Russell Hobbs RHBI7WC1 Bedienungsanleitung

Model number(s):

RHBI7WC1 (SS)

For Customer Services & Spare Parts please call 0345 2088750

or visit us at https://mda.russellhobbs.com

IMPORTANT:

RETAIN FOR FUTURE REFERENCE

7 Bottle Built in Wine Cooler

Instruction Manual

Contents

Safety Instructions ………………………………………. 3-5

Electrical Safety ………………………………………. 5

Transportation & Handling ………………………………………. 5

Installing & Switch on your Appliance ………………………………………. 6

Before Switching On ………………………………………. 7

Product Overview ………………………………………. 8

Unit & Spare Parts ………………………………………. 8

Positioning & Installation ………………………………………. 9-10

Handle Installation ………………………………………. 10

Usage ………………………………………. 11-17

Door Reversal ………………………………………. 18-21

Energy Saving Advice ………………………………………. 22

Maintenance & Cleaning ………………………………………. 23-24

Internal Cleaning ………………………………………. 23

External Cleaning ………………………………………. 23

When not in Use ………………………………………. 23

Defrosting ………………………………………. 24

Trouble Shooting ………………………………………. 25-27

Connection to the Mains Supply ………………………………………. 28

Guarantee ………………………………………. 29

Technical Specification ………………………………………. 30

Product Fiche ………………………………………. 31

Safety Instructions

Important note: Please read this booklet before installing and switching on this

appliance. The manufacturer assumes no responsibility for incorrect installation

and usage as described in this booklet.

Warning: When positioning the appliance, ensure the supply cord is not

trapped or damaged.

Warning: Do not locate multiple portable socket-outlets or portable power

suppliers at the rear of the appliance.

•This model uses natural refrigerant gas as part of its cooling system. This

gas is known as R600a (Isobutene) and is environmentally friendly but can be

combustible. Care should therefore be taken when handling or transporting the

product to ensure that none of the refrigeration circuit components are

damaged,

•Do not obstruct ventilation openings in the appliance

•The appliance must not be placed or rested on its power cord.

•Do not use mechanical devices or other artificial means to accelerate the

defrosting process, such as a heater or a hair dryer.

•Do not use electrical appliances in the refrigerator compartment of the

appliance.

•Ifthis appliance is to replace an old refrigerator with a lock, the lock must be

removed as a safety measure before storing it or disposing of it. This is to

protect children from locking themselves inside the appliance.

•Old refrigerators and freezers contain insulation gases and refrigerant, they

must be disposed of properly. Contact your local authority or your dealer if

you have any questions. Please ensure that you do not damage the scrapunit

prior to being picked-up by the relevant waste disposal service.

•Do not use adaptors or extension leads when connecting the appliance to the

electrical power supply

•Do not plug in damaged plugs.

•Do not pull, twist or damage the power cable.

•Do not plug-in or un-plug the appliance with wet hands to prevent electrical

shock.

•This appliance can be used by childrenaged from 8 years and above and

persons with reduced physical, sensoryor mental capabilitiesor lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children should not play with the appliance.

•Children aged from 3 to 8 years are allowed to load and unload this appliance.

•This appliance is designed to be used by adults, do not allow childrento play

with the appliance or letthem hang over the door.

•Do not place explosive or flammable material in your appliance for your own

safety.

•Do not cover the body or the top of the appliance

•Fix down the accessories in the appliance during transportation to prevent

damage to them.

•If the appliance is left empty for long periods, switch off, defrost, clean, dry and

leave the door open to prevent mount developing within the appliance.

•This refrigerating appliance is intended to be used exclusively for the storage of

wines.

•This refrigerating appliance is not suitable for freezing foodstuffs.

Electrical Safety

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET

•Before switching on, make sure that the voltage of your electricity supply is the

same as that indicated on the rating plate. This product is designed to operate

on 220 –240V AC; 50Hz. Connection to any other power source may damage

the unit.

•This product may be fitted with a non re-wireable plug. If it is necessary to

change the fuse in the plug, the fuse cover must be refitted. If the fuse cover

becomes lost or damaged, the plug must not be used until a suitable

replacement is obtained.

•If the plug has to be changed because it is not suitable for your socket, or

becomes damaged in any way, it should be cut off and an appropriate plug

fitted following the wiring instructions. This should be carried out by a qualified

electrician. The plug removed must be disposed of safely, as insertion into a 13

Amp socket is likely to cause an electrical hazard.

Transportation and Handling

For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the

base and rear corners of cabinet. Lift the refrigerator carefully. Never use the door

handles for lifting. To move the refrigerator on a flat level surface, tilt it slightly

backwards and push backwards.

This unit is heavy and could cause injury –ensure there are adequate people

present to move the appliance.

Installing and Switching on Your Appliance

•Operating voltage for your appliance is 220-240Vat 50Hz.

•Before plugging in the power supply, ensure that the voltage on the rating label

corresponds to the working voltage of your electrical system in your home.

•Insert the plug into an efficient Ground (Earth) connection. If the socket hasno

Ground (Earth) contact or the plug does not match, we suggestyou call an authorised

electrician for assistance.

•Place your appliance in an area that is not exposed to direct sunlight.

•Your appliance should be placed at least 10cm away from stoves, ovens and other

heating cores.

•This appliance should never be used outdoors or left in the rain.

•When your appliance is placed nextto achest freezer or freezer, there should be at

least 10cms betweenthem to prevent humidityon the outer surface.

•Do not place anything on your appliance and install the unit in a suitable place so that

there is at least 30cm clearance above the appliance.

•If placing your appliance nextto kitchen cabinets, leave 5cm betweenthem.

•The rear of the appliance should be at least 6cm away from the back wall.

•The appliance must be used in the vertical position and on a flat surface.

•To level the appliance, use the adjustable feet on the appliance.

•Do not place your appliance on a carpeted surface as this will prevent adequate

ventilation.

•This appliance should only be placed on a flat, firm surface.

•Choose a dry and well-ventilated space.

•The appliance should be positioned so that the plug is easily accessible.

•If you need help or are unsure how to install the unit, please contact Customer

Services on 0345 208 8750 or visit https://mda.russellhobbs.com.

WARNING! During use, service and disposal of the appliance,

please pay attention to symbol similar to the one shown, which is

located on rear of appliance (rear panel or compressor) and with a

yellow or orange colour. It’s risk of fire warning symbol. There are

flammable materials in refrigerant pipes and compressor. Please

be far away from fire source during use, service and disposal.

Before Switching On

•Before using your appliance, add a teaspoon of bicarbonate of soda to warm

water and with a damp cloth wipe down all parts of the new appliance, then

repeat the process with a clean damp cloth and dry (ensure the appliance is not

connected to the power when performing this task).

•Remove all transport tapes and foam protection pieces. Clean the interior with

a cloth dampened in lukewarm soap and water. Wipe with clean water and

wipe dry.

•There may be an odour when you first switch on the appliance, it will disappear

when the appliance starts to cool.

•When the appliance has been positioned, adjust the feet to ensure the unit is

stable. This is essential to ensure quiet running and proper door opening

/closing.

•Connect to the electrical socket but do not switch the power to the cooler on

for at least 3 hours. The coolant within the product needs time to settle after it

has been transported and put in to position, failure to do this will affect the

cooling performance of your appliance.

•Once the appliance has settled turn on the appliance, locate the temperature

controls on the product and set it to the required temperature.

•You may hear faint gurgling or bubbling sounds when the refrigerant is pumped

to the cooling system and through the coils or tubing at the rear of the

appliance. When the compressor is in operation you may hear a slight whirring

sound or pulsating noise. The temperature controls regulate the operation of

the compressor, and you may hear a slight click as it cycles in and out (this is

normal).

•To save energy, you should minimize the frequency and duration of door

opening.

Unit Parts & Spare Parts

Before installation, check that all parts detailed in the product overview are

present. If any parts are missing, please contact the Customer Service team on

0345 208 8750 or visit us at https://mda.russellhobbs.com

Product Overview

1. Upper hinge

2. Handle

3. Controls & display

4. Glass door

5. Bottle racks

6. Lower hinge

7. Adjustable feet

8. Vents

9. Door reversal left top

hinge

10. Door reversal left bottom

hinge

Positioning & Installation

•This appliance can be installed as a freestanding or a built in unit. The

clearances shown in the below drawing should be followed for both types of

installation.

•Avoid damaging the product during installation, positioning of the appliance

requires two people in order to avoid injuries or damage to the appliance.

•Your appliance should not be located in direct sunlight or exposed to

continuous heat or extremes of temperature (e.g. next to a radiator or boiler). If

this is not feasible, then you should install an insulation plate between the

appliance and the adjacent heat source.

•You should check whether there is an electrical socket available, which will be

accessible after your appliance is installed.

•Place the appliance flatly and firmly on a solid base. The appliance is fitted with

adjustable feet, which should be used to level the appliance.

•Be sure to leave enough space for the opening of the door, to avoid damage to

the appliance or personal injury

•If installing as a built in unit the aperture size has to be a minimum of (H)875 x

(W)155 x (D)570mm. The depth dimensions in particular must be observed.

Important: The vent at the base of the appliance is for ventilation. Nothing

should be placed in front of this vent; otherwise your wine cabinet may not

operate properly.

•A decorative plinth can be fitted to the front of the base vent as long as the cut

out shown in the diagram below is made in the plinth. This cut out is required

whether the vent is removed or not.

Handle installation

To install the door handle follow the below steps:

1. Open the door of the appliance and move the door gasket slightly to one side

so that you can see two designated screws/holes for handle installation

2. Install the handle tightly as shown in the diagram below with the two screws

provided.

3. Ensure the door gasket falls back into place and that the door opens and

closes correctly.

9cm 9cm

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Russell Hobbs Küchengerät Handbücher

Russell Hobbs

Russell Hobbs RHBM11 Installationsanleitung

Russell Hobbs

Russell Hobbs DualChef RHMC60 Installationsanleitung

Russell Hobbs

Russell Hobbs 22241 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24530-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 24180 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 20920-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHSM-025 Installationsanleitung

Russell Hobbs

Russell Hobbs 21850 -56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHPK1000 Installationsanleitung

Russell Hobbs

Russell Hobbs AURA 21500-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 21850 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 14101 Installationsanleitung

Russell Hobbs

Russell Hobbs RHSP801 Series Installationsanleitung

Russell Hobbs

Russell Hobbs Desire Slice & Go 20346-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHBI18WC1 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHSB250 Bedienungsanleitung

Russell Hobbs

Russell Hobbs Cook@Home 17936-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 20355-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs 26520 Bedienungsanleitung

Russell Hobbs

Russell Hobbs Illumina 20211-56 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHFS02 Installationsanleitung

Russell Hobbs

Russell Hobbs 18023 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHSB150 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHPC3000 Installationsanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung