Samsung SCX-1000I Bedienungsanleitung

SERVICE

Mult-function Printer

SCX-1000I

SCX-1000SI

Manual

Mult-function Printer

CONTENTS

1. Precautions

2. Specifications

3. Disassembly and Reassembly

4. Maintenance & Troubleshooting

5. Exploded Views and Parts List

6. Electrical Parts List

7. Block Diagrams

8. PCB Diagrams

9. Schematic Diagrams

ELECTRONICS

Printed in Korea.

VERSION NO. : 1.00 P/N.: JB-0006A

1. Precautions

Follow these safety, ESD, and servicing precautions to prevent personal injury and equipment damage.

1-1 Safety Precautions

1. Be sure that all built-in protective devices are in

place. Restore any missing protective shields.

2. Make sure there are no cabinet openings through

which people- particularly children- might insert

fingers or objects and contact dangerous voltages.

3. When re-installing chassis and assemblies, be

sure to restore all protective devices, including

control knobs and compartment covers.

4. Design Alteration Warning:

Never alter or add to the mechanical or electrical

design of this equipment, such as auxiliary

connectors, etc. Such alterations and

modifications will void the manufacturer’s

warranty.

5. Components, parts, and wiring that appear to

have overheated or are otherwise damaged

should be replaced with parts which meet the

original specifications. Always determine the

cause of damage or overheating, and correct any

potential hazards.

6. Observe the original lead dress, especially near

sharp edges, AC, and high voltage power

supplies. Always inspect for pinched, out-of-

place, or frayed wiring. Do not change the

spacing between components and the printed

circuit board.

7. Product Safety Notice:

Some electrical and mechanical parts have special

safety-related characteristics which might not be

obvious from visual inspection. These safety

features and the protection they provide could be

lost if a replacement component differs from the

original. This holds true, even though the

replacement may be rated for higher voltage,

wattage, etc.

Components critical for safety are indicated in

the parts list with symbols . Use only

replacement components that have the same

ratings, especially for flame resistance and

dielectric specifications. A replacement part that

does not have the same safety characteristics as

the original may create shock, fire, or other safety

hazards.

Samsung Electronics 1-1

1-2 Samsung Electronics

Precautions

1-2 ESD Precautions

Certain semiconductor devices can be easily

damaged by static electricity. Such components are

commonly called “Electrostatically Sensitive (ES)

Devices”, or ESDs. Examples of typical ESDs are:

integrated circuits, some field effect transistors, and

semiconductor “chip” components.

The techniques outlined below should be followed

to help reduce the incidence of component damage

caused by static electricity.

CAUTION: Be sure no power is applied to the

chassis or circuit, and observe all other safety

precautions.

1. Immediately before handling a semiconductor

component or semiconductor-equipped assembly,

drain off any electrostatic charge on your body

by touching a known earth ground. Alternatively,

employ a commercially available wrist strap

device, which should be removed for your personal

safety reasons prior to applying power to the unit

under test.

2. After removing an electrical assembly equipped

with ESDs, place the assembly on a conductive

surface, such as aluminum or copper foil, or

conductive foam, to prevent electrostatic charge

buildup in the vicinity of the assembly.

3. Use only a grounded tip soldering iron to solder

or desolder ESDs.

4. Use only an “anti-static” solder removal device.

Some solder removal devices not classified as

“anti-static” can generate electrical charges

sufficient to damage ESDs.

5. Do not use Freon-propelled chemicals. When

sprayed, these can generate electrical charges

sufficient to damage ESDs.

6. Do not remove a replacement ESD from its

protective packaging until immediately before

installing it. Most replacement ESDs are

packaged with all leads shorted together by

conductive foam, aluminum foil, or a comparable

conductive material.

7. Immediately before removing the protective

shorting material from the leads of a replacement

ESD, touch the protective material to the chassis

or circuit assembly into which the device will be

installed.

8. Maintain continuous electrical contact between

the ESD and the assembly into which it will be

installed, until completely plugged or soldered

into the circuit.

9. Minimize bodily motions when handling

unpackaged replacement ESDs. Normal motions,

such as the brushing together of clothing fabric

and lifting one’s foot from a carpeted floor, can

generate static electricity sufficient to damage an

ESD.

2. Specification

2-1 Copier

Scanner Type Flat-bed without ADF (Automatic Document Feeder)

Maximum Original Size A4/Letter

Maximum Paper Size A4/Letter/Legal

Maximum Scan Width 216 mm

Optical Resolution (HxV) 300 x 600 dpi

Copy Quality Fast, Normal, Best

Mono Copy Speed Maximum: 4cpm.

Color Copy Speed Maximum: 1.5cpm.

Maximum Print-edge Margin Top: 3.4mm, Bottom: 19.5mm, Each Side: 6.5mm

Multicopy 99 pages

Zoom Rate 25 % ~ 400 % (1 % Step)

Contrast Control 3 Steps

2-1Samsung Electronics

2-2 Printer

Technology Color Thermal Inkjet

Engine Type 2-Pen (K and CMY)

Operating System Windows 95/98/NT

Interface IEEE 1284 (ECP Support), USB (without HUB Mode)

Emulation HBP

Print Speed (2) Mono 9ppm Draft / 7ppm Normal

Color 4.5ppm Draft / 2ppm Normal

Print Resolution (H x V) Draft 300 x 600 dpi

Normal 600 x 600 dpi

Best 1200 x 1200 dpi (Addressable)

Maximum Paper Size A4, Letter, Legal

Effective Printing Width 8.0” (203 ± 1mm)

Paper Feeding Capacity Maximum150 Sheets

Output Tray Capacity Maximum 50 sheets

Maximum Cable Length 6 ft(1.8m) of standarol IEEE 1284 (3)

Note:

(2) Speed claims based on the test files: spdtst.sam(mono), spdtstc2.sam(color)/Letter size

(3) Non-standard cable can cause misoperations.

2-2 Samsung Electronics

Specification

2-3 Scanner

Operation System Windows 95/98/NT

Interface IEEE 1284 (ECP Support), USB (without HUB Mode)

Compatibility TWAIN

Device Platen Color CIS (Contact Image Sensor)

Scan Width Max.: 8.5” (216 mm), Effective: 8.2” (210 mm)

Color Depth 30 bit

Optical Resolution (H x V) 300 x 600 dpi

Interpolation Resolution Max. 4800 dpi

Pre-scan Mode Yes, 75 dpi

2-4 Ink-head

Mono Cartridge Color Cartridge

Head Babbage 208 nozzles Birch 192 nozzles

Ink type Pigment Dye

Ink Color Black Color (CMY)

Ink Yield High yield : 1075 pages 200 pages

2-5 Power Supply

Rated AC Input Voltage 110 ~ 240 VAC (Universal)

Rated Input Frequency 50 ~ 60 Hz

Minimum/Maximum AC Input 90 VAC/265 VAC

Maximum Input Current 3A

DC Channels (4) +5V +5%, +12V +2%, +30V +5%

Samsung Electronics 2-3

Specification

2-6 Dimension

Machine Size (W x D x H) 445 x 369x 258mm

Machine Weight About 7.8 Kg (Machine itself)

2-7 Packaging

Power Cord 1EA

IEEE 1284 Cable 1EA

USB Cable No

CD-ROM 2EA

Ink Cartridge Mono 1EA, Color 1EA

Manual 2vol.

2-8 Environmental Condition

Absolute Storage Temperature(5) -25oC ~ 60oC

Absolute Storage Humidity(5) 10% RH ~ 90% RH

Recommended Temperature 16oC ~ 32oC

Operating Condition Humidity 40% RH ~ 70% RH

2-9 Machine Life

Product Life in Time 3 Years

Life Time in Pages 20,000 Printing Pages

Maximum Monthly Duty Cycle 1,200 Printing Pages except Ink-head

Note:

(5) Packing Condition

2-4 Samsung Electronics

Specification

MEMO

3. Disassembly and Reassembly

3-1 General Precautions on Disassembly

When you disassemble and reassemble components, you must use extreme caution. The close proximity of

cables to moving parts makes proper routing a must. If components are removed or replaced, any cables

disturbed by the procedure must be replaced as close as possible to their original positions. Before removing

any component from the machine, note the cable routing that will be affected.

Whenever servicing the machine, you must perform as follows:

1. Check to verify that documents are not stored in memory.

2. Unplug the power cord.

3. Use a flat and clean surface.

4. Replace only with authorized components.

5. Do not force to remove or planten plastic-material components.

6. Make sure all components are in their proper position.

1. Remove the guide outer. 2. Remove two screws securing the rear cover.

Separate the rear cover from the main frame.

Samsung Electronics 3-1

3-2 Rear Cover

3-3 Scanner Unit Assembly

3-2 Samsung Electronics

Disassembly and Reassembly

1. Raise the scanner support to hold up the scanner

unit and remove the stopper holding the scanner

unit.

2. Remove two screws and take out the PCB cover. 4. Unplug the harness and one connector from

the main PBA.

3. Unlatch the harness cover by pushing on the

bottom of the tabs upward, then remove the

cover.

Unlatch the cover.

You should connect or remove the FPC cable

vertically to avoid the FPC cable pin damage.

FPC cable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Multifunktionsdrucker Handbücher

Samsung

Samsung SCX-4729FW Bedienungsanleitung

Samsung

Samsung SCX-4321 Bedienungsanleitung

Samsung

Samsung SCX-6545N Series Bedienungsanleitung

Samsung

Samsung M387 Bedienungsanleitung

Samsung

Samsung ML-551 Series Bedienungsanleitung

Samsung

Samsung Office Master SCX-5312F Bedienungsanleitung

Samsung

Samsung SCX-5935NX Series Benutzerhandbuch

Samsung

Samsung CLX-6200ND Bedienungsanleitung

Samsung

Samsung CLX-3175FW - Color Laser Multifunction... Bedienungsanleitung

Samsung

Samsung ProXpress M337x Bedienungsanleitung

Samsung

Samsung MultiXpress C9201NA Bedienungsanleitung

Samsung

Samsung SCX-4500 Series Bedienungsanleitung

Samsung

Samsung SL-C1860FW Bedienungsanleitung

Samsung

Samsung Lazett Combo SCX-4216F Bedienungsanleitung

Samsung

Samsung SCX-4300 - SCX 4300 B/W Laser Bedienungsanleitung

Samsung

Samsung M267x series Bedienungsanleitung

Samsung

Samsung CLX-6260FD Bedienungsanleitung

Samsung

Samsung SCX-5635FN - Mono Laser P/s/c/f USB Enet 1200X1200 128MB... Bedienungsanleitung

Samsung

Samsung CLX 3160FN - Color Laser - All-in-One Bedienungsanleitung

Samsung

Samsung MSYS 5200 Bedienungsanleitung

Samsung

Samsung CLX-4195N Bedienungsanleitung

Samsung

Samsung SF-565PR Bedienungsanleitung

Samsung

Samsung MultiXpress M537x series Bedienungsanleitung

Samsung

Samsung MFP SECURITY Kurzanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung