Sage The Boss To Go Bedienungsanleitung

the Boss To Go™

Instruction Book - BPB550

Nurture

via

Nature

Download from:

sageappliances.co.uk/the-Boss-To-Go

Appliance Science

& Recipe e-Book

IMPORTANT

SAFEGUARDS

At Sage‰by Heston

Blumenthal‰we are very

safety conscious. We design

and manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

SAGE

RECOMMENDS

SAFETY FIRST

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE

FOR FUTURE REFERENCE

• Before using for the ﬁrst

time please ensure that your

electricity supply is the same

as shown on the rating label on

the underside of the appliance.

If you have any concerns please

contact your local electricity

company.

• Your Sage‰by Heston

Blumenthal‰appliance

includes a BS 13 amp moulded

mains plug on the supply cord.

• Should you need to change

this plug, please complete the

rewiring as follows (after safe

disposal of the moulded plug).

• Please note that a cut off plug

inserted into a socket is a

serious danger risk

• Wires are coloured as follows:

−Blue = Neutral

−Brown = Live

−Green & Yellow = Earth

• As the colours of the wire

may not correspond with the

coloured markings which

identify the terminals in

your plug, please refer to

the following:

−The Blue wire must be

connected to the terminal

which is marked ‘N’.

−The Brown wire must

be connected to the

terminal which is marked

with the letter ‘L’.

−The Green & Yellow wire must

be connected to the terminal

which is marked with the

letter E or the earth symbol .

• Please note that if a 13 amp

plug is used, a 13 amp fuse

should be used.

• Remove and safely discard

any packaging material and

promotional labels before use.

• To avoid choking hazard for

young children, remove and

safely dispose the protective

cover ﬁtted on the power plug.

• This appliance is for household

use only. Do not use it in

moving vehicles or boats, do

not use it outdoors, and do not

use it for anything other than

its intended use. Misuse can

cause injury.

• This appliance shall not be

used by children. Keep the

appliance and its cord out of

reach of children.

• Cleaning and user

maintenance shall not be

made by children without

supervision.

• Children shall not play with

this appliance.

• This appliance can be used by

persons with reduced physical,

sensory or mental capabilities

or lack of experience and

knowledge if they have

been given supervision or

instruction concerning use of

the appliance in a safe way and

if they understand the hazards

involved.

• Do not use the appliance near

the edge of a countertop or

table. Ensure the surface is

level, clean and free of water

and other substances. Please

be aware that vibration during

use may cause the appliance

to move.

• Do not use the appliance on

(or close to) a hot gas or electric

burner, or where it could touch

a heated oven or surface.

• Do not allow the cord to hang

over the edge of a countertop,

or to become knotted.

• To avoid electric shock, do

not immerse the cord, plug or

motor base in water (or other

liquids).

• Installation of a residual

current device (a standard

safety switch on your wall

socket) is recommended to

provide additional safety

protection when using

appliances. It is advisable

that a safety switch (with

a rated residual operating

current not more than 30mA)

be installed in the electrical

circuit supplying the appliance.

Contact your electrician for

further professional advice.

• In order to avoid the possible

hazard of the blender starting

by itself due to inadvertent

resetting of the overload

protector on the motor, do not

attach an external switching

device (such as a timer) or

connect the blender to a circuit

that can regularly switch the

blender on and off.

• Do not operate appliance with

a damaged cord or plug, or

after appliance malfunctions, or

if dropped or damaged in any

way. Stop use immediately and

contact Sage by phone or email

for replacement or repair.

• All maintenance (other than

cleaning) is to be done by

an authorised Sage Service

Centre.

• Regularly inspect the

supply cord, plug and actual

appliance for any damage.

If found damaged in any

way or maintenance other

than cleaning is required,

immediately cease use of

the appliance and contact

Sage Customer Service on

0808 178 1650.

SAFEGUARDS

FOR YOUR

EXTRACTOR

BLENDER

• Wash all cups, blade assembly

and other accessories with

warm soapy water before

ﬁrst use.

• Use only cups, blade assembly

and accessories that are

supplied with this blender.

The use of attachments or

accessories not manufactured

or speciﬁed by Sage may cause

the risk of ﬁre, electrical shock,

or injury.

• Always ensure the blender is

assembled properly before

using. Blades must be ﬁrmly

secured to cup before operation

to ensure internal contents do

not escape or spray.

• Never attempt to operate or

place the blade assembly onto

the motor base without the cup

in place.

• Under a heavy load, do not

operate continuously for more

than 10 seconds. Allow the

motor to rest for 1 minute

between uses on heavy loads.

A heavy load is deﬁned as per

the appliance safety standard

speciﬁed load (500mL

cup ﬁlled to the maximum

indicated level with a mixture

comprising two parts by

mass of soaked diced carrots

and 3 parts water). Any load

equivalent to this or heavier

should not be operated for

more than 10 seconds at a time.

Note that none of the recipes

supplied with this product are

considered heavier than

this load.

• Do not ﬁll the cup past the

MAX level marking as this will

cause the motor to strain under

heavy load and may cause

potential leakage. It will also

reduce blending performance.

Note that some mixtures

increase in volume when

blending.

• Do not put any parts or

accessories in a microwave.

• Do not blend carbonated

liquids, as they will expand.

• Do not leave the extractor

unattended when in use.

• Keep hands, ﬁngers, hair

and clothing away from the

extractor during use.

Always unplug at the wall

before touching the motor

coupling or surrounding area.

• Be careful when handling and

cleaning blades, as they are

very sharp. Mishandling of the

blades may cause injury.

• Avoid putting the cup on the

motor base while the motor is

still spinning.

• The blender is intended for

food or drinks preparation.

Do not use for anything

other than food or drinks.

Do not operate without any

ingredients in the cup.

• Never attempt to operate

with damaged blades, or with

utensils, or any foreign objects

inside the cup.

• Never blend hot or warm

ingredients in this blender.

• Do not put the cup in extremes

of heat or cold, for example

placing a cold cup into hot

water, or vice versa.

• Before moving the blender,

cleaning or putting it away for

storage, always turn the cup to

the off position and unplug at

the wall.

• Always disconnect from the

supply if left unattended

and before assembling,

disassembling or cleaning.

The symbol shown

indicates that this

appliance should not be

disposed of in normal

household waste. It should be

taken to a local authority waste

collection centre designated for

this purpose or to a dealer

providing this service.

For more information, please

contact your local council ofﬁce.

SAVE THESE

INSTRUCTION

Components

A. Kinetix®blade and bowl assembly

Contoured to the base of the blade

assembly to create rapid circulation,

with serrated central blades for extra

cutting performance.

B. Heavy duty metal coupling

For durable and long lasting

performance under demanding

conditions.

C. Heavy duty 1000W motor

High velocity power for

outstanding results.

D. Durable die-cast metal base

E. Portable lids

2 handy lids to take your smoothie

on the go.

F. 2 Large 500ml Tritan® Tumblers

One for you, one for me. Impact resistant

and dishwasher safe.

EASTMAN TRITAN™ COPOLYESTER

The tumbler cups are made with Eastman

Tritan™ copolyester, which is a tough, BPA-free

polymer used to make housewares products

that can stand up to extreme use and repeated

dishwasher cleaning. Products made from

Tritan™ are impact resistant and stay clear and

durable even after hundreds of cycles in the

dishwasher.

Assembly

BEFORE FIRST USE

• Before using your extractor for the ﬁrst

time, remove any packaging material and

promotional labels.

• Be careful when handling the blades as they

are extremely sharp.

• Wash the tumblers, lids, blade assembly and

attachments in warm soapy water with a soft

cloth. Rinse and dry thoroughly. All parts

(except motor base) may be washed in the

dishwasher, on the top shelf.

• When ﬁrst using your blender, you may

notice an odour coming from the motor.

This is normal and will dissipate with use.

ASSEMBLY

1. Remove blades and position the cup with

opening facing up.

2. Add ingredients avoiding ﬁlling past the

MAX line.

3. Fix the blade assembly in place with a

quarter turn in the clockwise direction.

Ensure the blade assembly collar is securely

in place before inverting the cup to blend.

Functions

OPERATION

• The blender will only work when the blades

and cup are correctly assembled. This

engages the safety interlock, and allows the

motor to run.

• When the cup and blade assembly is

correctly assembled with ingredients inside,

invert cup, and place onto the motor base

using the alignment graphics.

• To blend, securely hold the cup assembly

and twist clockwise on the base to the

ON position.

• When the desired consistency is reached,

turn tumbler anti-clockwise to release and

disengage the motor.

• Do not blend continuously for more than

60 seconds at a time. Allow the motor to rest

for 2 minutes before continuing.

• Ingredients can be pulsed by rotating the cup

within the bayonet positions, which will turn

the motor on and off.

• When ﬁnished blending, wait a few seconds

for the blades to stop spinning before lifting

the jar assembly off the motor base.

• Invert the cup and allow the ingredients to

run off the blades for a few seconds before

unscrewing blades. Hold by the blade collar,

and turn anti-clockwise to remove.

• For safety, turn the motor base off at the wall

and unplug when ﬁnished blending.

OVERLOAD PROTECTION SYSTEM

• The blender is equipped with an internal

self resetting overload protector to protect

the motor from damage under heavy or

continuous loads. If the extractor suddenly

stops during use, this protector may

have tripped.

• Remove the cup, unplug and leave it to cool

for at least 30 minutes. Do not replace the

cup assembly while cooling as the protector

may reset causing it to start unexpectedly.

• Tripping the protector indicates that the

extractor is being loaded too heavily, or

with excessive continuous use. Reduce the

amount of ingredients used or allow more

time in between blending to prevent it from

happening again, which will help preserve

the life of the motor.

• The MAX line is usually a good indicator to

prevent overly heavy loading, however some

especially dense combinations of ingredients

may still strain the motor. If the motor seems

to be straining or running slowly, only

operate for 10 seconds at a time, or reduce

the amount of ingredients used. Adding more

liquid can also help to loosen dense mixtures.

• Note that none of the recipes in the recipe

book provided with this product are

considered a heavy load.

Hints & Tips

• Never blend hot (or even warm) ingredients.

The blades form a seal with the cups, and

there is no venting for steam to be released.

• We recommend not blending longer than the

recommend times in the recipes provided

with this product, or no more than 1 minute

at a time. Ingredients in the cup may become

warm and cause internal pressure on the

seals making it difﬁcult to open or splatter

ingredients when opened. Allow to cool and

take care when opening.

• Always add liquids for optimum blending.

If the blending action is not causing

the ingredients to circulate, try adding

more liquid.

• If the results are lumpy, try reducing the

ingredients, or blending in batches.

• Run the extractor only for the appropriate

amount of time required – do not over blend

ingredients.

• If foods are thick, use a pulsing action by

twisting the cup to engage and disengage

the motor as needed. This will help

ingredients circulate.

• Do not exceed the maximum mark when

adding foods and liquids into the cup.

• To stop blending at any time, rotate the cup

anti-clockwise to disengage the motor.

• The maximum amount of ice cubes the

extractor can process is 4 from a standard ice

tray. This also applies to frozen fruit. Cut fruit

into pieces of a similar size to an ice cube

before freezing.

Troubleshooting

Motor doesn’t start or

blade doesn’t rotate • Check that the power plug is properly inserted into the power outlet.

• Overload Protection System may have operated (see below).

Blender stopped

suddenly while in use • This extractor has overload protection to prevent damage to the motor,

which may have operated. Unplug, remove the cup and allow the motor to cool

down for 30 minutes. Once cooled, you will be able to use as usual again.

• We recommend blending in smaller batches, or cutting ingredients into

smaller pieces. See Overload Protection System section for detailed

information.

Food is lumpy or

unevenly blended • This can happen when too much food is being blended at one time.

Try a smaller amount, and work in batches if necessary.

• The ingredients may be too large. Try cutting into smaller pieces.

For best results, ingredients should be in pieces no larger than 2cm.

Food sticks to blade

and cup • The mixture may be too thick. Try adding more liquid and/or pulsing

the blender.

Andere Handbücher für the Boss To Go

Inhaltsverzeichnis

Andere Sage Mixer Handbücher

Sage

Sage the3X Bluicer BJB615 Bedienungsanleitung

Sage

Sage BJB615 Bedienungsanleitung

Sage

Sage Kinetix Control BBL605UK Bedienungsanleitung

Sage

Sage Fresh & Furious BBL620W Bedienungsanleitung

Sage

Sage BBL910 Bedienungsanleitung

Sage

Sage the Kinetix Twist SBL405 Bedienungsanleitung

Sage

Sage Super Q BBL920 Bedienungsanleitung

Sage

Sage Kinetix Twist BBL405 Bedienungsanleitung

Sage

Sage the Q BBL820 Bedienungsanleitung

Sage

Sage 3X Bluicer Pro Bedienungsanleitung

Sage

Sage Kinetix Twist BBL405UKM Bedienungsanleitung

Sage

Sage the Vac Q BBL002 Bedienungsanleitung

Sage

Sage the Super Q SBL920 Bedienungsanleitung

Sage

Sage the Boss To Go BPB550 Bedienungsanleitung

Sage

Sage Boss To Go Chill Cup Bedienungsanleitung

Sage

Sage Vac Q Bedienungsanleitung

Sage

Sage the Super Q SBL920 Bedienungsanleitung

Sage

Sage the Kinetix Twist SBL405 Bedienungsanleitung

Sage

Sage the Boss To Go SPB550 Bedienungsanleitung

Sage

Sage 3X Bluicer Pro Bedienungsanleitung

Sage

Sage the 3X Bluicer Pro SJB815 Bedienungsanleitung

Sage

Sage SPB550BAL2EEU1 Bedienungsanleitung

Sage

Sage the Q BBL820 Bedienungsanleitung

Sage

Sage the Q SBL820 Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung

Sage the Boss To Go Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken