1,F68G1)

73604,73604B (Old Model No.: F68C3,F68G3)

User Manual

Please read this manual in details before using the valve

and keep it properly in order to consult in the future.

0WRX.466.501

International Patent Public No.:

WO 2006/007772

China Patent No.: ZL02220153.X,

ZL200420078956.5

USPatentNo.:7549446

IndiaPatentNo.:232582

Russia Patent No.:2349819

SouthKoreaPatentNo.:10-0914137

Mexico Patent No.: 268581

Australia Patent No.: 2005263257

Philippine Patent No.: 1-2006-502553

Taiwan Patent No.:M287896

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

Before the valve put into use, please fill in the below content so as to

help us to refer in the future.

The Program Type Setting (Operation by professional)

When all symbols light no, press and hold and buttons for 5

seconds to enter the menu of valve model selection. Please set the

program type in accordance with the product type. (Time clock type

by days or hours or Meter type)；for example，F63C1 or F63G1 should be

set to F63B1; F63C3 or F63G3 should be set to F63B3. You couldn’t set

to other type.)

Softener System Configuration

Tank Size：Dia. mm，Height mm；

Resin Volume L；Brine Tank Capacity L；

Hardness of Raw water mmol/L；

Pressure of Inlet Water MPa；

Control Valve Model ；Number ；

The Specification of Drain Line Flow Control ；

Injector No. .

Water Source: Ground-water□ Filtered Ground-water □Tap Water □

Other .

Parameter Set

Parameter

Unit

Factory

Default

Actual Value

Control Mode A-01（02，03，

04）

A-01

Unit Mode HU01（02，03）

HU01

Water Treatment Capacity

（Meter type）

Service Days（Time of clock

type, by days）

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

Service Hours （Time clock

type, by hours）

Regeneration Time

02∶00

Backwash Time

Min.

Brine & Slow Rinse Time

Min.

Brine Refill Time

Min.

Fast Rinse Time

Min.

Interval Regeneration Days

Output Mode b-01（02）

b-01

If there is no special requirement when product purchase, we choose

5# drain line flow control and 9# injector for the standard configuration.

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

Catalogue

Notice ...........................................................................................................

1. Product Overview.....................................................................................

1.1. Main Application & Applicability .....................................................

1.2. Product Characteristics..................................................................

1.3. Service Condition...........................................................................

1.4. Product Structure and Technical Parameters................................

1.5. Installation......................................................................................

2. Basic Setting & Usage .............................................................................

2.1. The Function of PC Board.............................................................

2.2. Basic Setting & Usage...................................................................

3. Applications..............................................................................................

3.1. Softener Flow Chart.......................................................................

3.2. The Function and Connection of PC Board...................................

A. Signal Output Connector...........................................................

B. Interlock.....................................................................................

C. Pressure Relief Output..............................................................

D. Remote Handling Connector ....................................................

E. Interlock System........................................................................

F. Series System............................................................................

3.3. System Configuration and Flow Rate Curve.................................

3.4. Parameter settlement ....................................................................

3.5. Parameter Enquiry and Setting......................................................

3.7. Trouble-Shooting............................................................................

3.8. Assembly & Parts...........................................................................

4. Warranty Card..........................................................................................

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

Notice

To ensure normal operation of the valve, please consult with

professional installation or repairing personnel before use it.

If there are any of pipeline engineering and electric works, there must

be finished by professional at the time of installation.

Do not use the control valve with the water that is unsafe or unknown

quality.

Depending on the changing of working environment and water

requirement, each parameter of softener should be adjusted accordingly.

When the water treatment capacity is too low, please check the resin. If

the reason is shortage of resin, please add; if the resin is turn to reddish

brown or broken, please replace.

Test water periodically to verify that system is performing satisfactorily.

Sodium used in the water softening process should be considered as

part of your overall dietary salt intake. Contact doctor if you are on a low

sodium diet.

Ensure that there is solid salt all the time in the brine tank in the course

of using, when this valve is used for softening. The brine tank should be

added the clean water softening salts only, at least 99.5% pure,

forbidding use the small salt.

Do not put the valve near heat sources or surroundings with high

humidity, corrosive, intense magnetic field or intense librations

environment.And do not leave it outside.

Forbidden to carry the injector body. Avoid to use injector body as

support to carry the system.

Forbidden to use the brine tube or other connectors as support to carry

the system.

Please use this product under the water temperature between 5～

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

50℃,water pressure 0.15～0.6MPa. Failure to use this product under

such conditions voids the warranty.

If the water pressure exceeds 0.6Mpa, a pressure reducing valve

must be installed before the water inlet. While, if the water pressure

under 0.15MPa, a booster pump must be installed before the water inlet.

It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,

instead of TTLSG pipe.

Do not let children touch or play, because careless operating may

cause the procedure changed.

When the attached cables of this product and transformer are changed,

they must be changed to the one that is from our factory.

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

1. Product Overview

1.1. Main Application & Applicability

Used for softening or demineralization water treatment systems

Be suitable for

Residential softening system

Ion exchange equipment

Boiler softening water system

RO pretreatment softening system, etc.

1.2. Product Characteristics

Simple structure and reliable sealing

It adopts hermetic head faces with high degree pottery and

corrosion resistance for opening and closing. It combines with Service,

Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

No water pass the valve in regeneration in single tank type.

Manual function

Realize regeneration immediately by pushing manual button at any

time.

Long outage indicator

If outage overrides 3days, the time of day indicator “”will flash to

remind people to reset new time of day. The other set parameters do not

need to reset. The process will continue to work after power on.

LED dynamic screen display

The stripe on dynamic screen flash, it indicates the control valve is

in service, otherwise, it is in regeneration cycle.

Buttons lock

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

No operations to buttons on the controller within 1 minute, button

lock indicator light on which represent buttons are locked. Before

operation press and hold the “ ”and“ ” buttons for 5 seconds to

unlock. This function can avoid incorrect operation.

Interval backwash times (Suitable for F68)

It could set up interval backwash times for F68 up-flow regeneration

valve which means several times of services but one time of backwash.

The setting of interval backwash time depends on the local water

turbidity. (The lower the turbidity is , the longer of the interval backwash

time can be set)

It can choose time clock type or meter type by program

selection

When all symbols light no, press and hold and buttons for 5

seconds to enter the menu of valve model selection. Please set the

program type in accordance with the product type. (Tim clock type by

days or hours or meter type) (Notice: The meter type product has one

flow meter and flow meter cable, but the time clock type doesn’t have).

Four kinds of meter type can be selected ( Suite for F63C3,

F68C3)

Model

Name

Instruction

A-01

Meter

Delayed

Regenerate on the day although the available volume

of treated water drops to zero (0). Regeneration starts

at the regeneration time.

A-02

Meter

Immediate

Regenerate immediately when the available volume of

treated water drops to zero(0).

A-03

Intelligent

Meter

Delayed

Meter Delayed Regeneration type, but by setting Resin

Volume, Feed Water Hardness, Regeneration Factor,

the controller will calculate the System Capacity.

A-04

Intelligent

Meter

Immediate

Meter Immediately Regeneration Type, but by setting

Resin Volume, Feed Water Hardness, Regeneration

Factor, the controller will calculate the System Capacity.

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

There are two kinds of regeneration modes for time clock type

When the program is set as time clock type by days (such as F63C1,

F68C1, etc.) it can be changed to be by hours by dialing the red switch

on main control board to “1” (Refer to the Figure 13). Pointing to “ON”

means the time clock type service by days.(attention: After dialing the

switch, please restart the power)

Interlock function

It has a function of interlock to realize only one valve in regeneration

but the other valves are in service while several valves parallel in system.

In multi-steps treatment systems such as RO pre-treatment, when

several valves are in series, there is only one valve in regeneration or

washing to ensure pass water all the times while different valves in

regeneration or washing.(Application refer to Figure 3-9)

Signal output

There is a signal output connector on the main control board. It is for

controlling external wiring (Refer to Figure from Figure3-1 to Figure

3-8).

There are two kinds of output modes:

b-01 Mode: Turn on start of regeneration and shut off end of

regeneration; b-02 Mode: Signal available only at intervals of

regeneration cycles and In service.

b-01

b-02

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3

Remote handling input

This connector can receive external signal, used together with PLC,

and computer etc. to control the valve. （Application refer to

Figure3-11）

Pressure relief output

The valve will cut off feeding water to drain line when it switches in

regeneration cycles(Same as signal output b-02). Thus in some water

treatment system, e.g. Deep Well, one booster pump was installed on

the inlet to increase the system water feeding pressure, this cut-off will

cause pressure on inlet rising too fast to damage the valve. Pressure

Relief Output can be used to avoid this problem. (Application refer to

Figure3-10)

Maximum interval regeneration days

Under the situation of service reaching the setting days and the

volume not yet, it could enter into regeneration process forcibly when

current time is the same as regeneration time.

All parameters can be modified

According to the water quality and usage, the parameters in the

process can be adjusted.

Andere Handbücher für 63504

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Runxin Steuereinheit Handbücher

Runxin

Runxin 17603 Bedienungsanleitung

Runxin

Runxin 63504 Bedienungsanleitung

Runxin

Runxin 53520 Bedienungsanleitung

Runxin

Runxin 53515 Bedienungsanleitung

Runxin

Runxin 63518 Bedienungsanleitung

Runxin

Runxin 63510 Bedienungsanleitung

Runxin

Runxin F79A-LCD Bedienungsanleitung

Runxin

Runxin F56A Bedienungsanleitung

Runxin

Runxin 51215 Bedienungsanleitung

Runxin

Runxin F104 A Bedienungsanleitung

Runxin

Runxin 55504 Bedienungsanleitung

Runxin

Runxin N74Q1 Bedienungsanleitung

Runxin

Runxin F71B1 Bedienungsanleitung

Runxin

Runxin 73605 Bedienungsanleitung

Runxin

Runxin F139 Bedienungsanleitung

Runxin

Runxin 51240B (F112BS) Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung