Samsung SyncMaster 592V Bedienungsanleitung

Install driver Install programs

SyncMaster 591S/591SG/591V/594MG/592V/

794V/793DF/793MG/793SG/793V/

794MG/793S/783DF/788DF Plus

Notational

Failure to follow directions noted by this symbol could result in bodily harm or damage to

the equipment.

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Ground to prevent an electric shock

Power

When not used for extended periods of time, set your computer to a screen

saver.

zIf the same image is present for long periods of time, Phosphor Burnt can be

occured, or the screen may be blurred.

zThe images here are for reference only, and are not applicable in all cases (or

countries).

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage.

(Class l Equipment only.)

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon

them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Do not disconnect the power cord while using the monitor.

surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry

cloth.

zUsing the power cord with a dusty plug or connector may cause an

electric shock or fire.

To disconnect the apparatus from the mains, the plug must be pulled out

from the mains socket, therefore the mains plug shall be readily

operable.

zThis may cause an electric shock or fire.

Installation

Be sure to contact an authorized Service Center when installing your monitor in a

location with heavy dust, high or low temperatures, high humidity, and exposed

to chemical substances and where it operates for 24 hours such as at airports,

train stations etc.

Failure to do so may cause serious damage to your set.

Put your monitor in a location with low humidity and a minimum of dust.

zFailure to do so may cause electric shock or fire inside the monitor.

Do not drop the monitor when moving it.

zThis may cause damage to the product or the person carrying it.

Install the monitor base in a showcase or shelf so that the end of the

base does not protrude from the showcase or shelf.

zDropping the product may cause damage to the product or the person

carrying it.

Do not place the product on an unstable or small surface area.

zPlace the product on an even end stable surface ,as the product may fall

and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

zTake care, as someone, specifically children may trip over it.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

zOtherwise, this may cause fire.

Keep any heating devices away from the power cable.

zA melted coating may lead to electric shock or fire.

Do not install the product in places with poor ventilation, for instance, a

bookshelf, closet, etc.

zAny increase in internal temperature may cause fire.

Set down the monitor carefully.

zThe monitor could be damaged or broken.

Do not place the monitor face down.

zThe CDT surface may be damaged.

Do not use the monitor without the monitor stand.

zIt could break down or cause fire due to bad ventilation.

zIf the monitor must be used without the supplied stand, take steps to

insure proper ventilation.

When installing the product, make sure to keep it away from the wall

(more than 10 cm/4 inches) for ventilation purposes.

zPoor ventilation may cause an increase in the internal temperature of

the product, resulting in a shortened component life and degraded

performance.

Keep the plastic packaging (bag) out of children’s reach.

zThe plastic packaging (bag) may cause suffocation if children play with

it.

Clean

When cleaning the monitor case or the surface of the CDT, wipe with a slightly

moistened, soft fabric.

Do not clean Flat monitor with water. Use a water-diluted mild detergent.

(Some detergents contain significant amounts of alcohol-based solvents, which

can damage (color change) or crack the monitor case. The antiglare/anti-static

surface coating on the CDT may also be affected.)

Dilute the detergent (1:10 ratio) with water before using.

Do not spray water or detergent directly onto the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

zYou may prevent the coated CDT from being damaged or the monitor

cabinet from being dissolved, cracked or discolored.

zYou may buy a recommended detergent at any Service Center.

If the connector between the plug and the pin is dusty or dirty, clean it

properly using a dry cloth.

zA dirty connector may cause electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

zOtherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using

a soft, dry cloth.

zDo not use any chemicals such as wax, benzene, alcohol, thinners,

insecticide, air freshener, lubricant or detergent.

Contact a Service Center or Customer Center for interior cleaning once a

year.

zKeep the product's interior clean. Dust which has accumulated in the

interior over an extended period of time may cause malfunction or fire.

Others

Do not remove cover(or back).

zThis may cause electric shock or fire.

zRefer to a qualified servicing company.

If your monitor does not operate normally - in particular, if there are any

unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or the Service Center.

zThis may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture;

do not install inside a vehicle.

zThis may cause malfunction, an electric shock or fire.

zEspecially avoid operating the monitor near water or outdoors where the

monitor could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off

and unplug the power cord. Then contact a Service Center.

zThe monitor may cause a malfunction, electric shock or fire.

Disconnect the plug from the outlet during storms or lightning or if it is

not used for a long period of time.

zFailure to do so may cause electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal

cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not move the monitor right or left by pulling only the wire or the

signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not cover the vents on the monitor cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects

on the monitor.

zThis may cause malfunction, an electric shock or fire.

zIf a foreign substance enters the monitor, unplug the power cord and

contact the Service Center .

Do not place any heavy objects on the monitor.

zThis may cause electric shock or fire.

Keep the product away from combustible chemical sprays or

inflammable substances.

zThis may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

zThis may cause electric shock, fire or injury.

Keep the monitor away from any magnetic substances.

zThis may cause discoloring or distortion of the image.

Viewing the monitor continuously at a too close angle may result in

damage to your eyesight.

To ease eye strain, take at least a five-minute break after every hour of

using the monitor.

Do not install the product on an unstable, uneven surface or a location

prone to vibrations.

zDropping the product may cause damage to the product or the person

carrying it. Using the product in a location prone to vibrations may

shorten the lifetime of the product or may catch fire.

When moving the monitor, turn off and unplug the power cord.

Make sure that all cables, including the antenna cable and cables

connected to other devices, are disconnected before moving the

monitor.

zFailure to disconnect a cable may damage it and lead to fire or an

electric shock.

Place the product out of children’s reach, as they could damage by

hanging onto it.

zA falling product may cause injury to the person or even fatality.

When not using the product for an extended time period, keep the

product unplugged

zOtherwise, this may cause heat emission from the accumulated dirt or

degraded insulation, causing electric shock or fire.

Do not place children's favorite objects (or anything else that may be

tempting) on the product.

zChildren may try to climb on the product to retrieve an object. The

product could fall, causing physical damage or even death.

Good Postures When Usin

the Monito

Try to maintain a good posture when using the monitor.

zKeep your back straight.

zKeep a distance of about 45 ~ 50 cm between your eyes

and the monitor screen. Look at the screen from slightly

above it, and have the monitor directly in front of you.

zTilt the monitor upwards by 10 ~20 degrees. Adjust the

monitor height so that the top of the monitor is slightly

below eye level.

zAdjust the monitor angle so that there is no reflected light

on the screen.Try to maintain your arms perpendicular to

your armpits.

zKeep your arms level with the back of your hands.

zKeep the angle of the elbow perpendicular.

zKeep the angle of the knees at more than 90 degree. Do

not let your feet fall up from the floor. Adjust the arm

position so that it is below the heart.

Please make sure the following items are included with your monitor.

If any items are missing, contact your dealer.

Contact a local deale

to bu

tional items.

Unpacking

Monitor and Stand

(Some models include a stand attached.)

Manual

Quick Setup Guide

Warranty Card

(Not available in all

locations)

User's Guide,

Monitor Driver,

Natural Color software,

icTune™ software

Cable

SyncMaster 591S/591SG/591V/594MG/793DF/793MG

793SG/793V/794MG/793S/783DF

Andere Handbücher für SyncMaster 592V

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Monitor Handbücher

Samsung

Samsung Visual Display Bedienungsanleitung

Samsung

Samsung F2080 - SyncMaster - 20" LCD Monitor Bedienungsanleitung

Samsung

Samsung BN68-00990V-03 Bedienungsanleitung

Samsung

Samsung S24A400UJE Bedienungsanleitung

Samsung

Samsung SyncMaster S24B750V Bedienungsanleitung

Samsung

Samsung SyncMaster 50S Bedienungsanleitung

Samsung

Samsung GS17VSSB Bedienungsanleitung

Samsung

Samsung LE55C Bedienungsanleitung

Samsung

Samsung U32J590UQ Series Bedienungsanleitung

Samsung

Samsung 943BWX - SyncMaster - 19" LCD Monitor Bedienungsanleitung

Samsung

Samsung LS32R750U Bedienungsanleitung

Samsung

Samsung SYNCMASTER 932MP Bedienungsanleitung

Samsung

Samsung SyncMaster 403T Bedienungsanleitung

Samsung

Samsung SyncMaster BX2031 Bedienungsanleitung

Samsung

Samsung 920NW - SyncMaster - 19" LCD Monitor Bedienungsanleitung

Samsung

Samsung SyncMaster S19B150N Benutzerhandbuch

Samsung

Samsung 400CX - SyncMaster - 40" LCD TV Bedienungsanleitung

Samsung

Samsung S20C301FL Bedienungsanleitung

Samsung

Samsung T23B550EW Bedienungsanleitung

Samsung

Samsung CMB5477L Referenzhandbuch

Samsung

Samsung SMT-4011 Bedienungsanleitung

Samsung

Samsung SyncMaster 152T Bedienungsanleitung

Samsung

Samsung CF21M Bedienungsanleitung

Samsung

Samsung Flip WM85A-W Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung