Sam4s SER-7000 Bedienungsanleitung
SER-7000 Series Quick Start Guide
Contents
About the SER-7000 Series 1
Product Manual CD 3
Register Controls 4
Initial Startup 6
Navigating the SER-7000 6
Initial Clear 13
Specifications 14
About the SER-7000 Series
Congratulations! You have selected a very flexible point of
sale terminal designed to provide years of reliable service.
Your SAM4s/Samsung dealer will help you configure the SER-
7000 to your specific needs.
The SER-7000 Series is offered in two different versions:
xThe SER-7000 features a flat 160-position keyboard
with 107 NLU keys. (NLUs are used to
merchandise categories/departments or for individual
menu items in a restaurant environment.) Because it offers protection from spills,
this keyboard works best in restaurants, food service shops, or convenience stores
where food is served.
xThe SER-7040 features a 90-position keyboard with traditional raised keys. In the
standard configuration, the keyboard provides 15 NLU keys – it can be expanded
to 40 NLU keys. The SER-7040 works best in retail stores, or shops where it is
not necessary to place a large number of preset item keys on the keyboard.
SER-7000 series manuals include instructions for both models. The keyboard is the only
significant difference between the two models. All other features are the same, unless
otherwise noted.
2
x
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
ATTENTION
The product that you have purchased contains a rechargeable Ni-MH battery. This battery is recyclable. At the end of its
useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system.
Check with your local solid waste officials for details concerning recycling options or proper disposal.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
x
3
Product Manual CD
The SER-7000 Product Manual CD is included with each new SER-7000 series terminal.
The CD contains the following files:
7000_operate.pdf
The SAM4s SER-7000/7040 Operation Manual contains samples of typical operation
sequences, including screen shots and print samples. Also included are default keyboard
layouts, key descriptions, report sequences and report samples.
7000_program.pdf
The SAM4s SER-7000/7040 Program Manual contains a summary and description of all
program options, both P-Mode (program mode) and S-Mode (secure mode). Typically most
programming will be designed and input by the installing dealer, based on the requirements
of the end user. The end user may perform some ongoing program maintenance, i.e. PLU
item and price programming. Managers should consult with the installing dealer to
determine authority levels for access to specific programs for routine changes.
AdbeRdr60 enf full.exe
Adobe® Reader® 6.0 is free software that lets you view and print Adobe Portable Document
format (PDF) files on a variety of hardware and operating system platforms. For
Windows95/98/ME/NT/XP, double-click the AdbeRdr60 enf full.exe file to install the
reader, or go to:
http://www.adobe.com/prodindex/acrobat/readstep.html#reader
in order to download and install Adobe Acrobat for your PC operating system.
4
x
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
Register Controls
Rear Display
You can lift the rear
display and rotate it for
optimum viewing.
Power On/Off
The power on/off toggle switch
is located on the right side at
the rear of the terminal.
Front Display
By pushing on the bottom or
top of the display, you can
move the display to a different
viewing angle.
Display Adjustments
In the Reg key lock position,
press the Page Up key
repetitively to increase contrast;
press the Page Down key
repetitively to reduce contrast.
Key Lock
Use the appropriate key(s) to
access REG, X, Z, P, C and
Void lock positions.
IRC
(Ethernet)
Optional
2nd Cash
Drawer
PS/2 Keyboard
(Programming)
RS232C
(4 Ports
Maximum)
Connection Panel
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
x
5
Initial Setup
1. Un-box and unpack the terminal. Be sure to remove tape securing the printer
compartment door and the tape securing the receipt and journal printer paper
compartments.
2. Assemble the 2-piece journal take-up spool by snapping the flat, right side of the
spool on to the paper spindle.
3. Load the receipt and journal paper using the initial paper rolls supplied:
xSqueeze the blue tab and lift the journal paper compartment access door.
xDrop the paper into the compartment with the paper spooling from the bottom of
the roll.
xClose the compartment door and press gently until you hear the snap securing the
access door shut.
xLoad the receipt paper in the same manner.
xFold the paper end of the journal paper and insert the folded end into the slot on
the journal paper spool spindle. Place the journal spool in the take-up
mechanism.
xReplace the printer compartment door. Take care to route the receipt paper
through the slot in the door.
Note: Reorder thermal paper rolls 58 mm wide (57.5 mm
ധ
0.5 mm)
ശ
80 mm
maximum diameter.
Step 2: Snap Flat Right Side of Spool
on Paper Spindle
Step 3: Squeeze the Blue Tap to Open
the Paper Compartment (Shown on
Recei
p
t
)
Journal Paper
Sl
Receipt Paper
Compartment
Journal Paper
Compartment
6
x
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
Initial Startup
1. Plug the terminal into a grounded outlet on an isolated circuit. Clean isolated
power is essential for the proper operation of sophisticated electronic equipment.
Consult your dealer to determine if additional power conditioners are required for
your installation.
2. Turn the power on. The power on/off toggle switch is located on the right side at
the rear of the terminal. The display will light and the journal printer will advance.
3. Insert an operator key into the key lock and turn to the REG position.
4. Your SAM4s dealer will perform a memory all clear before beginning to program
your SER-7000/7040. This will insure that any residual program data will be
cleared before your program is installed. Refer to “Memory All Clear” in the SER-
7000/7040 Program manual. You will need an S key to perform this secure
function.
5. The default program is installed at the completion of the Memory All Clear. Each
key will be set with the function of the default key sheet. All PLUs will operate as
zero value preset keys and all functions will operate as labeled.
6. You must sign on an employee before registrations are accepted. If the message
ENTER EMPLOYEE # displays, you can sign on a default employee by pressing
the numeric 1and then the EMP# key.
Notes:
Before using this terminal for the first time, leave it powered ON in the REG mode for
at least 24 hours. This allows the Ni-Mn battery, which maintains the terminal’s
memory while the power is OFF, to fully charge.
Should it ever become necessary to replace the battery, proper disposal of the battery is
required. Refer to your local codes for disposal requirements.
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
x
7
Navigating the SER-7000
Review the information contained in this chapter before attempting to program your SER-
7000.
Default Keyboard – SER-7000
The SER-7000 keyboard is shown below with the default legends and key assignments.
This configuration has 107 NLU key locations.
46 766656 1SBTL
32
8362617 86
%3
10696
45 756555 4CHECK
65
7352516 85
%2
10595
44 746454 7
MISC
1
98
6342415 84
%1
10494
40 706050
CANCELENTER
KEYB
LVL 1
2302011 80
TAX1
SHIFT
10090
39 695949
ERR
CORR
MDSE
RTRN
VOID
ITEM
PAGE
UP
1291910 79
PRICE
LVL 2
9989
41 716151
YES/NO
RECALL
CHECK
PAGE
DOWN
KEYB
LVL 2
3312112 81
MACRO
1
10191
42 726252
n
STORE
CHECK
op
4322213 82
MACRO
2
10292
43 736353
@/FOR MISC
2
CLEARPLU
5332314 83
MACRO
3
10393
38 685848
RECEIPT
ISSUE EMP #
TIME
CLOCK
EXEMPT
TAX
RECT
FEED 28
RCPT
ON/OFF
DETL
FEED 78
PRICE
LVL 1
9888
47 776757 0CASH
.
00
9372718 87
DONE
10797
m
8
x
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
ER-7040 Keyboard – Default 15 NLU Configuration
The SER-7040 keyboard is shown below with the default legends and key assignments.
This configuration has 15 keyboard NLU locations and can be expanded to 40 NLU
locations.
ER-7040 Keyboard – Expanded 40 NLU Configuration
2
1
3
4
5
712
611
813
914
10 15
17
16
18
19
20
22
21
23
24
25
27
26
28
29
30
32
31
33
34
35
37
36
38
39
40
SBTL
CANCEL
MISC
1
#/NS
9F/S
SUB
CURSOR
LEFT
DONE
87 2
F/S
SHIFT
PAID
RTRN
% 2
1
6
PAGE
DOWN
TAX 1
SHIFT
54 3
3
CURSOR
UP
PAGE
UP
ENTER
21 4
TIME
IN/OUT
5
VOID EMP#
MDSE
ACCT
% 1
RECT
FEED
RCPT
ISSUE
DETL
FEED
MACRO
3
MACRO
2
ERROR
CORR
0CASH
.
00
712
611
813
914
10 15
% 3
YES/NO
X/TIME
CHECK
F/S
TEND
CURSOR
RIGHT
CURSOR
DOWN CLEARPLU
SBTL
CANCEL
MISC
1
#/NS
9F/S
SUB
CURSOR
LEFT
DONE
87
F/S
SHIFT
PAID
RTRN
% 2
6
PAGE
DOWN
TAX 1
SHIFT
54
3
CURSOR
UP
PAGE
UP
ENTER
21
TIME
IN/OUT
VOID EMP#
MDSE
ACCT
% 1
RECT
FEED
RCPT
ISSUE
DETL
FEED
MACRO
3
MACRO
2
ERROR
CORR
0CASH
.
00
% 3
YES/NO
X/TIME
CHECK
F/S
TEND
CURSOR
RIGHT
CURSOR
DOWN PLU CLEAR
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
x
9
Essential Function Keys
Because the SAM4S SER-7000 keyboard is programmable, you can use the default keyboard,
you can modify it, or you can design a keyboard that fits your exact needs.
In order to program and operate the SAM4S SER-7000, you must place all of the
following keys on every keyboard:
xNumeric Keys 0-9
xCLEAR
xY/N
xENTER
xCursor Control Keys
n p m o
xPAGE UP/PAGE DOWN
xDONE
x@/FOR
xEMP#
Notes: Moving essential keys is not advised. When programming an alpha field with
the alpha overlay, the essential keys will shift back to their original position as part of
the alpha overlay.
You cannot change the assignment of an essential key (i.e. numeric key, Y/N, cursor
keys, ENTER, etc.) unless it is first located in a different position on the keyboard.
Many function keys have programming options. See "Function Key" programming in "P-
Mode Programming" for individual function key programming options.
10
x
SER-7000 Series Quick Start Guide SER-7000 Series Quick Start Guide
Control Lock
VOID
P
Z
X
REG
OFF
(
S MODE
)
VOID
OFF
REG
X
Z
P
S MODE
Use to void (correct) items outside of a sale.
The register is inoperable.
(Register) use for normal registrations.
Use to read register reports and perform other manager
functions.
Use to read register reports and reset totals to zero.
(Program) Use to program the register.
Use for tests and special settings. This position is not
marked on the control lock.
The SER-7000 includes two sets of keys that can be used to access the following control lock
positions.
Key Positions Accessible
VOID VOID, OFF, REG, X
XOFF, REG, X
ZOFF, REG, X, Z
PGM VOID, OFF, REG, X, Z, PGM
CALL POSITIONS
Andere Handbücher für SER-7000
3
Inhaltsverzeichnis
Andere Sam4s Kasse Handbücher
Sam4s
Sam4s SPS-500 Bedienungsanleitung
Sam4s
Sam4s ER-285M Bedienungsanleitung
Sam4s
Sam4s SAM300 Bedienungsanleitung
Sam4s
Sam4s ER-180U Series Bedienungsanleitung
Sam4s
Sam4s ER-230 Series Betriebsanleitung
Sam4s
Sam4s SER-7000 Bedienungsanleitung
Sam4s
Sam4s ER-600 Bedienungsanleitung
Sam4s
Sam4s ER-280 SERIES Bedienungsanleitung
Sam4s
Sam4s ER-5100? SERIES Betriebsanleitung
Sam4s
Sam4s ER-180U Series Bedienungsanleitung
Sam4s
Sam4s ER-900 Series Bedienungsanleitung
Sam4s
Sam4s ER-380M Fehlerbehebungshandbuch
Sam4s
Sam4s SER-7000 Bedienungsanleitung
Sam4s
Sam4s NR-500R Bedienungsanleitung
Sam4s
Sam4s ER-285M Betriebsanleitung
Sam4s
Sam4s ER-5200 Bedienungsanleitung
Sam4s
Sam4s ER-420M Fehlerbehebungshandbuch
Sam4s
Sam4s SPS-500 Bedienungsanleitung
Sam4s
Sam4s ER-390 SERIES Fehlerbehebungshandbuch
Sam4s
Sam4s ER-380 Fehlerbehebungshandbuch
Beliebte Kasse Handbücher anderer Marken
Sharp
Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... Bedienungsanleitung
TEC
TEC TEC MA-1060 Bedienungsanleitung
Casio
Casio PCR-408 Montageanleitung
ELCOM
ELCOM Euro-2100TE Bedienungsanleitung
American Changer
American Changer CLASSIC Series Bedienungsanleitung
Sharp
Sharp ER-2540 Bedienungsanleitung