Samsung PN50A510P3F Bedienungsanleitung

English - 1

Rear Panel Jacks

PN50A510P3F

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/global/register.

POWER IN

DIGITAL AUDIO OUT (OPTICAL)

AUDIO OUT (R/L)

SERVICE 2

DVI IN (HDMI 2) (AUDIO-R/L)

HDMI IN 1, 2

ANT IN

SERVICE 1

EX-LINK

COMPONENT IN 1, 2 / AV IN

Video Input Performance Comparison

/ HDMI/DVI Best

/ PC/COMPONENT Better

S-VIDEO Good

VIDEO Normal

Audio Output Performance Comparison

OPTICAL (Digital) Best

AUDIO (Analog) Normal

BN68-01363L-00Eng.indd 1 2008-04-04 오후 2:05:54

English - 2

You can use the remote control up to a distance of about 23 feet from the TV.

Remote Control Buttons

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to directly select a channel.

–

Press to select additional channels

(digital and analog) being broadcast

by the same station. For example, to

select channel “54-3”, press “54”, then

press “–” and “3”.

MUTE

Press to temporarily cut off the sound.

VOL

Press to increase or decrease the

volume.

CH LIST

Used to display Channel Lists on the

screen.

TOOLS

Use to quickly select frequently used

functions.

UP▲/DOWN▼/LEFT◄/ RIGHT►/

ENTER

Use to select on-screen menu items

and change menu values.

INFO

Press to display information on the TV

screen.

COLOR BUTTONS

Use these buttons in the Channel list.

SRS

Selects SRS TruSurround XT mode.

E.MODE

Press to select the preset display and

sound modes for sports, cinema and

games.

Use these buttons in the DMA and

Anynet+ modes.

(

SRS

: This remote can be used

to control recording on Samsung

recorders with the Anynet+ feature)

SOURCE

Press to display all of the available

video sources.

PRE-CH

Tunes to the previous channel.

Press to change channels.

Selects SRS TruSurround XT mode.

(

Displays the main on-screen menu.

)

RETURN

Returns to the previous menu.

EXIT

Press to exit the menu.

MTS

Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast).

DMA (Digital Media Adapter)

Use this when connecting a Samsung

DMA device through an HDMI

interface and switching to DMA mode.

For more information on the operating

procedures, refer to the user manual of

the DMA.

 ➢ This button is available when

“Anynet+(HDMI-CEC)” is “On”.

(see page 67 of the Owner's

manual)

FAV.CH

Press to switch to your favorite

channels.

P.SIZE

Press to change the screen size.

SRS

➢

The performance of the remote control may be affected by bright light.

BN68-01363L-00Eng.indd 2 2008-04-04 오후 2:05:56

English - 3

Connecting to HDMI (High Definition Multimedia Interface)

Connect an HDMI Cable between

the HDMI IN (1, 2) jack on the TV

and the HDMI jack on the DVD

Player or Cable Box / Satellite

receiver (Set-Top Box).

Press the SOURCE button on the

remote control until you see the

Set-Top/Cable Box signal (see

“Viewing an External Signal Source”

on page 9).

Connecting to DVI (Digital Visual Interface)

Connect a HDMI/DVI Cable or DVI-

HDMI Adapter between the HDMI

IN 2 jack on the TV and the DVI jack

on the DVD Player or Cable Box/

Satellite receiver (Set-Top Box).

Connect Audio Cables between the

DVI IN (HDMI 2) [R-AUDIO-L] jack

on the TV and the DVD Player or

Cable Box / Satellite receiver (Set-

Top Box).

Press the SOURCE button on the

remote control until you see the

Set-Top/Cable Box signal (see

“Viewing an External Signal Source”

on page 9).

➢

Each DVD Player or Cable Box /

Satellite receiver (Set-Top Box) has a

different back panel configuration.

➢

When connecting a DVD Player or

Cable Box / Satellite receiver (Set-

Top Box), match the color of the

connection terminal to the cable.

➢

When using an HDMI / DVI cable

connection, you must use the HDMI IN

2 jack.

➢

Please make sure the HDMI source’s (Set-Top/Cable Box) power is on before selecting HDMI from the Source List on the TV.

What is HDMI?

• HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a single

cable.

• The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed.

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢

The TV may not output sound and pictures may be displayed with abnormal color when DVD Player or Cable Box / Satellite receivers

supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect

the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this

happens, contact the company that provided the DVD Player or Cable Box / Satellite receiver to confirm the HDMI version, then request

an upgrade.

➢

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

TV Rear Panel

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

HDMI Cable (Not supplied)

TV Rear Panel

Audio Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via HDMI

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via DVI

BN68-01363L-00Eng.indd 3 2008-04-04 오후 2:05:59

English - 4

Connecting to Y, PB, PR

Connect a Component Cable

between the COMPONENT IN (1 or

2) [Y, PB, PR] jacks on the TV and

the COMPONENT [Y, PB, PR] jacks

on the DVD Player or Cable Box /

Satellite receiver(Set-Top Box).

Connect Audio Cables between

the COMPONENT IN (1 or 2) [R-

AUDIO-L] jacks on the TV and the

AUDIO OUT jacks on the DVD

Player or Cable Box / Satellite

receiver (Set-Top Box).

Press the SOURCE button on the

remote control until you see the

Set-Top/Cable Box signal (see

“Viewing an External Signal Source”

on page 9).

➢

Component video separates the video into Y (Luminance (brightness)), PB(Blue) and PR(Red) for enhanced video quality. Be

sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1,

connect the audio cable to COMPONENT IN 1 also.

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢

When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the

cable.

Locate the A/V output jacks on the

camcorder.

Connect a Video Cable

between the AV IN [VIDEO]

jack on the TV and the VIDEO OUT

jack on the Camcorder.

Connect Audio Cables between the

AV IN [L-AUDIO-R] jacks on the TV

and the AUDIO OUT jacks on the

Camcorder.

Press the SOURCE button on the

remote control until you see the

Camcorder signal (see “Viewing an

External Signal Source” on page 9).

➢

Each Camcorder has a different back panel configuration.

➢

When connecting a Camcorder, match the color of the connection terminal to the cable.

Connecting a Camcorder

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

TV Rear Panel

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

Audio Cable (Not supplied)

Component Cable (Not supplied)

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via Component cables

BN68-01363L-00Eng.indd 4 2008-04-04 오후 2:06:02

English - 5

Unplug the cable or antenna from

the back of the TV.

Connect the cable or antenna to the

ANT IN terminal on the back of the

VCR.

Connect an Antenna Cable between

the ANT OUT terminal on the VCR

and the ANT IN terminal on the TV.

Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN [Y/VIDEO] jack on the TV.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN [R-AUDIO-L] jacks on the

TV.

Press the SOURCE button on

the remote control until you see

the VCR signal (see “Viewing an

External Signal Source” on page 9).

➢

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the

TV. If your VCR is stereo, you must connect two cables.

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a VCR

VCR Rear Panel

Video Cable (Not supplied)

Audio Cable

(Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD Home

Theater.

When an audio amplifier is

connected to the AUDIO OUT

[R-AUDIO-L] jacks terminals :

Decrease the volume of the TV,

and adjust the volume level with the

Amplifier’s volume control.

➢

Each Amplifier / DVD Home

Theater has a different back panel

configuration.

➢

When connecting an Amplifier / DVD

Home Theater, match the color of the

connection terminal to the cable.

Connecting an Amplifier / DVD Home Theater

Amplifier / DVD Home Theater

TV Rear Panel

Audio Cable (Not supplied)

BN68-01363L-00Eng.indd 5 2008-04-04 오후 2:06:06

English - 6

TV Rear Panel

3.5 mm Stereo plug to 2 RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

Connect an Optical Cable

between the DIGITAL AUDIO OUT

(OPTICAL) jacks on the TV and the

Digital Audio Input (OPTICAL) jacks

on the Digital Audio System.

When a Digital Audio System is

connected to the “DIGITAL AUDIO

OUT (OPTICAL)” jack:

Decrease the volume of the TV,

and adjust the volume level with the

system’s volume control.

What is OPTICAL?

• An optical cable converts an electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission

system of digital audio in the form of a light wave that uses a glass conductor.

➢

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

➢

Each Digital Audio System has a different back panel configuration.

➢

When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying

a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component

such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite

Box directly to an Amplifier or Home Theater, not the TV.

Connecting a Digital Audio System

Digital Audio System

TV Rear Panel

Optical Cable (Not supplied)

Using the HDMI/DVI Cable

Connect a HDMI/DVI cable between

the HDMI IN 2 jack on the TV

and the PC output jack on your

computer.

Connect a 3.5mm Stereo mini-

plug/2RCA cable between the DVI IN

(HDMI 2) [R-AUDIO-L] jack on the TV

and the Audio Out jack of the sound

card on your computer.

➢

Each PC has a different back panel

configuration.

➢

When connecting a PC, match the

color of the connection terminal to the

cable.

➢

When using an HDMI/DVI cable

connection, you must use the HDMI IN

2 terminal.

Connecting a PC

BN68-01363L-00Eng.indd 6 2008-04-04 오후 2:06:09

English - 7

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢

It may take a while when your TV starts.

Turning the TV On and Off

Viewing the Menus and Displays

Viewing the Display

Press the INFO button on the remote control.

The TV will display the channel, the type of sound,

and the status of certain picture and sound settings.

Viewing the Menus

The display identifies the current channel and the status of

certain audio-video settings.

With the power on, press the MENU button.

The main menu appears on the screen. The menu’s

left side has icons:

Picture, Sound, Channel, Setup, Input,

Application.

Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s

sub-menu.

Press the EXIT button to exit.

➢

It takes about one minute until the on-screen

menu disappears.

Memorizing the Channels

Selecting the Video Signal-source

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV(i.e., an air or a cable system).

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

2Press the ENTER button to select Antenna.

Press the ▲ or ▼ button to select Air or Cable,

then press the ENTER button. Press the EXIT

button to exit.

Storing Channels in Memory (Automatic Method)

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Press the ▲ or ▼ button to select Auto Program,

then press the ENTER button.

Press the button to select an antenna connection,

then press the ENTER button.

➢

Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

TV #1 Sun, Sep 3 1:45 pm

M. Spillane’s Mike Hammer

Bonocrunch

DTV Air

13-1

Dolby Digital

480i 4:3 English

12:59 pm - 1:59 pm

SRS

Mode :Standard

Cell Light : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture

SRS

Antenna

Air

Auto Program

Channel List

Clear Scrambled Channel

Fine Tune

Signal Strength

Air

Cable

Channel Channel

Antenna : Air

Auto Program

►

Channel List

Clear Scrambled Channel

Fine Tune

Signal Strength

Auto Program

Select the Antenna source to memorize.

Air

Cable

Auto

ReturnEnterMove

Start

Continued...

BN68-01363L-00Eng.indd 7 2008-04-04 오후 2:06:11

English - 8

When selecting the Cable TV system:

Press the ENTER button to start the auto program.

Press the ▲, ▼, ◄, ► to select the correct analog

signal cable system source among STD, HRC, and

IRC, then press the ENTER button. If you have

Digital cable TV, select the cable system signal

source for both Analog and Digital.

➢

STD, HRC, and IRC identify various types of

cable TV systems. Contact your local cable

company to identify the type of cable system

that exists in your particular area. At this point

the signal source has been selected.

The TV begins memorizing all available stations.

If you want to stop Auto Programming, press the

ENTER button.

The Stop Auto Program? message will be

displayed. Select Yes by pressing the ◄ or ►

button, then press the ENTER button.

Press the MENU button to display the menu.

Press the ENTER button to select Picture.

Press the ENTER button to select Mode.

Press the ▲ or ▼ button to select Dynamic,

Standard, or Movie, then press the ENTER button.

Picture Mode

• Dynamic: Select the picture for high-definition in a

bright room.

• Standard: Select the picture for the optimum display

in the normal environment.

• Movie: Select the picture for viewing movies in a

dark room.

Picture Control

Changing the Picture Standard

You can select the type of picture which best corresponds to your

viewing requirements.

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions number 1

to 2.

Press the ▲ or ▼ button to select Cell Light,

Contrast, Brightness, Sharpness, Color, or Tint

(G/R), then press the ENTER button.

Press the ◄ or ► button to decrease or increase the

value of a particular item. Press the ENTER button.

Press the EXIT button to exit.

➢

• When you make changes to Cell Light,

Contrast, Brightness, Sharpness, Color, or

Tint (G/R) the OSD will be adjusted accordingly.



• When in PC mode, Tint(G/R), Sharpness and

Color are not available.



•Each adjusted setting will be stored separately

according to its input mode.

• Cell Light: Selects the brightness of PDP Cell Light.

• Contrast: Adjusts the contrast level of the picture.

• Brightness: Adjusts the brightness level of the

picture.

• Sharpness: Adjusts the edge definition of the

picture.

• Color: Adjusts color saturation of the picture.

• Tint(G/R): Adjusts the color tint of the picture by

compensating the red and green color

Customizing the Picture Settings

Auto Program

Auto Program in Progress.

Stop

Cable 3

DTV Air : 5 Air : 4

DTV Cable : -- Cable : --

Enter Return

Auto Program

Select the cable system.

Analog

Digital

HRC IRC

HRC IRCSTD

Start

ReturnEnterMove

STD

Picture

Mode

Cell Light : 7

Contrast : 80

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Dynamic

Standard

Movie

7Cell Light

ReturnEnterAdjustMove

BN68-01363L-00Eng.indd 8 2008-04-04 오후 2:06:12

English - 9

To Select the Source

Press the MENU button.

Press the ▲ or ▼ button to select Input, then press

the ENTER button.

Press the ENTER button again to select Source

List. Press the ▲ or ▼ button to select a signal

source, then press the ENTER button.

➢

Available signal sources: TV, AV, Component1,

Component2, HDMI1, HDMI2/DVI.

➢

You can choose only those external devices

that are connected to the TV.

In the Source List, connected inputs will be

highlighted and sorted to the top. Inputs that

are not connected will be sorted to the bottom.

➢

Using the Color buttons on the remote with the

Source list.

• Red (Refresh): Refreshes the connecting

external devices.

• TOOLS (Option): Displays the Edit Name and

Information menus.

Source List

Edit Name

Input

SRS

----

Component1

----

Component2

----

HDMI1

----

HDMI2/DVI

----

Refresh Option

TOOLS

BN68-01363L-00Eng.indd 9 2008-04-04 오후 2:06:12

English - 10

If the TV seems to have a problem, first try this list of possible problems and solutions.

If none of these troubleshooting tips apply, call your nearest Samsung service center.

Problem Possible Solution

Poor picture quality. - Try another channel.

- Adjust the antenna.

- Check all wire connections.

Poor sound quality. - Try another channel.

- Adjust the antenna.

No picture or sound. - Try another channel.

- Press the SOURCE button.

- Make sure the TV is plugged in.

- Check the antenna connections.

- Make sure the MUTE button is off.

No sound or sound is too low at

maximum volume.

First, check the volume of units connected to your TV (digital broadcasting receiver,

DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.

Picture rolls vertically. Check all connections.

The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on. Make sure the wall outlet is working.

Remote control malfunctions - Replace the remote control batteries.

- Clean the upper edge of the remote control(transmission window).

- Check the battery terminals.

- Make sure the remote has batteries.

- Check that the “+” and “-” ends of the batteries are inserted correctly.

Digital broadcasting screen problem. Please check the digital signal strength and input antenna.

The image is too light or too dark. - Adjust the Brightness and Contrast.

- Adjust the Fine tuning.

The image is too large or too small. Adjust the Size settings.

The visual qualities of digital

channels vary.

The visual qualities of digital channels may vary depending on the original production

method(analog or digital).

- If the original production method is digital: High visual quality.

- If the original production method is analog: The digital program displayed on the

screen is originally an analog program which has been converted to digital.

The visual quality is of an SD(Standard Definition) grade.

Screen is black and power indicator

light blinks steadily.

On your computer check; Power and Signal Cable.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.

On your equipment check (STB, DVD, etc) ; Power and Signal Cable.

The TV is using its power management system.

Press the Source button on the panel or remote control.

Turn the TV off and on.

Although the TV caption shows HD,

the visual quality is not satisfactory.

The HD(High Definition) caption that appears when switching channels or when

pressing the Information button on the remote control means the selected channel is

a digital channel. If the broadcasting station converts an analog signal into digital and

transmits the signal, the visual quality may not be perfect.

A distorted picture appears in the

corner of the screen.

If Just Scan is selected in some external devices, a distorted picture may appear in the

corner of the screen. This symptom is caused by external devices, not the TV.

A strange sound is heard. This is caused by minor systems operation and is not a defect.

The “Resets all settings to the default

values” message appears.

This appears when you press and hold the EXIT button for a while. The product

settings are reset to the factory defaults.

Troubleshooting

BN68-01363L-00Eng.indd 10 2008-04-04 오후 2:06:12

Andere Handbücher für PN50A510P3F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Flachbildfernseher Handbücher

Samsung

Samsung PN50C550G1F Bedienungsanleitung

Samsung

Samsung UN19C4000PD Bedienungsanleitung

Samsung

Samsung LT-P2045U Einrichtungshandbuch

Samsung

Samsung CT-21K40ML Bedienungsanleitung

Samsung

Samsung PN50B860Y2F Bedienungsanleitung

Samsung

Samsung LNT3232HX - 32" LCD TV Bedienungsanleitung

Samsung

Samsung PN42B450BD Bedienungsanleitung

Samsung

Samsung BN68-03088A-01 Bedienungsanleitung

Samsung

Samsung UN85S9AF Bedienungsanleitung

Samsung

Samsung UN22D5003BF Bedienungsanleitung

Samsung

Samsung UN55C6500VF Bedienungsanleitung

Samsung

Samsung UN46B8000 - 46" LCD TV Bedienungsanleitung

Samsung

Samsung LN32A300JD Bedienungsanleitung

Samsung

Samsung LED 7450 Bedienungsanleitung

Samsung

Samsung HG40NA590 Bedienungsanleitung

Samsung

Samsung LN19D450G1D Bedienungsanleitung

Samsung

Samsung UN26EH4000FXZA Montageanleitung

Samsung

Samsung LT-P1745 Bedienungsanleitung

Samsung

Samsung UN40B7000WF Kurzanleitung

Samsung

Samsung PN58C590 Bedienungsanleitung

Samsung

Samsung CL-21M21MQ Benutzerhandbuch

Samsung

Samsung BN68-02618A-00 Bedienungsanleitung

Samsung

Samsung UN75F6400AF Bedienungsanleitung

Samsung

Samsung LW32A33W Kurzanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

RCA

RCA MR53R400 Bedienungsanleitung

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung

Philips

Philips Magnavox 37MF331D/37 Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung