Safety Vision ROADRECORDER 8000 Bedienungsanleitung

ROADRECORDER®8000 NVR

USER GUIDE

Important Notices

Title: RoadRecorder 8000 NVR User Guide

Firmware Version: 5.0.2

Document Version: 1

Revision: 0

Safety Vision attempts to provide information contained

in this manual based on the latest product information

available at the time of publication. However, because of

Safety Vision’s policy of continual product improvement,

Safety Vision reserves the right to amend the information in

this document at any time without prior notice.

This material is condential and the property of Safety

Vision. It is shared with your company for the sole purpose

of helping you with the operation of the described

equipment.

Safety Vision makes no warranty of any kind with regard

to this material, including, but not limited to, the implied

warranties of merchantability and tness for a particular

purpose. Safety Vision shall not be liable for errors

contained herein or for incidental or consequential damages

in connection with the furnishing, performance, or use of

this material.

Safety Vision expressly disclaims all responsibility and

liability for the installation, use, performance, maintenance,

and support of third-party products. Customers are advised

to make their independent evaluation of such products.

No part of this document may be photocopied, reproduced,

or translated to another language without the prior written

consent of Safety Vision.

Safety Vision® is a registered trademark of Safety Vision, LLC. All

other products or name brands mentioned in this document are

trademarks of their respective

owners. For more information about Safety Vision and its

products, go to www.safetyvision.com or call 800-880-8855.

2ROADRECORDER 8000 NVR USER GUIDE

Table of Contents

Components 2

Front Panel 2

Rear Panel 3

Hard Drive Cannister 4

LCD Control Panel (50-000001) 5

Installation 6

Main Wiring Diagram 6

Flat Mount 8

Hard Drive Cannister 9

SIM and SD Cards 10

LCD Control Panel Operation 11

Conguration 12

Connecting to the NVR 12

Help Windows 13

Product Details 14

Live View 15

Snapshot Viewer 16

Firmware / Cong 17

Storage 18

Network Settings 19

Date / Time 20

Change Password 21

Startup & Shutdown 22

Audio/Video Settings 23

Sensor Settings 24

Recording 25

Thresholds 26

GPS / GEO Fence 27

Camera 28

Sensor Status 29

Recorder Status 30

Tag Events 31

Appendix A: Specications 32

Appendix B: Dimensions 33

Appendix C: Axis Device Conguration 34

Appendix D: GPS Coordinate 35

Conversion 35

ROADRECORDER 8000 NVR USER GUIDE 1

Components

Front Panel

1 - LED Status Lights - Displays the status of

various NVR operations (see table below).

2 - LAN Port - Access port for the NVR’s

Conguration menus. The IP is182.168.1.200.

3 - USB Ports - USB 3.0 ports for optional

external accessories.

4 - Hard Drive Lock - Insert the supplied

security key and turn 90 degrees left to unlock

the hard drive. Turn the key 90 degrees right to

lock the hard drive.

5 - SD Card - Currently under development.

6 and 7 - SIM Cards - Currently under development.

8 - SIM and SD Cards Access Panel - Remove the two

screws to remove the panel and access the SIM and SD cards.

9 - Hard Drive Bay - Insert or remove the removable hard

drive. See the Hard Drive chapter for more information.

LED Color Status

Green On: NVR is ready to record

Blink: NVR Power on (startup) condition met

Red On:Vehicle power failure, in ooad/shutdown

sequence

Blink: Shutdown condition met, shutting down

after ooad

O NVR shut down complete

Green On: All cameras initialized correctly and have video

Blink: Camera initialization in progress

Red On: One or more cameras has video loss

Blink: One or more camera initializations failed

Green On:Writing to Primary

Red On:Writing to Secondary

Green On: NVR running and recording

Blink: NVR running, but not recording currently

Red On: One or more events have been recorded

Blink: NVR shutting down

O NVR powered o

2ROADRECORDER 8000 NVR USER GUIDE

Rear Panel

1 - Main Power Harness - Supplies power to

the NVR from the Power Supply.

2 - USB Ports - USB 3.0 ports for optional

external accessories.

3 - Sensor Inputs - Inputs for 16 optional

external sensors (lights, brakes, optional

equipment, etc).

4 - Sensor Outputs - Outputs 12V @ 100 mA

to 16 optional sensor outputs.

5 - DVI-D Port - Connection for optional high

resolution external display.

6 - HDMI Port - Connection for optional high

resolution external display.

7 - DC Relay Bypass - [Vehicle battery voltage] @ 10 A for

powering optional external switches.

8 - GPS Antenna Port - Connection for external GPS

antenna.

9 - LAN2 Port - M12 Ethernet connector for connection of

an optional external Wi-Fi bridge.

10, 11, 12 - Wi-Fi Module Antenna Ports - Connect

external antennas for the internal Wi-Fi module.

13 and 14 - COM1 and COM2 - For future expansion.

15 - Audio Port - Connection for optional external

microphone.

16 - PoE Power Harness - Supplies 48V for Power over

Ethernet (PoE) from the Power Supply

17 - Grounding Stud

ROADRECORDER 8000 NVR USER GUIDE 3

Hard Drive Cannister

1 - Power Supply - Connect and external

power supply when removed and connected to

a PC.

2 and 3- Status LED - Displays power and

activity status of the hard drive cannister when

connected to a PC.

4 - USB Port - USB 3.0 port for connection to a

PC.

5 - Data Port - Connects with the NVR when

inserted intot he NVR’s hard drive bay.

4ROADRECORDER 8000 NVR USER GUIDE

LCD Control Panel (50-000001)

The 50-000001 LCD Control Panel is designed

to provide advanced functionality with the

RoadRecorder 8000. See the 50-000001 LCD

Control Panel Operation chapter for more

information.

1 - LCD Display - Displays alerts and statuses.

2 - Esc Button - Press the Esc Button to cancel

the current command a return to the display.

3 - Navigation Keys - Use the left, right, up,

and down keys to navigate menus or move the

cusor. Press the center key to enter a command.

4 - Event Button - Press the Event Button to

save an event.

5 - Error Status LED - Displays solid red when an error

has occured, such as a disconnected camera. The LED

remains red until the error is corrected. Displays solid green

when no errors are present.

6 - Event Status LED - Displays solid red when an event

is recording. The LED remains red until recording is nished.

Displays solid green otherwise.

7 - Ooading Status LED - Displays solid red when

recorded data is being ooaded to the SD card or HDD.

ROADRECORDER 8000 NVR USER GUIDE 5

Installation

Main Wiring Diagram

Typical Conguration

Sensor Wire Color Description

A1 Blue Brake

A2 Yellow Right Turn

A3 Green Left Turn

A4 Violet Head Lights

A5 Brown Front Door

A6 White Wheel Chair

A7 Grey Stop Request

B1 Orange Ignition

B2 Red Open

B3 Open

B4 Open

B5 Open

B6 Open

B7 Open

P1 Red Main Power

P2 Black Main Ground

Fuse Requirements

P1 Red Main Power (7.5 amp)

B1 Orange Ignition (3 amp)

6ROADRECORDER 8000 NVR USER GUIDE

WARNING: REMOVING MAIN THE MAIN POWER SOURCE WHILE THE NVR IS RECORDING MAY

RESULT IN CORRUPT DATA.

Be aware that removing and reconnecting power to the NVR in short periods of time (such as during some vehicle

maintenance procedures) may cause hard drive failure, leading to corrupt recorded video and other data. Safety Vision

recommends properly shutting down the NVR before removing the main power harness when cycling of the vehicle’s

power is to occur:

1. Remove the ignition source.

2. Wait for the NVR to completely power down.

The NVR may be congured to record for a period after the ignition is turned o.

3. OBSERVE THAT ALL STATUS LEDS HAVE TURNED OFF.

4. Remove the main power harness.

ROADRECORDER 8000 NVR USER GUIDE 7

Flat Mount

Secure the NVR to the surface with self-tapping

screws or rivets.

Ensure that the front panel of the NVR remains

accessible and there is a minimum 2.5 inches of

clearance for cables.. Do not install the NVR in

an area of the vehicle cabin that could interfere

with the safe operation of the vehicle.

8ROADRECORDER 8000 NVR USER GUIDE

Andere Handbücher für ROADRECORDER 8000

Inhaltsverzeichnis

Andere Safety Vision Netzwerk-Hardware Handbücher

Safety Vision

Safety Vision roadrecorder 7006 series Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4116 Installationshandbuch

Safety Vision

Safety Vision RoadRecorder 7000 Bedienungsanleitung

Safety Vision

Safety Vision ROADRECORDER 8000 NVR Bedienungsanleitung

Safety Vision

Safety Vision ROADRECORDER 8400 NVR Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung