Samsung SRM-872 Installationsanleitung

NETWORK VIDEO RECORDER

QUICK MANUAL

SRM-872

Cautions before Startup system

1. This system must be installed inside of vehicle.

2. Power supply should be connected to vehicle battery directly.

3. To extend power cord, use AWG(American Wire Gauge) 18 or thicker.

4. All installed cable should be fixed.

5. The guaranteed operating temperature range of this product is -25°C ~ 50°C (-13°F ~ 122°F).

6. The built-in HDD in the product, its guaranteed temperature range is 0°C ~ 60°C (32°F ~

140°F) and this may not properly work in low temperature. Mind keeping temperature of

system Use industrial use ‘Micro SD’(not included).

7. Set password for your wireless network if you use the product with a wireless router. Being

not protected with password or using the default wireless router password may expose your

video data to potential threat.

Package Contents

The following components are included in product box

NVR Main unit IO BOX Control Box

Power cable(1ea) RS232 connect cable(2ea) RJ45 UTP cable (2ea)

GPS Antenna Remote Control & Battery CD (User manual)

Quick Guide HDDfixscrewandKey Rear cover

Part color and design may differ due to the manufacture

Product Installation

Place GPS Antenna evenly out of vehicle toward the sky. If antenna installation is wrong, it

receives unstable data

VCC/ACC input range is 12Vdc ~ 24Vdc.

VCC power pin should be connected to battery on vehicle and connect ACC power pin to

accessory power on vehicle

ACC. Power means the power on when turn key at ‘ACC’ mode

1. Connect power on system.

2. System displays initial screen and start initializing.

3. It shows login screen.

4. To log in, select ‘admin’ and press ‘OK’. No password is configured at initial time.

*if there’s configured password, click password field and use virtual keyboard.(see picture)

5. System logs in as ‘Administrator’.

Note : password can be set up to 8 numbers with combination of number 0 to 9. Special

character (& # < > ` ~) are not allowed. To enter new password, go to ‘Menu->System->User’

page.

Shutdown system

1. Press ‘Menu’ and select ‘Shutdown’ system

Note:Only allowed user can shut down system.

Single Channel Live view

Enlarge selected channel as single full screen.

1. Move mouse to desired channel and double click left mouse button and enlarge selected

channel.

2. Double click again back to previous mode.

Move to Search mode

1. Click ‘Playback’ button on remote controller

2. Or Click Right mouse button on live mode and open contextual menu.

3. Select ‘Playback’ mode.

Emergency Recording

Record immediately on live mode

1. Press ‘Emergency Rec’ button on control box. It turns red.

2. Or use contextual menu (click right mouse button) and select ‘Emergency Rec’.

Playback control

R.Play: Reverse Playback (1x->2x->..64x -> 1x)

Step Backward: Go to the previous image

Pause: Freeze or Stop current image

Step Forward: Go to the next image

Play: Play the data at normal speed (1x->2x->..64x -> 1x)

Enter Setup menu

1. Click ‘Menu’ button on remote controller

2. Or Click ‘Menu’ button and enter setup mode

3. Or use contextual menu and select ‘Setup Menu’.

Backup

1. Click ‘Backup’ button on remote controller

2. Or Click right mouse button and open contextual menu.

3. Select ‘Backup’ on menu and set storage and duration to archive

4. Press ‘start’ to backup.

IP camera setup

Enter IP camera information and authorize it to check its working status.

1. Press ‘Settings’ on camera menu.

2. Enter IP, ports and ID/Password of desired IP camera.

3. Check ‘Authentication’ and press ‘Connect’ to check IP camera connection status.

4. Once ‘Log in’ success message means it connects normally.

If it fails, check information again.

5. Press ‘OK’ to save information.

Recording Setup

1. Press Menu and move to ‘Record->Record’.

2. Check ‘Overwrite’ option. *If not selected, system *Configured option will be applied to

whole channels.

Time Record is continuous recording

Event record is record only when event triggered.

Emergency Record: Activated by Emergency Rec. signal from outside

3. Press ‘Ok’ to save changes.

PROFILE SETUP

Network camera generally provides single or multiple profiles and user can select details such as

live, recording and network transmit profiles.

System shares added profiles. Once you edit profile on live, record or Network, it updates other

profiles.

Live Profile : ‘Menu->Device->Camera->Live profile’

Record Profile : ‘Menu->Recording->Recording->Record profile’

Network Profile : ‘Menu->Network->Transmission->Network profile’

Add profiles

1. Select one of profiles from Live, Recording and Network and move to that menu.

2. Press ‘Edit’ button on right and it shows current profile details.

3. To add new profile, press ‘+’ button below and set profile name, codec, resolution, fps and

Kbps information.

May differ available profiles by camera

4. Press ‘OK’ to save changes.

Appendix

System Specification

Video

SRM-872

N/W Camera Inputs Up to 8CH

Resolution CIF, VGA, 4CIF, 1.3M, 2M, 3M

Protocols ONVIF

Installation Camera Setup Resolution, Frame rate, bit rate setup.

Viewer Built-in Webviewer

Multi Screen

Monitor display 1/4/9

Performance

OS Embedded Linux

Recording Compression H.264, MJPEG

Rec. bit rate 64Mbps

Record Rate Up to 240fps @1280 x 720 (1.3M)

Record Mode Emergency, Schedule (Time/Event)

Overwrite modes

Continuous, Auto Deletion w/ Retention duration

Pre-alarm Up to 30 sec.

Post-Alarm Up to 6 hour.

Event Source Sensor, MD, V-Loss, G-Sensor, IP camera event

Network

Ethernet Gigabit Ethernet x 1, FE x8 w/PSE

Transmission

speed Up to 1Gbps.

Max. Remote

users Live (10)/ Search(3)/ Setup (1)

Protocol support TCP/IP, DHCP, SMTP, NTP, HTTP, DDNS, RTP, RTSP

Monitoring CMS, Webviewer, Smart-phone Viewer.

Connection Mode

Static/DHCP

Storage Internal HDD 1 HDD(2.5”) or 1 SSD

Removable Micro SD(Industrial, Max 32GB)

Backup USB 2 USB Ports (use 2 ports below)

File Format STRG(NVR Player), EXE(Include Player), AVI

Backup Viewer Search Playback on Google Map

Function 8ch Search/Playback, GPS information, G-Sensor

Interface

Video Inputs 8 RJ-45 (PoE Support)

Output 1 HDMI, 1 VGA, Up to 1080p

Audio

Inputs Network Camera audio input, up to 8CH

Compression G.711, G.726

Ext. Audio Output

1 Phone Jack (main unit), 1 RCA Connector(Control BOX)

Alarm Inputs Terminal 8 inputs, NO/NC

Outputs Terminal 8 outputs, NO/NC

Others Ethernet 1 RJ45 (10/100/1000 Base-T Ethernet)

USB 3 USB(2.0 High Speed)

GPS 1 SMA

Functions

Power

Management Shutdown Delay 1 Min. ~ 30 Min. (User selectable)

General

Electrical Input Voltage 12V ~ 24V DC

Power

consumption Max. 30 W

Camera Power

Output Max. 8 W per channel, Total 64W(PoE, IEEE 802.3af )

Environmental

Operating

Temp./Humidity -25°C to +50°C (-13°F to +122°F) / 20% to 85% RH

Mechanical Dimension

(W x H x D)

ㆍSYSTEM : 225.5(W)x 59(H) x 312.2(D) mm

ㆍI/O Box : 155(W) X 44(H) X 70(D) mm

ㆍControl Box : 121(W) X 32(H) X 75(D) mm

Weight

(With Out HDD)

ㆍSYSTEM : 2.17 Kg

ㆍI/O Box : 0.35Kg

ㆍControl Box : 0.18Kg

Approvals EMC/Safety CE, FCC, cUL, e-Mark, KCC, EN50155

Shock, Vibration MIL STD-810F method 514.5, EN61373

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsung techwin R&D Center, 701,Sampyeong-dong, Bundang-gu,Seongnam-si,Gyeonggi-do, Korea, 463-400

TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745

SAMSUNG TECHWIN AMERICA Inc .

100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660

Toll Free : +1-877-213-1222 Direct : +1-201-325-6920

Fax : +1-201-373-0124

www.samsungcctvusa.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park

Chertsey, Surrey, UNITED KINGDOM KT16 OPS

TEL : +44-1932-45-5300 FAX : +44-1932-45-5325

www.samsungtechwin.com

www.samsungsecurity.com

www.samsungipolis.com

Andere Handbücher für SRM-872

Inhaltsverzeichnis

Andere Samsung Netzwerk-Hardware Handbücher

Samsung

Samsung ES1642dc Gebrauchsanweisung

Samsung

Samsung SRN-1000 Bedienungsanleitung

Samsung

Samsung SRN-472S Bedienungsanleitung

Samsung

Samsung SNR-6400 Bedienungsanleitung

Samsung

Samsung SRN-472S Bedienungsanleitung

Samsung

Samsung NAS Series Gebrauchsanweisung

Samsung

Samsung XRN-1610S Bedienungsanleitung

Samsung

Samsung iPOLIS SRN-470D Bedienungsanleitung

Samsung

Samsung Wisenet SNK-B73040BW Bedienungsanleitung

Samsung

Samsung SRN-6450 Bedienungsanleitung

Samsung

Samsung SRM-872 Bedienungsanleitung

Samsung

Samsung Mobile WiMAX Outdoor RAS SPI-2331 Benutzerhandbuch

Samsung

Samsung SRN-4000 Bedienungsanleitung

Samsung

Samsung SRN-1000 Bedienungsanleitung

Samsung

Samsung SRN-4000 Bedienungsanleitung

Samsung

Samsung SNK-D85121BF Bedienungsanleitung

Samsung

Samsung HARMAN Epica DGX 16 Montageanleitung

Samsung

Samsung iPOLIS SRN-1670D Bedienungsanleitung

Samsung

Samsung SRN-1000 Bedienungsanleitung

Samsung

Samsung SRH-3000 Bedienungsanleitung

Samsung

Samsung SNK-D5081 Bedienungsanleitung

Samsung

Samsung SRM-872 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung

Cantek

Cantek NR310-4 Bedienungsanleitung