Samsung SADT-104WM Bedienungsanleitung

SADT - 104WM

Wall Mount Adaptor

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please

www.samsung.com/global/register

SADT-104WM_ENG.indd 1 2008-01-24 오전 10:24:02

ENG

SADT-104WM_1

Overview

The WALL MOUNT ADAPTOR is used to install the SMARTDOME

CAMERA (SCC-C6433/C6435) in an indoor wall.

Notice

• Make sure that you must select an installation spot to endure the total weight of "Wall

Mount Adapter", "Smart Dome Camera".

• This product is designed to use with anchor bolts and anchor nuts (M10).

• If installing in a concrete wall, use a M10 anchor bolt (nut) with ﬂat washer and spring

washer.

• Each installed anchor bolt should endure 700kg of pulling force.

• Wall Mount Adapter can be installed directly in the wall, and also attached to CORNER

MOUNT ADAPTOR(SADT-110CM), or POLE MOUNT ADAPTOR(SADT-100PM)

Installation

1. Select an installation spot which can endure more than 4 times of the product weight.

2. Refer to the user guide of the SMARTDOME CAMERA, prepare the outdoor power cable,

BNC cable, communication cable to connect the Camera.

SADT-104WM_ENG.indd 1 2008-01-24 오전 10:24:03

2_SADT-104WM

3. If you install the Wall Mount Adaptor in a wall, place the template on the wall and drill 4

holes for the anchor bolts (M10) and nuts (M10) before inserting them.

If you install it in a corner of the wall, use the Corner Mount Adaptor (SADT-110CM). If

installing on the pole of the wall, use the Pole Mount Adaptor (SADT-100PM).

4. Prepare the Camera Adaptor for the applicable camera.

Remove the Bracket Sealing from the Camera Adaptor.

TEMPLATE

The positions for

installing a ANCHOR BOLT

80 mm

150 mm

BRACKET CEILING

CAMERA ADAPTOR

SADT-104WM_ENG.indd 2 2008-01-24 오전 10:24:03

ENG

SADT-104WM_3

5. Remove the Connectors at the end of the Camera Adaptor.

In the next step, peel off the coating of the cable and connect it to the external cable

using soldering. (See the wiring diagram of the installation guide for the Camera to

connect the cables.)

Lastly, use an insulation tape to wrap up the soldering portion of two cables.

Repeat the above steps to connect all of the 4 Connectors to the appropriate external

cables.

CAMERA ADAPTOR CAMERA ADAPTOR

CABLE

CONNECTOR

EXTERNAL CABLE

BNC JACK SOLDERING

CONNECTOR

CONNECTOR BNC JACK

EXTERNAL CABLE

SADT-104WM_ENG.indd 3 2008-01-24 오전 10:24:04

4_SADT-104WM

6. Prepare the Camera Adaptor for the applicable camera. Refer to the installation guide for

the applicable camera and conﬁgure the initial settings of the Camera Adaptor.

(For more information, see the installation guide for the Camera)

Insert the cable of the Camera Adaptor into the Wall Mount Adaptor before pulling it out

throught the hole of the Cover Fixing Part.

7. Insert the 4 screws on the Wall Mount Adaptor into the corresponding screw holes on the

Camera Adaptor and ﬁx them so that the Camera Adaptor is secured to the Wall Mount

Adaptor.

Ensure that the part “A” of the Camera Adaptor faces the arrow direction in the ﬁgure

during the ﬁxation.

WALL MOUNT ADAPTOR

the place for joining a cover

CAMERA ADAPTOR

WALL MOUNT ADAPTOR

SCREW

The place for

joining a screw

CAMERA ADAPTOR

WALL MOUNT ADAPTOR

"A" CAMERA ADAPTOR

SCREW

"A"

SADT-104WM_ENG.indd 4 2008-01-24 오전 10:24:05

ENG

SADT-104WM_5

8. Pull out cables such as external power cable, BNC cable and communications cable

through the rear of the Wall Mount Adaptor, which are necessary for connecting the

camera.

It is recommended to keep the cables about 100mm longer than the cover ﬁxing part.

9. Use the anchor bolts and nuts to secure the Wall Mount Adaptor to the wall.

100mm

WALL MOUNT ADAPTOR

the place for joining a cover

WALL MOUNT ADAPTOR

CAMERA ADAPTOR

ANCHOR BOLT

SADT-104WM_ENG.indd 5 2008-01-24 오전 10:24:07

6_SADT-104WM

10. Connect the cables of the Camera Adaptor with the outward cables, which then you

push in through the Cover Fixing Part to the Wall Mount Adaptor.



Insert one piece of the two-strand cable into an empty area of the Wall Mount

Adaptor as in the ﬁgure below and push the other one into the Wall Mount Adaptor.

CAUTION

When you insert the cables into the Cover Fixing Part so that the insulation of the

cable junction is not peeled off or torn.

11. As in the bottom-left ﬁgure, insert the rib of the cover into the Cover Fixing Part. Then,

push the Sanp-Fit of the cover into the Cover Fixing Part so that the cover is fastened

with the Wall Mount Adaptor.

WALL MOUNT ADAPTOR WALL MOUNT ADAPTOR

< Insert one piece of the two-stranded cable > < Insert the other piece of the two-stranded cable >

the place for joining a cover

WALL MOUNT ADAPTOR WALL MOUNT ADAPTOR

the place for joining a cover

CAMERA ADAPTOR CAMERA ADAPTOR

COVER

RIB

SNAP-FIT

SADT-104WM_ENG.indd 6 2008-01-24 오전 10:24:08

ENG

SADT-104WM_7

12. Prepare the Camera Body.

Put up the Safety Wire, attached to the camera, on the Safety Hook.

CAUTION

To avoid accidental fall and consequent damage to the camera during installation or

detachment, make sure the Safety Wire is secured to the hook.

CAMERA ADAPTOR

WALL MOUNT ADAPTOR

SAFETY HANGER

SAFETY WIRE SAFETY WIRE

CAMERA

SADT-104WM_ENG.indd 7 2008-01-24 오전 10:24:10

8_SADT-104WM

13. Align the Guide 1 of the Camera with the Guide 2 of the Camera Adaptor and insert the

3 Guides of the Camera into the corresponding Guide Holes of the Camera Adaptor.

Then, turn the camera clockwise by 10 degrees.

Make sure that the part "A" is moved from position 1 to 2.

WALL MOUNT ADAPTOR

CAMERA ADAPTOR CAMERA ADAPTOR

GUIDE HOLE

GUIDE

CAMERA

GUIDE 2 GUIDE 3

Align!

GUIDE 1

SCREW

CAMERA

CAMERA ADAPTOR

GUIDE HOLE

GUIDE

CAMERA

WALL MOUNT ADAPTOR

CAMERA

"A"

1 2

SADT-104WM_ENG.indd 8 2008-01-24 오전 10:24:11

ENG

SADT-104WM_9

14. Use the screws, attached to the Camera, to ﬁrmly ﬁx the Camera body with the

Camera Adaptor.

(Once you removed the camera from the Camera Adaptor, loosen the screw, turn the

camera counterclockwise by about 10 degrees, and then pull it down.)

CAUTION

If you do not ﬁx the screws, CAMERA BODY could be separated from the CAMERA

ADAPTER due to the shake.

To avoid safety accident and camera damage, make sure to ﬁx the screws.

WALL MOUNT ADAPTOR

CAMERA

SCREW

SADT-104WM_ENG.indd 9 2008-01-24 오전 10:24:12

Inhaltsverzeichnis

Andere Samsung Adapter Handbücher

Samsung

Samsung HD39J1230GW Bedienungsanleitung

Samsung

Samsung EE-PW700 Bedienungsanleitung

Samsung

Samsung AllShare Cast Dongle Bedienungsanleitung

Samsung

Samsung MIM-H03U Leitfaden

Samsung

Samsung HD2018GH Bedienungsanleitung

Samsung

Samsung MagicLAN SWL-2100N Bedienungsanleitung

Samsung

Samsung SADT-100HM Bedienungsanleitung

Samsung

Samsung EE-P3200 Bedienungsanleitung

Samsung

Samsung Level Link Bedienungsanleitung

Samsung

Samsung MIM-H03UN Leitfaden

Samsung

Samsung GALAXY S3 Bedienungsanleitung

Samsung

Samsung SBP-300WM1 Bedienungsanleitung

Samsung

Samsung RIF-BT10 Bedienungsanleitung

Samsung

Samsung KINO KIT VG-SWD1000 Bedienungsanleitung

Samsung

Samsung Sadt-110cm Bedienungsanleitung

Samsung

Samsung EE-P5400 Bedienungsanleitung

Samsung

Samsung SEK-1000 Bedienungsanleitung

Samsung

Samsung MagicLAN SWL-2300U Bedienungsanleitung

Samsung

Samsung LinkStick WIS12ABGNX Bedienungsanleitung

Samsung

Samsung KINO KIT VG-SWD1000 Bedienungsanleitung

Samsung

Samsung SADT-103WM Bedienungsanleitung

Samsung

Samsung LinkStick WIS12ABGNX Bedienungsanleitung

Samsung

Samsung MagicLAN SWL-2000N Bedienungsanleitung

Samsung

Samsung EE-P5000BBEGWW Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung