Samsung SEW3043WN Bedienungsanleitung

· Viewing Mode Display

Indicator Description

How to use the indicator

a b c d ef g h i j

aSignal Indicator

The signal indicator shows the strength of the signal being received from the

camera.

The number of bars in the signal indicator shows the strength of the signal –

One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.

bDigital Clock

Displays the time that is set on the monitor. It only provides AM / PM time

format and no 24hour format.

cCamera Number

Indicates which camera is being displayed on the current screen. When scan mode

is selected, this icon will flash.

dSound level Indicator

Indicate the sound level of the Active Camera.

ex1/x1.5/x2 Zoom mode

Indicates that current screen is Zoomed in. Press [

] icon on the monitor to

zoom back out.

fNight Vision Indicator

Indicates camera night vision mode is turned on.

The screen will appear in Black/White in this mode.

gVOX On

Indicates you select Low Sound level detection or High Sound level detection in

VOX menu.

hMonitor Speaker Mute

Indicates the monitor speaker is muted. Once the monitor’s speaker is muted,

no sound from the camera is produced.

iBattery Capacity Level

Indicates remaining battery charge. Indicated in 4 levels, and one discharge

warning.

Charging

Indicates the battery is charging by DC input power. If battery nearly empty,

it will flash to alert user to charge up the unit.

Two-way talk

Press the [ ] icon while talking.

No Signal Warnings

The "Out of Range" message means the monitor cannot access the camera.

Please reposition the camera, or check the camera power.

VIeWInG Mode dIsplay

English ·

03 Viewing Mode Display

Menu Operation

How to use the function tools

Press the screen of the monitor to display the menu screen.

b dc e

aNavigation Controls

Using the navigation [ ] icons, you can control camera angle.

bMenu Setting

Menu setting mode is including monitor and camera settings.

cMonitor Volume

Using the [ / ] icons, you can adjust the monitor volume.

dZoom IN / Zoom Out

When x1/x1.5 Zoom mode, the magnifier icon is [

] inside, means press this icon

will zoom in video image. When x2 Zoom mode, the magnifier icon is [

] inside,

means press this icon will zoom out video image.

eLullaby

Press the icon to turn on and turn off lullabies.

How to use the setup icon

설정을

완료한

후

[ ]

아이콘을

눌러

저장하세요

Live

화면으로

돌아오려면

[ ]

아이콘을

누르세요

Settings

e f g

a b c d

Settings

aBrightness

Adjusts the brightness of the image shown. If you are using multiple camera,

you can adjust the brightness of each individual camera.

Settings

bSet Camera Speaker Volume

Adjust the volume of the speaker on the camera in this menu. The volume can

be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the

quietest.

Settings

cTime Setting

Set the time shown on the monitor. Use the [ ] or [ ] icon to change the

numbers in the selected field.

Settings

dFeed Timer

Set the feed time shown on the monitor. Use the [ ] or [ ] icon to change

the numbers in the selected field.

· Viewing Mode Display

Settings

eCamera VOX Sensitivity

If not in “VOX” mode, [ ] icon is not displayed.

In VOX mode, you can select “Low Sound Level Detection” or “High Sound

Level Detection”. If set to “Low Sound Level Detection”, monitor can be

triggered by lower audio level than “High Sound Level Detection” setting.

• Audio Only Mode :Video will turn on 30 seconds and then video will turn off,

monitor speaker is still playing camera background sound.

• Continuous Video and Audio Mode : Video will not turn off and always

streaming video all the time.

When you press Power Key, Monitor will be automatically switched to Low

Sound Level Detection mode.

• Low Sound Level Detection : Small baby cry level can trigger video to turn on

for 30 seconds, then back to stand-by.

• High Sound Level Detection : Loud baby cry level can trigger video to turn on

for 10 minutes, then back to stand-by.

Settings

fPairing

You can register a wireless camera with the monitor using the registration menu

where you can view the video of the selected wireless camera.

Settings

gReset

Choose <YES> to reset the monitor to factory defaults.

All settings except for time information will be reset to the factory defaults.

English ·

04 Overview

Getting to know your Monitoring system

Wireless Monitor

After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.

Front Controls

oVerVIeW

5” LCD Screen

Displays video from the camera.

Power LED

When the monitor is being recharged or monitor has low

electricity, red light flashes.

When the monitor is working, the LED becomes solid

red light.

Microphone

Transmits audio to the camera when [

] icon is

pressed down and held like a walkie talkie.

Monitor Antenna

Receives and sends signals from or to the camera.

Navigation Controls

Viewing Mode: The following controls are used while watching live video from the camera:

• Press the [

] or [

] icon to adjust camera’s framing upwards or downwards.

• Press the [

] or [

] icon to adjust camera’s framing to the left or right.

• Press [ ] icon to zoom in/out the screen.

While in zooming, use [

] icon to move the screen around.

Menu Mode: Press the [ ] icon to confirm the menu selection.

· Overview

Back Controls

`You must have more than one camera configured on the system when using the functions that requires more than one camera.

Power On/Off

Turn on/off the wireless monitor.

Speaker

Produces the sound transmitted from the camera(s).

DC 5V Power Input

Connect the included AC power adapter to power and/or

charge the monitor battery. (when the monitor is not placed

in the optional Charge cradle).

Belt Clip

When you carry the monitor, use the belt hanger to hold the

monitor onto your belt.

Kick Stand

Use to hold the monitor onto a table.

English ·

04 Overview

Wireless Camera

Front & Back Controls

`Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.

Side & Bottom Controls

PAIR Button

Press this button to pair with a monitor.

Power Slide Switch

Turns the camera ON or OFF.

Night vision sensor

Detects light levels where the camera is placed.

IR LEDs

Infrared LED’s provide viewing in no / low light

conditions.

Microphone

Receives sounds for the area near the camera, and

transmits sound from the camera to the monitor.

Speaker

Produces the sound transmitted from the monitor.

Night Light Button

Turns Night Light ON or OFF.

When the camera is powered on, Night Light would be

automatically turned on.

Camera Antenna

Sends & receives signals to or from the monitor.

DC 5V Power Input

Connect the adapter to the camera.

· Installation

How to Install

CAUTION: If you use the system to watch a young child, do not place the camera in the

child's reach.

Wireless Monitor

1. Place the monitor in a place that will have clear

reception with your camera(s).

2. Pull out the stand.

`Do not pull up the stand lever with an excessive

force.

Wireless Camera

Before you install the camera, carefully plan where and how it will be positioned, and

where you will route the cable that connects the camera to the power adapter.

Before starting permanent installation, verify its performance by observing the image

on the monitor when camera is positioned in the same location/position where it will be

permanently installed and the monitor is placed in the location where it will be used

most of the time.

Installation Warnings

Aim the camera(s) to best optimize the viewing area: Select a location for the camera

that provides a clear view of the area you want to monitor, which is free from dust, and

is not in line-of-sight to a strong light source or direct sunlight.

Avoid installing the camera where there are thick walls or obstructions between the

camera and the monitor.

STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or

cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.

Only use the AC Adapters provided.

1. Carefully unpack the camera.

If you are installing cameras that did not come with the system, please see the

pairing camera section of this manual for details on installation.

2. Mount the camera to the wall.

Mark the position of the screw hole on the wall, and

drill hole and insert 1 screw, then firmly attach the

camera to the wall by placing the stand over the

installed screw and pushing the base downwards.

`To install on a concrete wall, drill a hole and use plastic

anchor to fix.

`Use the drilling template to drill holes on the wall for

camera installation. (Page 18)

`The camera can also be placed on a flat surface, such as a table or shelf, and no

mounting hardware is required.

3. Adjust the viewing angle of the camera.

Use the Pan, tilt control from the monitor to adjust the

viewing angle of the camera.

`Adjusting the camera with excessive force may

damage the unit.

InstallatIon

English ·

Appendix

Specications

Item Details

System General

Operating Frequency Range 2400 MHz~2483.5 MHz

Transmitting Power 17dBm Max

Monitor Sensitivity -88dBm

Type of Spread Spectrum TX FHSS

Type of Modulation GFSK

Data Rate 4Mbps

Transmission range Outdoor 300 m (Eye of Sight)

Wireless Camera

Image Sensor Type 1/4” Color CMOS Image Sensor

Effective Pixel H: 1280, V: 1024

Resolution 1280x720

Image Compression MPEG4

White Balance Auto

Lens EFL=4.5mm, F=2.0

Viewing Angle (Diagonal) 55 degree

IR LED Type/ Night Vision 8pcs IR LED – 940nm / 5m

Lullabies 4 songs (Monitor Remote On / Off)

Night Light Yes (only Manual On/Off on camera head)

Loud Speaker Output 0.8W, 90dB spl

Power Requirement DC 5V ± 10%

Power Consumption 5.1Watt (max)

VOX level detection High: 50dBA / Low: 60dBA

Item Details

Operating Temperature Range 0°C~+40°C

Operating Humidity Range 85% RH

Environment Rating Indoor use only

Pan Angle 300°

Tilt Angle 110°

Regulation Compliance FCC/CE

RoHS Compliance Yes for CE version only

Audio Built in Microphone/ Speaker

Weight 218g

Wireless Monitor

Display Type/Size Color TFT 5”

Resolution 800X480

Viewing Angle 12 o'clock

Digital Zoom x1, x1.5, x2

Real Time Clock (RTC) +/- 2sec / day

Feed Timer Alert Yes (beep sound)

Number of Camera Support Up to 4 cameras

Power Requirement Adapter : DC 5V ± 10%, Battery : 3.8 Li-ion

Loud Speaker Output 1W, 85dB spl

Power Consumption

6.7 Watt (max)

Operating Temperature Range 0°C~+40°C

Operating Humidity Range 85% RH

Environment Rating Indoor use only

Regulation Compliance FCC/CE

RoHS Compliance Yes for CE version only

appendIx

· Appendix

Troubleshooting

Problem Solution

No picture from a

camera

1. Check all connections to the camera. Make sure the adapter is plugged in.

2. Make sure that the cameras and monitor are both ON.

3. Make sure that the camera is in range of the monitor.

4. Make sure the camera and monitor are paired.

5. Adjust the monitor antenna to vertical position.

The picture is or has

become choppy

The picture may become choppy when experiencing a lower frame rate

(i.e. 10 frames per second vs. a higher 20 frames per second).

1. Try moving the camera closer to the monitor.

2. Remove obstructions between the monitor and camera.

3. Adjust the monitor antenna to vertical position.

No sounds (even with

both units turned on)

1. Make sure that the power adapter is connected to the camera.

2. The battery on the monitor may be dead, be sure to charge it using the

adapter included.

3. The monitor may be out of range of the camera; be sure to check if the

Range LED in on continuously.

Your BrightVIEW is

emitting an high

pitched noise/

feedback.

This sound is normal feedback which occurs if the monitor and camera are too

close together. Move them further apart.

`Low batteries will cause the supply current to become unstable and will affect the quality

of the video/audio. Please charge the battery fully for use for superior video.

Item Details

Audio Built in Microphone/ Speaker

Other Special Feature Volume control, Pairing

Battery Type Li-on

Battery Capacity 2500mAh, Replaceble

Battery time duration Min 4 hours

Weight 239g (battery inside)

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection

systems)

This marking on the product, accessories or literature indicates that the product and

its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of

with other household waste at the end of their working life. To prevent possible harm

to the environment or human health from uncontrolled waste disposal, please separate

these items from other types of waste and recycle them responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,

or their local government office, for details of where and how they can take these items

for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the

purchase contract. This product and its electronic accessories should not be mixed with

other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery

return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this

product should not be disposed of with other household waste at the end of their working

life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains

mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries

are not properly disposed of, these substances can cause harm to human health or the

environment.

To protect natural resources and to promote material reuse, please separate batteries from

other types of waste and recycle them through your local, free battery return system.

Samsung cares for the environment at all product manufacturing stages, and is taking

measures to provide customers with more environmentally friendly products.

The Eco mark represents Samsung devotion to creating environmentally friendly products,

and indicates that the product satisfies the EU RoHS Directive.

Inhaltsverzeichnis

Andere Samsung Babyphone Handbücher

Samsung

Samsung RemoteVIEW SEW-3020 Bedienungsanleitung

Samsung

Samsung WISENET SNH-V6410PN Bedienungsanleitung

Samsung

Samsung SEB-1019RW Bedienungsanleitung

Samsung

Samsung BabyView SEW-3057W Bedienungsanleitung

Samsung

Samsung Techwin BabyVIEW SEW-3036P Bedienungsanleitung

Samsung

Samsung SEW-3043W Bedienungsanleitung

Samsung

Samsung BrilliantVIEW SEW-3041W/EX Bedienungsanleitung

Samsung

Samsung Techwin SEW3040W Bedienungsanleitung

Samsung

Samsung BrilliantVIEW SEW-3041W Bedienungsanleitung

Samsung

Samsung SecureVIEW Bedienungsanleitung

Samsung

Samsung SmartCam SNH-1010N Bedienungsanleitung

Samsung

Samsung BrightVIEW Bedienungsanleitung

Samsung

Samsung Techwin SafeVIEW Babyview SEW-3037P Bedienungsanleitung

Samsung

Samsung SEW-3034WN Bedienungsanleitung

Samsung

Samsung CMD6638 Bedienungsanleitung

Samsung

Samsung SEW3040 Bedienungsanleitung

Samsung

Samsung SEW-3037W Bedienungsanleitung

Samsung

Samsung WISENET BabyView Bedienungsanleitung

Samsung

Samsung SEW-3030 Bedienungsanleitung

Samsung

Samsung RealVIEW SEW-3042W Bedienungsanleitung

Samsung

Samsung RealVIEW SEW-3042WN Bedienungsanleitung

Samsung

Samsung EzVIEW SEW-3022 Bedienungsanleitung

Samsung

Samsung SEW-3035WN Bedienungsanleitung

Samsung

Samsung SEW-3022WN Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Motorola

Motorola MBP15 Bedienungsanleitung

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung