Samsung SyncMaster P2070 Bedienungsanleitung
ii
LCD MONITOR
quick start guide
P2070,P2270,P2370,P2070G,P2270G,P2370G
Introduction
Package Contents
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Monitor
Manuals
Quick Setup Guide Warranty Card
(Not available in all loca-
tions)
User's Guide
Cables
'DVI-A to D-Sub' Cable Power Cord DC-Adapter
Others
Cleaning Cloth Stand Body Stand Base
Note
Cleaning Cloth is only provided for highly polished black products as a product feature.
Sold separately
DVI Cable
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before
reaching the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Introduction
Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Customized Key[ ]
You can customize key assignment for the Custom button according to
your preferences.
Note
You can configure the customized key for a required function via Setup >
Customized Key.
Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
Adjust buttons [ ]
These buttons allow you to adjust items in the menu.
[] Button / [ ] Enter button
Activates a highlighted menu item.
Push the ' / ', then selects the video signal while the OSD is off. (When
the / button is pressed to change the input mode, a message ap-
pears in the upper left of the screen displaying the current mode -- analog
or digital input signal.)
Note
If you select the digital mode, you must connect your monitor to the graphic
card's DVI port using the DVI cable.
Introduction
AUTO button
Use this button for auto adjustment.
Power button [ ]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your ad-
justments are saved.
Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF
when it is not needed or when leaving it unattended for long periods.
Rear
Note
The configuration at the back of the product may vary from product to product.
DC 12V
Connect the DC adapter for your monitor to
the power port on the back of the monitor.
Plug the power cord for the monitor into a
nearby outlet. .
DVI IN port
Introduction
Connect the 'DVI-A to D-Sub' Cable to the
DVI-I port on the back of your monitor.
Kensington Lock
The Kensington Lock is a device used to
physically fix the system when using it in a
public place. The locking device has to be
purchased separately. The appearance and
locking method may differ from the illustra-
tion depending on the manufacturer. Refer to
the manual provided with the Kensington
Lock for proper use. The locking device has
to be purchased separately.
Note
The location of the Kensington Lock may be
different depending on its model.
Using the Anti-Theft Kensington
Lock
1. Insert the locking device into the Ken-
sington slot on the Monitor ( ) and turn
it in the locking direction ( ).
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a
heavy stationary object.
Note
See Connecting Cables for further information regarding cable connections.
Introduction
Connections
Connecting Cables
Connect the DC adapter for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor.
Monitor [DVI IN] PC [D-sub]
Connected to a Macintosh.
•Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection
cable.
Note
If you properly connect your monitor using the DVI-I connector but get a blank screen, check
to see if the monitor status is set to analog. Press power button to have the monitor double-
check the input signal source.
Using the Stand
Monitor Assembly
Monitor and Bottom
Folding the base
Note
You can tilt the monitor screen forward to adjust the angle to a particular angle.
Connections
Troubleshooting
Self-Test Feature Check-- P2070, P2070G --
Note
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, a message appears on the screen or the
screen goes blank although the power indicator LED is still on. The message may indicate
that the monitor is out of scan range or that you need to check the signal cable.
Environment
The location and the position of the monitor may influence the quality and other features of
the monitor.
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to
another room.
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3
feet (one meter) of the monitor.
Useful Tips
A monitor recreates visual signals received from the computer. Therefore, if there is a problem
with the computer or the video card, this can cause the monitor to become blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case, first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the monitor's working condition
If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1600
x 900 60 Hz" message comes up, disconnect the cable from the computer while the monitor
is still powered on.
If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
In this case, check the computer for trouble.
Check List
Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer.
No images on the screen. I cannot turn on the monitor.
Q: Is the power cord connected properly?
A: Check the power cord connection and supply.
Q: Can you see "Check Signal Cable" on the screen?
A: Check the signal cable connection.
(Connected using the DVI cable)
Press ‘ ’ button to have the monitor double-check the input signal source.
Q: If the power is on, reboot the computer to see the initial screen (the login screen), which
can be seen.
A: If the initial screen (the login screen) appears, boot the computer in the applicable mode
(the safe mode for Windows ME/XP/2000) and then change the frequency of the video
card.
(Refer to the Preset Timing Modes)
If the initial screen (the login screen) does not appear, contact the Service Center or
your dealer.
Q: Can you see "Not Optimum Mode", "Recommended Mode 1600 x 900 60 Hz" on the
screen?
A: You can see this message when the signal from the video card exceeds the maximum
resolution and frequency that the monitor can handle properly.
Troubleshooting
Andere Handbücher für SyncMaster P2070
3
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Samsung Monitor Handbücher
Samsung
Samsung SyncMaster S23A950D Bedienungsanleitung
Samsung
Samsung DM82D Bedienungsanleitung
Samsung
Samsung DM65D Bedienungsanleitung
Samsung
Samsung DC32E Bedienungsanleitung
Samsung
Samsung SyncMaster 650FP Bedienungsanleitung
Samsung
Samsung SyncMaster TC180 Bedienungsanleitung
Samsung
Samsung SMC-215 Bedienungsanleitung
Samsung
Samsung SyncMaster 305TPLUS Bedienungsanleitung
Samsung
Samsung C32HG70QQ Series Bedienungsanleitung
Samsung
Samsung SyncMaster 2043BW Bedienungsanleitung
Samsung
Samsung S32C39 Series Bedienungsanleitung
Samsung
Samsung 570DX - SyncMaster - 57" LCD Flat Panel... Bedienungsanleitung
Samsung
Samsung TS DR Series Installationsanleitung
Samsung
Samsung SyncMaster 225MS Bedienungsanleitung
Samsung
Samsung SyncMaster 957p Bedienungsanleitung
Samsung
Samsung S22B350T Bedienungsanleitung
Samsung
Samsung SyncMaster 2443NW Bedienungsanleitung
Samsung
Samsung S24A40 U Series Bedienungsanleitung
Samsung
Samsung T28C570EW Bedienungsanleitung
Samsung
Samsung 743BX - SyncMaster - 17" LCD Monitor Benutzerhandbuch
