Samsung 800 PN42A450PD Bedienungsanleitung

English - 1

Rear & Side Panel Jacks

PN42A450P1D/ PN50A450P1D

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/global/register.

POWER IN

DIGITAL AUDIO OUT (OPTICAL)

AUDIO OUT (R/L)

PC IN[PC]/[AUDIO]

DVI IN (HDMI 2) (AUDIO-R/L)

HDMI IN 1, 2

ANT IN

SERVICE

3D SYNC OUT

COMPONENT IN 1, 2 / AV IN 1

EX-LINK

HDMI IN 3

S-VIDEO (AV IN 2)

AV IN 2

HEADPHONE

($-)).

Video Input Performance Comparison

/ HDMI/DVI Best

/ PC/COMPONENT Better

S-VIDEO Good

VIDEO Normal

Audio Output Performance Comparison

OPTICAL (Digital) Best

AUDIO (Analog) Normal

BN68-01363D-00Eng.indd 1 2008-02-15 오후 8:09:03

English - 2

You can use the remote control up to a distance of about 23 feet from the TV.

Remote Control Buttons

➢The performance of the remote control may be affected by bright light..

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to directly select a channel.

–

Press to select additional channels

(digital and analog) being

broadcast by the same station. For

example, to select channel “54-3”,

press “54”, then press “–” and “3”.

MUTE

Press to temporarily cut off the

sound.

W.LINK

VOL

W.LINK

Press to increase or decrease the

volume.

CH LIST

Used to display Channel Lists on

the screen.

TOOLS

Use to quickly select frequently

used functions.

UP▲/DOWN▼/LEFT◄/ RIGHT►/

ENTER

Use to select on-screen menu

items and change menu values.

INFO

Press to display information on the

TV screen.

COLOR BUTTONS

Use these buttons in the Channel

list.

SRS

Selects SRS TruSurround XT

mode.

E.MODE

Press to select the preset display

and sound modes for sports,

cinema and games.

Use these buttons in the DMA and

Anynet+ modes.

( : This remote can be used

to control recording on Samsung

recorders with the Anynet+ feature)

SOURCE

Press to display all of the available

video sources.

PRE-CH

Tunes to the previous channel.

W.LINK

Press to change channels.

Controls the caption decoder.

(

Displays the main on-screen menu.

)

RETURN

Returns to the previous menu.

EXIT

Press to exit the menu.

MTS

Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast).

DMA (Digital Media Adapter)

Use this when connecting a

Samsung DMA device through an

HDMI interface and switching to

DMA mode.

For more information on the

operating procedures, refer to the

user manual of the DMA.

➢

This button is available when

“Anynet(HDMI-CEC)” is “On”.

(see page 65 of the owner's

manual)

FAV.CH

Press to switch to your favorite

channels.

P.SIZE

Press to change the screen size.

10 21

BN68-01363D-00Eng.indd 2 2008-02-15 오후 8:09:07

English - 3

Connecting to HDMI (High Definition Multimedia Interface)

Connect an HDMI Cable between

the HDMI IN(1, 2 or 3) jack on the

TV and the HDMI jack on the DVD

Player or Cable Box / Satellite

receiver (Set-Top Box).

Press the SOURCE button on the

remote control until you see the

DVD Player or Cable Box/Satellite

receiver (Set- Top Box)

signal (see

“To Select the Source” on page 10)

➢

Each DVD Player or Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

➢

When connecting a DVD Player or

Cable Box / Satellite receiver (Set-

Top Box), match the color of the

connection terminal to the cable.

Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI

Connecting to DVI (Digital Visual Interface)

Connect a HDMI/DVI Cable or DVI-

HDMI Adapter between the HDMI

IN 2 jack on the TV and the DVI jack

on the DVD Player or Cable Box/

Satellite receiver (Set- Top Box).

Connect Audio Cables between the

DVI IN (HDMI 2)

[R-AUDIO-L] jack on the TV and

the AUDIO OUT jacks on the

DVD Player or Cable Box/Satellite

receiver (Set-Top Box).

Press the SOURCE button on the

remote control until you see the

DVD Player or Cable Box/Satellite

receiver (Set- Top Box)

signal (see

“To Select the Source” on page 10)

➢

When connecting a DVD Player or

Cable Box / Satellite receiver (Set-

Top Box), match the color of the

connection terminal to the cable.

➢

When using an HDMI / DVI cable

connection, you must use the HDMI IN

2 jack.

➢

Each DVD Player or Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

TV Rear Panel TV Side Panel

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

HDMI Cable (Not supplied)

BN68-01363D-00Eng.indd 3 2008-02-15 오후 8:09:12

English - 4

Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables

Connecting to Y, PB, PR



Connect Component Cables

between the COMPONENT IN (1 or

2) [Y, PB, PR] jacks on the TV and

the COMPONENT [Y, PB, PR] jacks

on the DVD Player or Cable Box /

Satellite receiver(Set-Top Box).



Connect Audio Cables between

the COMPONENT IN (1 or 2) [R-

AUDIO-L] jacks on the TV and the

AUDIO OUT jacks on the DVD

Player or Cable Box / Satellite

receiver (Set-Top Box).

Press the SOURCE button on the

remote control until you see the

DVD Player or Cable Box/Satellite

receiver (Set- Top Box)

signal (see

“To Select the Source” on page 10)

➢

Component video separates the video

into Y (Luminance (brightness)), PB

(Blue) and PR(Red) for enhanced

video quality. Be sure to match

the component video and audio

connections. For example, if

connecting the video cable to

COMPONENT IN 1, connect the audio

cable to COMPONENT IN 1 also.

➢

Each DVD Player or Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

➢

When connecting a DVD Player or

Cable Box / Satellite receiver (Set-

Top Box), match the color of the

connection terminal to the cable.



Connect a Video Cable

(or S-Video Cable) between the AV

IN 2 [VIDEO] (or S-VIDEO) jack on

the TV and the VIDEO OUT jack on

the Camcorder.

Connect Audio Cables between the

AV IN 2 [L-AUDIO-R] jacks on the

TV and the AUDIO OUT jacks on

the Camcorder.

Press the SOURCE button on the

remote control until you see the

Camcorder signal (see “To Select the

Source” on page 10)

➢

Each Camcorder has a different back

panel configuration.

➢

When connecting a Camcorder, match

the color of the connection terminal to

the cable.

Connecting a Camcorder

Camcorder

TV Side Panel

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

S-Video Cable(Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

BN68-01363D-00Eng.indd 4 2008-02-15 오후 8:09:15

English - 5

Connecting to Video



Unplug the cable or antenna from

the back of the TV.

Connect the cable or antenna to the

ANT IN terminal on the back of the

VCR.



Connect an Antenna Cable between

the ANT OUT terminal on the VCR

and the ANT IN terminal on the TV.

Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN 1 [Y/VIDEO] or AV IN 2

[VIDEO] jack on the TV.

Connect Audio cables between the

AV IN 1 [R-AUDIO-L] jacks on the

TV and the AUDIO OUT jacks on

the VCR.

Press the SOURCE button on the

remote control until you see the VCR

signal (see “To Select the Source”

on page 10).

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢ 

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the

TV. If your VCR is stereo, you must connect two cables.

➢

Each VCR has a different back panel configuration.

➢

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a VCR

VCR Rear Panel

TV Side Panel

Video Cable (Not supplied)

Audio Cable

(Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

Connecting to S-Video

To begin, follow steps 1–3 in the

previous section to connect the

antenna or cable to your VCR and

your TV.

Connect a S-Video cable between

the [S-VIDEO] jack on the TV and

the S-VIDEO OUT jack on the VCR.

Connect Audio cables between the

AV IN 2 [R-AUDIO-L] jacks on the

TV and the AUDIO OUT jacks on

the VCR.

Press the SOURCE button on the

remote control until you see the VCR

signal (see “To Select the Source”

on page 10).

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

Each VCR has a different back panel configuration

VCR Rear Panel

TV Side Panel

S-Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

BN68-01363D-00Eng.indd 5 2008-02-15 오후 8:09:20

English - 6

Connect an Optical Cable

between the DIGITAL AUDIO OUT

(OPTICAL) jacks on the TV and the

Digital Audio Input (OPTICAL) jacks

on the Digital Audio System.

When a Digital Audio System is

connected to the DIGITAL AUDIO

OUT (OPTICAL) terminal:

Decrease the volume of the TV,

and adjust the volume level with the

system’s volume control.

➢

What is OPTICAL?

• Converts the electric signal into an

optical light signal, and transmits

it through glass fibers. S/PDIF is a

transmission system of digital audio

in the form of a light wave that uses

a glass conductor.

➢

5.1CH audio is possible when the TV

is connected to an external device

supporting 5.1CH.

➢

Each external input source device has

a different back panel configuration.

➢

When the COMPONENT IN or HDMI

IN jacks are connected, the Optical

jack on the TV outputs 2 channel audio

only. If you want to hear 5.1 channel

audio, connect the DIGITAL AUDIO

OUT (OPTICAL) jack on the DVD

player or Cable/Satellite Box directly to

an Amplifier or Home Theater, not the

TV.

Connecting a Digital Audio System

Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] on the TV

and AUDIO IN [L-AUDIO-R] on the

Amplifier / DVD Home Theater.

When an audio amplifier is

connected to the AUDIO OUT [R-

AUDIO-L] jacks terminals: Decrease

the volume of the TV, and adjust

the volume level with the Amplifier’s

volume control.

➢

Each Amplifier / DVD Home

Theater has a different back panel

configuration.

➢

When connecting an Amplifier / DVD

Home Theater, match the color of the

connection terminal to the cable.

Connecting an Analog Amplifier / DVD Home Theater

Digital Audio System

TV Rear Panel

Optical Cable (Not supplied)

Amplifier / DVD Home Theater

TV Rear Panel

Audio Cable (Not supplied)

BN68-01363D-00Eng.indd 6 2008-02-15 오후 8:09:26

English - 7

Using the D-Sub Cable

Connect a D-Sub Cable between

PC IN [PC] jack on the TV and the

PC output jack on your computer.

Connect a PC Audio Cable between

PC IN [AUDIO] jack on the TV and

the Audio Out jack of the sound card

on your computer.

Press the SOURCE button on the

remote control until you see the

signal (see “To Select the Source” on

page 10)

Connecting a PC

Using the HDMI/DVI Cable

Connect a HDMI/DVI cable between

the HDMI IN 2 jack on the TV

and the PC output jack on your

computer.

Connect a 3.5mm Stereo/2RCA

Cable cable between the DVI IN

(HDMI IN 2) [R-AUDIO-L] jack on

the TV and the Audio Out jack of the

sound card on your computer.

Press the SOURCE button on the

remote control until you see the

signal (see To Select the Source” on

page 10)

➢

Each PC has a different back panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

➢

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

Using the D-Sub Cable

Using the HDMI/DVI Cable

TV Rear Panel

3.5 mm Stereo plug to 2 RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

BN68-01363D-00Eng.indd 7 2008-02-15 오후 8:09:32

English - 8

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢

It may take a while before you see a full picture.

Turning the TV On and Off

Viewing the Menus

With the power on, press the MENU button.

The main menu appears on the screen. Its left side

has five icons:

Picture, Sound, Channel, Setup, Input.

 

Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s

sub-menu.



Press the EXIT button to exit.

➢

It takes about one minute until the on-screen

menu disappears.

Your TV can memorize and store all of the available channels

for both “off-air” (air) and cable channels. After the available

channels are memorized, use the CH

W.LINK

or CH

W.LINK

button

to scan through the channels. This eliminates the need to

change channels by entering the channel digits. There are

three steps for memorizing channels: selecting a broadcast

source, memorizing the channels (automatic) and adding and

deleting channels (Channel Lists).

Memorizing the Channels

Selecting the Video Signal-source

Press the ENTER button to select Antenna.

Press the ▲ or ▼ button to select Air or Cable,

then press the ENTER button.

Press the EXIT button to exit.

Mode : Standard

►

Cell Light 10

Contrast 100

Brightness 45

Sharpness 75

Color 55

Tint G 50 R 50

▼

PictureT V

Enter

Move Exit

Antenna : Air

Auto Program

Clear Scrambled Channel

Channel List

Name

Fine Tune

Signal Strength

ChannelT V

Enter

Move

Air

Cable

Return

Storing Channels in Memory

(Automatic Method)

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Press the ▲ or ▼ button to select Auto Program,

then press the ENTER button.

● Air: Air antenna signal.

● Cable: Cable antenna signal.

● Auto: Air and Cable antenna signals

Press the ▲ or ▼ button to select the antenna

connection, then press the ENTER button.

Antenna : Air

►

Auto Program

►

Clear Scrambled Channel

►

Channel List

►

Name

►

Fine Tune

►

Signal Strength

►

ChannelT V

Enter

Move Return

Auto ProgramT V

Select the antenna to execute the Auto

Program function.

Air

Cable

Auto

Start

Enter

Move Return

Start

Selects a cable signal type for your location.

Auto ProgramT V

Enter

Move Return

Analog

Digital

Start

STD

HRC

IRC

STD

HRC

IRC

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Press the MENU button.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Antenna : Air

►

Auto Program

►

Clear Scrambled Channel

►

Channel List

►

Name

►

Fine Tune

►

Signal Strength

►

ChannelT V

Enter

Move Return

BN68-01363D-00Eng.indd 8 2008-02-15 오후 8:09:36

English - 9

When selecting the Cable TV system:

Press the ENTER button to start the auto program.

Press the ▲ or ▼ to select the correct analog signal

cable system source from among STD, HRC, and

IRC, then press the ENTER button. If you have

Digital cable TV, select the cable system signal

source for both Analog and Digital.

● STD, HRC, and IRC identify various types of

cable TV systems. Contact your local cable

company to identify the type of cable system that

exists in your particular area. At this point the

signal source has been selected.

The TV begins memorizing all available stations.

● If you want to stop Auto Programming, press

the ENTER button. The Would you like to stop

the auto channel. message will be displayed.

Select Yes by pressing the ◄ or ► button.

P

ress the EXIT button to exit.

Auto Program

Auto Program in progress.

DTV Air : 5 Air : 3 Air 67

68 %

Stop

Enter Return

Auto Program

Would you like to stop the auto channel.

DTV Air : 5 Air : 3

Yes No

68 %

Enter

Move Return

Viewing the Channel Lists

You can display a list of all channels, added channels or

your favorite channels.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Press the ▲ or ▼ button to select Channel List,

then press the ENTER button.



Press the ▲ or ▼ button to select All, Added or

Favorite, then press the ENTER button.

To toggle between your all channels, add channels,

or favorite channels, use the red button on the

remote control.

● Red button: Press repeatedly to select All,

Added, or Favorite.

● Green button: Press to add all channels

deleted.

● Yellow button: Press to delete all channels

memorized.

Antenna : Air

►

Auto Program

►

Clear Scrambled Channel

►

Channel List

►

Name

►

Fine Tune

►

Signal Strength

►

Channel

T V

Enter

Move Return

All

►

Added

►

Favorite

►

Default List Mode : All

►

Channel ListT V

Enter

Move Return

Added

List Mode Delete All

Move Enter

DTV Air 2

Air 3

Air 4

Air 5

Air 6

Air 7

DTV Air 7-1

Air 9

DTV Air 9-1

Air 10

Air 11

DTV Air 11-1

Air 12

Air 13

Air 14

Air 15

Air 16

Return

Add All

BN68-01363D-00Eng.indd 9 2008-02-15 오후 8:09:37

English - 10

Use to select TV or other external input sources such as DVD

players or Set-top/Cable boxes connected to the TV.

Use to select the input source of your choice.

To Select the Source

Press the MENU button.

Press the ▲ or ▼ button to select Input, then press

the ENTER button.

Press the ENTER button again to select Source

List. Press the ▲ or ▼ button to select signal

source, then press the ENTER button.

➢

Available signal sources: TV,AV1, AV2,

S-Video, Component1, Component2, PC,

HDMI1, HDMI2, HDMI3.

➢

You can choose only those external devices

that are connected to the TV.

Your television has several setting options that allow you to

control the picture quality.

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions number

1 to 2.

Press the ▲ or ▼ button to select Cell Light,

Contrast, Brightness, Sharpness, Color, or Tint,

then press the ENTER button.

● Cell Light: Selects the brightness of PDP Cell Light.

● Contrast: Adjusts the contrast level of the picture.

● Brightness: Adjusts the brightness level of the

picture.

● Sharpness: Adjusts the edge definition of the

picture.

● Color: Adjusts color saturation of the picture.

● Tint: Adjusts the color tint of the picture by

compensating the red and green color.

Source List : TV

►

Edit Name

►

Anynet+(HDMI-CEC)

InputT V

Enter

Move Return

AV1 :

- - - -

AV2 :

- - - -

S-Video :

- - - -

Component1 :

- - - -

Component2 :

- - - -

PC :

- - - -

▼

Source ListT V

Enter

Move Return

You can select the type of picture which best corresponds to

your viewing requirements.

Press the MENU button to display the menu.

Press the ENTER button to select Picture.

Press the ENTER button to select Mode.

Press the ▲ or ▼ button to select Dynamic,

Standard, or Movie.

Press the ENTER button.

●

Dynamic: Select the picture for high-definition in

a bright room.

●

Standard

: Select the picture for the optimum

display in a normal environment.

●

Movie: Select the picture for viewing movies in a

dark room.

Picture Control

Mode :

Cell Light 10

Contrast 100

Brightness 45

Sharpness 75

Color 55

Tint G 50 R 50

▼

PictureT V

Enter

Move Return

Changing the Picture Standard

Customizing the Picture Settings

Mode : Standard

►

Cell Light 7

Contrast 80

Brightness 45

Sharpness 50

Color 50

Tint G 50 R 50

▼

PictureT V

Enter

Move Return

Press the ◄ or ► button to decrease or increase the

value of a particular item. Press the ENTER button.

Press the EXIT button to exit.

➢

When you make changes to Cell Light, Contrast,

Brightness, Sharpness, Color, or Tint(G/R) the

OSD will be adjusted accordingly.

➢

When in PC mode, Tint(G/R), Sharpness and

Color are not available.

➢

Each adjusted setting will be stored separately

according to its input mode.

Contrast 100

Move Adjust Return

Cell Light 10

Move Adjust Return

Dynamic

Standard

Movie

BN68-01363D-00Eng.indd 10 2008-02-15 오후 8:09:39

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Flachbildfernseher Handbücher

Samsung

Samsung LN65B650 - 65" LCD TV Bedienungsanleitung

Samsung

Samsung LN40C610N1F Bedienungsanleitung

Samsung

Samsung ME75B Bedienungsanleitung

Samsung

Samsung UN65F9000AF Leitfaden

Samsung

Samsung BN68-02714F-02 Installations- und Betriebshandbuch

Samsung

Samsung CL-25M2MQ Benutzerhandbuch

Samsung

Samsung UN55B7000 - 55" LCD TV Montageanleitung

Samsung

Samsung PN50A510P3F Kurzanleitung

Samsung

Samsung PN50C590 Bedienungsanleitung

Samsung

Samsung UN55ES8000G Leitfaden

Samsung

Samsung UN55ES7003F Leitfaden

Samsung

Samsung BN68-03116A-01 Bedienungsanleitung

Samsung

Samsung BN68-02712A-06 Bedienungsanleitung

Samsung

Samsung UN55D6420UF Bedienungsanleitung

Samsung

Samsung PN42C430 Bedienungsanleitung

Samsung

Samsung LNT3242HX/XAA Bedienungsanleitung

Samsung

Samsung UN60EH6002F Bedienungsanleitung

Samsung

Samsung UN60FH6003 Bedienungsanleitung

Samsung

Samsung UN40B7000 - 40" LCD TV Bedienungsanleitung

Samsung

Samsung LNT4032HX Bedienungsanleitung

Samsung

Samsung UN55C6400RF Bedienungsanleitung

Samsung

Samsung HP-R4272C Bedienungsanleitung

Samsung

Samsung series 4 460 Bedienungsanleitung

Samsung

Samsung BN68-03088A-01 Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

RCA

RCA MR53R400 Bedienungsanleitung

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung

Philips

Philips Magnavox 37MF331D/37 Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung