Samsara AG45 Bedienungsanleitung
AG45 - Unpowered Asset Tracker
Install Guide
ENGLISH
AG45 Installation Guide 1
2
Peel o the sticker. To activate, use the provided pin to
press the button underneath for 1
second.
The light will turn green when the device
is activated.
1
AG45 Installation Guide 3
4
Use the provided alcohol wipe to clean
the install surface.
Place and hold the device where you
would like to mount it.
3
AG45 Installation Guide 4
Mark the location for the screws using
the holes in the product.
5
AG45 Installation Guide 5
6
Remove the tracker, and drill small
pilot holes.
Mark center
AG45 Installation Guide 6
Replace product and screw down with
the included anti-theft bit.
7
Spray painting the device to camouage
it is ne, however it’s recommended you
do not use a metallic paint which might
interfere with antenna performance.
Installation Tips
The batteries are replaceable. You can
replace the batteries using Li-SOCL2
batteries which are easily purchasable
online, we recommend SAFT brand
LS14500 batteries.
AG45 Installation Guide 7
The ideal orientation for the device is
vertical with the LED indicator on the
bottom.
AG45 Installation Guide 8
To attach the device without using
screws (for example, if you are mounting
the device on a curved surface) use the
provided VHB adhesive tape.
Installation Tips (cont’d)
Andere Samsara GPS Handbücher
