Samson EXPEDITION XP150 Bedienungsanleitung

Owner’s Manual

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

Thank you for purchasing the Expedition XP150 Portable PA System from Samson!

The XP150 features a compact, 5-channel mixer with 150 watts of onboard power and

dual 2-way speakers, making it an ideal solution for a variety of small- to medium-sized

PA applications. The XP150 is also extremely portable, thanks to its lightweight and

unique “Slide and Lock” design.

The 5-channel mixer can be removed from the speaker for tabletop use. It features

three inputs for connecting microphones, plus one channel for connecting a stereo

signal from an MP3 player, or other electronic device. There’s also a built-in digital ef-

fects processor to add reverb to your voice or instrument. The mixer provides a robust

output, with 150 watts total power from the lightweight, Class D amplier section.

The XP150 employs a matched speaker system with dual 2-way enclosures that have

proprietary 6-inch woofers and 1-inch high frequency drivers. To help project sound

to a larger audience, the XP150 speakers can be mounted on standard speaker stands,

thanks to the integral pole mount receptacles. The XP150 is constructed using durable

ABS high impact plastic, making it super road tough and, at the same time, light-

weight.

In this manual, you’ll nd a detailed description of the features of the XP150 PA system,

as well as a description of its front and rear panels, step-by-step instructions for its

setup and use, and full specications. You’ll also nd a warranty card enclosed—please

don’t forget to ll it out and mail it in so that you can receive online technical support,

and so we can send you updated information about these and other Samson products

in the future. Also, be sure to check out our website (www.samsontech.com) for com-

plete information about our full product line.

With proper care and adequate air circulation, your XP150 will operate trouble free

for many years. We recommend you record your serial number in the space provided

below for future reference.

Serial number:_______________________________

Date of purchase:____________________________

Should your unit ever require servicing, a Return Authorization (RA) number must

be obtained before shipping your unit to Samson. Without this number, the unit will

not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA

number prior to shipping your unit. Please retain the original packing materials and, if

possible, return the unit in the original carton and packing materials. If you purchased

your Samson product outside the United States, please contact your local distributor

for warranty information and service.

Introduction

Owner's Manual 5

Expedition XP150

Features

• The XP150 is a compact PA system with dual 2-way speakers, onboard mixer, and

150 watt power amplier.

• The XP150 is the ultimate in portability. The lightweight, clever design allows you

to slide and lock the two speakers together to carry all components together in a

single, easy to move case. The mixer is stored in one of the speaker cabinets. The

second cabinet has a compartment for storing the speaker cables, microphones,

and other accessories.

• The speakers are 2-way vented enclosures with 6-inch woofers. Each is compli-

mented by a 1-inch high frequency driver, and set in a custom horn with a 60 x 90

degree coverage pattern producing a clean, clear sound.

• The XP150 speaker cabinets feature a tilt back monitor position for use without

speaker stands or as a performance monitor.

• The internal 2 x 75 watt lightweight Class D power amplier produces a powerful

stereo sound.

• The XP150’s mixer can be removed from the speaker for tabletop use.

• The 5-channel mixer features three Mic/Line inputs allowing you to connect micro-

phones or line signals. In addition, one stereo input channel allows you to connect

line level signals from keyboards, drum machines and MP3 or CD players. You can

engage the Phantom Power switch if you are using condenser microphones.

• On each of the mixer’s channel inputs there is a Bass and Treble control allowing

you to equalize the tone of the individual inputs.

• To create a lush sound on any of the microphone channels, you can use the internal

eects processor to add Digital Reverb.

6Expedition XP150

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

Setting Up the XP150

1. Unpack all the system components from the shipping carton and save all packing

materials in the event your unit ever needs to be returned for service.

2. Remove the mixer by turning the quarter turn screw counterclockwise towards

the RELEASE position.

LOCK

RELEASE

3. Carefully hold the mixer to remove it from the speaker.

4. Remove the accessory compartment cover by turning the quarter turn screw

counterclockwise towards the RELEASE position, and remove the included

speaker cables.

Owner's Manual 7

Expedition XP150

5. Replace the accessory panel by aligning the bottom of the panel with the slots.

Make sure the quarter turn screw is in the RELEASE position; then close the panel

and turn the quarter turn screw clockwise to LOCK.

6. Position the speakers on the oor or on stands.

7. Using one of the included speaker cables,

connect the mixer’s LEFT SPEAKER OUT to the

left speaker’s input connector. Next, use the

second included speaker cable to connect

the RIGHT SPEAKER OUT to the right speaker’s

input connector.

Setting Up the XP150

8Expedition XP150

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

XP150 Quick Start

1. Be sure that the XP150’s POWER switch is set to the OFF position.

2. If the speakers are not connected, connect the speaker wires as described in the

previous section.

3. Turn each of the channel volume (VOL) and MASTER volume controls fully coun-

terclockwise, to the“0”position.

4. Next, connect one side of the included power cable to the XP150 mixer’s power

inlet and the other to a grounded AC power outlet.

5. Connect your microphones using standard XLR cables, instruments using ¼”

phone cables, and MP3 player using 3.5mm cable, into the appropriate jacks on

the mixer.

Microphone

Electric Acoustic

Guitar

Keyboard

6. Switch on all equipment connected to the XP150, then switch the XP150’s POWER

switch to the ON position.

7. Turn the MASTER level control up halfway, to the “5” position.

Owner's Manual 9

Expedition XP150

XP150 Quick Start

8. Start talking or playing into channel 1 while slowly adjusting the VOL control until

you have reached the desired level. Do the same for each channel you are using.

9. If you notice that the POWER/PEAK indicator is lighting constantly, turn the

MASTER volume down so that the indicator only lights occasionally.

10. To add depth to the mix or smooth out the vocals, you can apply reverb to chan-

nel 1–3. To do this, press the REV button on the channel(s) to which you would like

to add the eect.

11. Slowly turn up the REVERB knob until the desired sound is reached.

12. To alter the tonal characteristic of the signal, you can adjust the LF

(bass) and HF (treble) controls. If you nd the audio too muddy,

you may want to reduce the LF control. If you nd that the audio

sounds dull, you can increase the HF control. There is no right or

wrong way to EQ a sound. You should listen to how the mix sounds

in the room and ne-tune to your liking.

10 Expedition XP150

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

Conguring the XP150 for Transport

You can easily carry your sound system using the XP150’s “Slide and Lock” feature. The

“Slide and Lock” speaker enclosures allow you to connect both speakers together into

a single, easy to carry unit. Follow these steps to congure the XP150 for easy trans-

port.

3. Slide the second speaker into the

speaker on the oor making certain

that the two speakers stay parallel to

each other.

1. Place one speaker on the oor and

set it on its side.

Speaker cabinets must be reversed with

respect to top and bottom.

2. Position the second speaker above

the rst speaker and line up the “Slide

and Lock” tracks and grooves so that

they are parallel to the speaker on

the oor.

4. You will feel a slight click when the

two speakers are in place.

Owner's Manual 11

Expedition XP150

XP150 Mixer Layout

1 3 4 10 16

1. XLR Mic Input Connectors (channels 1-3) – Use these XLR jacks to connect low

impedance microphones to the XP150’s built-in mic preamps.

2. ¼-inch Line Input Connectors (channels 1-3) – Use these ¼” jacks to connect

instrument or audio sources with line level signals to the XP150. You can connect

the outputs from acoustic guitar pickups, keyboards, drum machines, CD/MP3

players and other units with line level outputs here.

3. Stereo ¼-inch Input Connectors (channels 4/5) – For stereo devices, use the

channel 4/5 L and R inputs to connect to the left and right channel outputs of the

device. Use these inputs to connect high impedance microphones, synthesizers,

drum machines, MP3, CD, tape players or any other line level device.

4. Stereo 3.5mm Input Connector (channels 4/5) – Use this input to connect a

stereo line level device, such as an an MP3, CD, or tape player.

5. High Frequency (HF) – The HF knob controls the amount of treble applied to

each channel. The channel’s HIGH frequency response is at when the knob is

in the “0” position. Rotating the knob to the right will boost the channel’s high

frequency response above 10 kHz by 15 dB, and rotating it towards the left will cut

the high frequency response by 15 dB.

6. Low Frequency (LF) – The LF knob controls the amount of bass applied to each

channel. The channel’s LOW frequency response is at when the knob is in the “0”

position. Rotating the knob to the right will boost the channel’s low frequency

response below 100 Hz by 15 dB, and rotating it towards the left will cut the low

frequency response by 15 dB.

12 Expedition XP150

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

XP150 Mixer Layout

7. REVERB Switch – Use the REVERB switch to add an eect to a Mic or Line input on

any of the inputs 1–3. The REVERB LED indicator lights GREEN when the REVERB is

ON.

8. REVERB Indicator –The REVERB LED will illuminate when the REVERB switch is

pressed down, indicating the channel is set to add reverb (see #7 above).

9. VOLUME Control Knob – This knob sets the overall level for each channel’s Mic or

Line input. NOTE: To reduce noise, set the VOLUME controls on any unused chan-

nels to the minimum setting.

10. SPEAKER OUT Jacks – The XP150 has two ¼-inch phone connectors, which are

powered outputs used to connect your left and right speakers. Use the included

speaker cables to connect the speakers.

CAUTION: The total impedance load for each side of the amplier must not be less

than 8 Ohms. Do not connect additional speakers to the XP150 mixer.

11. SPEECH/MUSIC Switch – The SPEECH/MUSIC switch is used to change the overall

frequency response, or tone contour, for the XP150 sound system. If your ap-

plication is mainly for music, press the switch down to select the MUSIC response

curve. If your application is mainly for speech, leave the switch up to select the

SPEECH response curve.

12. REVERB Control Knob – The REVERB control knob is used to adjust the total

amount of reverb added to all channels with their REVERB switch (see #7 above)

pressed down.

13. MASTER Volume Knob – The MASTER volume knob controls the overall output

level. Signals from all ve channels are routed here just before being routed to the

built-in power ampliers and Left and Right output jacks (see #10 above).

14. POWER Switch – Use the POWER switch to turn power to the XP150 on or o.

15. Power/Peak Indicator – This LED will illuminate GREEN when the MAIN power

switch is turned on, and light RED when the when the amp is near the clipping

point. If the Peak indicator lights frequently, turn down the MASTER volume con-

trol or turn down the input channel VOL controls, until the indicator does not light

anymore, or lights only occasionally with signal peaks.

16. IEC Inlet – Connect the supplied heavy-gauge 3-pin “IEC” power cable here.

17. Mixer Lock – Turn this quarter turn lock counterclockwise, to the RELEASE poisi-

tion, to remove the mixer from the rear of the speaker cabinet. When transporting

the XP150, make sure the lock is in the LOCK position.

Owner's Manual 13

Expedition XP150

Andere Handbücher für EXPEDITION XP150

Inhaltsverzeichnis

Andere Samson Sprecher Handbücher

Samson

Samson Expedition Escape Bedienungsanleitung

Samson

Samson Resound RS10 Bedienungsanleitung

Samson

Samson AURO D415 Bedienungsanleitung

Samson

Samson Resolv 65 Bedienungsanleitung

Samson

Samson Expedition XP106 Bedienungsanleitung

Samson

Samson EXPEDITION XP510 Bedienungsanleitung

Samson

Samson Resound RS12M Bedienungsanleitung

Samson

Samson Resolv 50a Bedienungsanleitung

Samson

Samson RSX110 Bedienungsanleitung

Samson

Samson EXPEDITION XP312w Bedienungsanleitung

Samson

Samson EXPEDITION XP40i Bedienungsanleitung

Samson

Samson Resolv 50a Bedienungsanleitung

Samson

Samson 215XL Bedienungsanleitung

Samson

Samson Expedition XP300 Bedienungsanleitung

Samson

Samson MediaOne 3a Bedienungsanleitung

Samson

Samson Resolv 65a RESOLV65A RESOLV65A Bedienungsanleitung

Samson

Samson Expeditionn XP150 Bedienungsanleitung

Samson

Samson dB300a Bedienungsanleitung

Samson

Samson Auro X12D Bedienungsanleitung

Samson

Samson RS Series Bedienungsanleitung

Samson

Samson DMS80 Bedienungsanleitung

Samson

Samson Auro X12D Bedienungsanleitung

Samson

Samson Resolv A6 Bedienungsanleitung

Samson

Samson Rubicon R8a Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung