Samsung SF4500 Bedienungsanleitung

SF-4500/4500C

Msys4700/4800

MJ-4500C

SERVICEManual

INKJET PRINTER COMPOUND CONTENTS

1. Precaution

2. Specifications

3. Installations

4. Disassembly & Assembly

5. List of Abbreviations

6. Special Circuit Descriptions

7. Theory of Mechanism

8. Troubleshooting

9. Exploded Views and Parts List

10. Packing Diagram and Parts List

11. Electrical Parts List

12. Block Diagrams

13. PCB Diagrams

14. Schematic Diagrams

1-1Samsung Electronics

1-1 Safety Precautions

1. Be sure that all built-in protective devices are in

place. Restore any missing protective shields.

2. Make sure there are no cabinet openings through

which people- particularly children- might insert

fingers or objects and contact dangerous

voltages.

3. When re-installing chassis and assemblies, be

sure to restore all protective devices, including

control knobs and compartment covers.

4. Design Alteration Warning:

Never alter or add to the mechanical or electrical

design of this equipment, such as auxiliary

connectors, etc. Such alterations and

modifications will void the manufacturer’s

warranty.

5. Components, parts, and wiring that appear to

have overheated or are otherwise damaged

should be replaced with parts which meet the

original specifications. Always determine the

cause of damage or overheating, and correct any

potential hazards.

6. Observe the original lead dress, especially

near sharp edges, AC, and high voltage power

supplies. Always inspect for pinched,

out-of-place, or frayed wiring. Do not change

the spacing between components and the

printed circuit board.

7. Product Safety Notice:

Some electrical and mechanical parts have

special safety-related characteristics which might

not be obvious from visual inspection. These safe-

ty features and the protection they provide could

be lost if a replacement component differs from

the original. This holds true, even though the

replacement may be rated for higher voltage,

wattage, etc.

Components critical for safety are indicated in the

parts list with symbols . Use only replace-

ment components that have the same

ratings, especially for flame resistance and dielec-

tric specifications. A replacement part that does

not have the same safety characteristics as the

original may create shock, fire, or other

safety hazards.

Follow these safety, ESD, and servicing precautions to prevent personal injury and equipment damage.

1. Precautions

1-2 Samsung Electronics

1-2 ESD Precautions

Certain semiconductor devices can be easily

damaged by static electricity. Such components are

commonly called “Electrostatically Sensitive (ES)

Devices”, or ESDs. Examples of typical ESDs are:

integrated circuits, some field effect transistors, and

semiconductor “chip” components.

The techniques outlined below should be followed to

help reduce the incidence of component damage

caused by static electricity.

CAUTION: Be sure no power is applied to the

chassis or circuit, and observe all

other safety precautions.

1. Immediately before handling a semiconductor

component or semiconductor-equipped assembly,

drain off any electrostatic charge on your body by

touching a known earth ground. Alternatively,

employ a commercially available wrist strap

device, which should be removed for your per-

sonal safety reasons prior to applying power to

the unit under test.

2. After removing an electrical assembly equipped

with ESDs, place the assembly on a conductive

surface, such as aluminum or copper foil, or

conductive foam, to prevent electrostatic charge

buildup in the vicinity of the assembly.

3. Use only a grounded tip soldering iron to solder

or desolder ESDs.

4. Use only an “anti-static” solder removal device

Some solder removal devices not classified as

“anti-static” can generate electrical charges

sufficient to damage ESDs.

5. Do not use Freon-propelled chemicals. When

sprayed, these can generate electrical charges suf-

ficient to damage ESDs.

6. Do not remove a replacement ESD from its

protective packaging until immediately before

installing it. Most replacement ESDs are

packaged with all leads shorted together by

conductive foam, aluminum foil, or a

comparable conductive material.

7. Immediately before removing the protective

shorting material from the leads of a

replacement ESD, touch the protective material to

the chassis or circuit assembly into which the

device will be installed.

8. Maintain continuous electrical contact between

the ESD and the assembly into which it will be

installed, until completely plugged or soldered

into the circuit.

9. Minimize bodily motions when handling unpack-

aged replacement ESDs. Normal motions, such as

the brushing together of

clothing fabric and lifting one’s foot from a

carpeted floor, can generate static electricity

sufficient to damage an ESD.

1-3 Lithium Battery Precautions

1. Exercise caution when replacing a Lithium

battery. There could be a danger of explosion and

subsequent operator injury and/or

equipment damage if incorrectly installed.

2. Be sure to replace the battery with the same or

equivalent type recommended by the

manufacturer.

3. Lithium batteries contain toxic substances and

should not be opened, crushed, or burned for dis-

posal.

Precautions

Specification

Samsung Electronics 2-1

2. Specification

2-1 Printer Engine

2-2 Head

Technology

Speed Color (*1)

Mono (*2)

Resolution Color

Mono

Printing Width

Feeding Method Automatic

Manual Tray

Emulation

Printer Driver

Interface

Thermal Inkjet

1-pen & Print Head Swapping Type

3ppm at Draft Mode

8ppm at Draft Mode

600 x 600 dpi (1200 x 1200 dpi Addressable)

203mm

130 Sheets of 20lb cut sheets

Host Based Printing (GDI)

Windows 3.1/3.11, Windows 95/98 driver

IEEE 1284 Compatible Parallel Interface (ECP)

Ink M-3 Ink C-3

Print Head 208 nozzles 192 nozzles

Ink type Pigment Dye

Ink Color Black Color

Ink Yield about 600 sh. about 200 sh.

(*1) The average printing time with 15%/A4 test image of Samsung.

(*2) The average printing time with 4%/A4 test image of Samsung.

Specification

2-2 Samsung Electronics

2-3 Facsimile

Compatibility

Scan method

Scan width

Scan Resolution

Scan Speed

Feeding method

ADF

Guide

Stacker

Paper Tray

Modem Speed

Coding Method

LCD

Resolution

Gray Scale & Contrast

Capacity (*3)

Back-up Time

Confidential

Delayed

Group Dial

Forced Memory Tx.

Priority Tx.

Memory Rx.

ITU-G3

CIS

Max. 216mm, Effective: 210mm

300 x 300 dpi

3 sec

Sheet-fed

30 sheets

Document Input Guide

Document Output Stacker (No Paper Stacker)

BIN Type (No Manual Tray)

14.4 Kbps

MH, MR, MMR, Error Correction Mode

2 Lines Each of 16 Characters

Selectable by 1-Key, 2-LEDs

- Standard : 200 x 100 dpi

- Fine : 200 x 200 dpi (Default)

- Superfine : 300 x 300 dpi

Selectable by 1-Key, 2-LEDs

-Darken

- Lighten

- Photo : Error diffusion

SF-4500/Msys4700 : 1.0 Mbyte (Factory Option : 3M)

SF-4500C/Msys4800/MJ-4500C : 0.5 Mbyte (Factory Option : 2.5M)

30 Minutes (Continuous Power Failare)

Upto 30 Locations

5 Number Programmable

Yes

Automatic reception when paper empty.

GENERAL

SCANNING

MEMORY

(*3) Monochromatic CCITT NO. 1 CHART can be saved by 80 sheets per 1.0M Byte.

Specification

Samsung Electronics 2-3

2-3 Facsimile (continued)

One-touch Dial

Speed Dial

Chain Dial

Handset & Cradle

On-hook Dial

Last Number Redial

Auto Busy Redial

No Power Operation

Hold & Mute

Pause

Ringer Volume

Tone/pulse Select

Flash

Mercury

DRPD

TX/RX Journal

Image TCR

Delayed Dial List

System Data

Tel Number List

Help List

Multipage Copy

Gray Scale

Reduction &

Enlargement

Answering I/F

Ext. Phone

Polling

Sensors

Error Indicator

Voice Request

Real Time Clock

RTI

20 Locations

50 Locations

Yes

Option

Yes, 1-Key

Yes

UK : CALLING only, Other Country : No

Yes, Use Redial Key

S/W Option Setting (4Steps)

S/W Option setting (Pulse for NPO)

UK : Yes, Other Country : No

US : Yes, Other Country : No

Yes

Yes, Reduction of First Page Sent by Memory Tx

Yes

Upto 99 Pages

256 Levels

25%~200%

(Reference is the top center of Document)

Yes

1-jack, Extension Phone Transfer

Yes

No Paper, Paper Jam

1-LED

Yes, On-hook Dial

Yes

TELEPHONE

REPORT &

LIST

COPY

TEL I/F

OTHERS

Specification

2-4 Samsung Electronics

2-4 Scanner

Compatibility TWAIN

Technology Platen CIS

Light Source for Color CIS RGB LEDs (Line Order Control)

2-5 Power & Size

2-6 Accessaries

Power Source USA : 110V 60 Hz, UK/GER : 220V 50 HZ

Dimensions (W x D x H) 360 x 325 x 190 mm (Without Handset)

Weight 5.7Kg

Tel Handset / curlcord

Tel Line

Power Cord

Parrallel Cable

FAX Driver

Ink Cartridge

Manual

Carrier Sheet

Bundle S/W Contents (*5)

(one CD-ROM) Supply

1EA / 1EA

1EA

2 Diskettes

INK-M3 (MONO) 1EA (*4), INK-C3 (COLOR) 1EA (*4’)

Yes

Yes (*4)

Electronic Manual, Prt Driver, Presto page manager, Smart_Fax,

Photo Album, Twain Driver

Default

(*4) SF-4500/SF-4500C/Msys4700/Msys4800 only

(*4’) SF-4500C/MJ-4500C only

(*5) The smart_fax allows a on-screen remote control.

Samsung Electronics 3-1

3. Installation

3-1 Handset and Handset Cradle

1. Plug one end of the coiled cord into the jack on

the handset.

2. Plug the cradle’s modular cords into the modular

jacks on the left side of your machine.

3. Attach the handset cradle to the main body. Insert

the two tabs of the cradle into the slots on the left

side of the main body as shown, and push it up.

Note: If you want to remove the handset, slide it

down, then take it out.

1. Pull the document tray upward. 2. Fold out the extender on the document tray.

0000000000

00000000000000000000000000

Cradle Handset

Be sure to insert white

cord into the front hole

3-2 Document Tray

3-2 Samsung Electronics

3-3 Document Exit Tray

1. Insert the two tabs on the document exit tray into

the slots on the front of your machine. 2. Fold out the extender, if necessary.

3-4 Telephone Line

Plug one end of the telephone line cord into the TEL

LINE jack and the other end into a standard phone

wall jack.

Document exit tray Extender

3-5 Extension Phone (Optional)

Plug one end of the modular cord into the EXT.TEL

jack on the back of your machine.

Plug the other end of the cord into a modular

jack on a telephone answering device or a regular

telephone to use as an extension.

Samsung Electronics 3-3

3-6 AC Power Cord

Plug one end of the cord into the back of the

machine and the other end into a standard,

grounded 3-prong AC power outlet.

The machine turns on. All lamps on the control

panel light up and the LCD displays ‘SYSTEM

INITIAL’ then ‘PAPER OUT’. Load the paper as

described on page 3-4.

If you want to turn it off, unplug the power cord.

Note : If documents are deleted from memory due

to a power failure, the machine automatically

prints out a Power failure report after power is

supplied.

1. Connect a bi-directional parallel printer cable to

the 36 pin printer jack on your machine.

It is recommended to use the parallel cable that

supports IEEE-1284 bi-directional communica-

tions.

2. Fasten the metal clips to the parallel cable.

3. Connect the other end of the parallel cable to

your computer.

3-7 Connecting Printer Cable

Printer cable

Andere Handbücher für SF4500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Drucker Handbücher

Samsung

Samsung ML-1610XBH Bedienungsanleitung

Samsung

Samsung ML-2240 - 23 Ppm Mono Laser Printer Bedienungsanleitung

Samsung

Samsung ML-2245 Series Bedienungsanleitung

Samsung

Samsung CLP-510 - Color Laser Printer Bedienungsanleitung

Samsung

Samsung ML ML-2240 Bedienungsanleitung

Samsung

Samsung CLP-415NW Bedienungsanleitung

Samsung

Samsung CLP-650 Series Bedienungsanleitung

Samsung

Samsung ML-3051ND Betriebsanleitung

Samsung

Samsung ML-4600/XET Bedienungsanleitung

Samsung

Samsung CLP-315 Series Bedienungsanleitung

Samsung

Samsung ML-331xD Bedienungsanleitung

Samsung

Samsung SWL-2250U Bedienungsanleitung

Samsung

Samsung ML-1430 Bedienungsanleitung

Samsung

Samsung 3561ND - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung CLP 350N Referenzhandbuch

Samsung

Samsung Xpress C181xW Series Bedienungsanleitung

Samsung

Samsung ML-2010 - B/W Laser Printer Benutzerhandbuch

Samsung

Samsung C41x Series Bedienungsanleitung

Samsung

Samsung ML-2851ND/SEE Bedienungsanleitung

Samsung

Samsung ML-7300N Benutzerhandbuch

Samsung

Samsung ML-6050 Bedienungsanleitung

Samsung

Samsung ML-2010/SEE Bedienungsanleitung

Samsung

Samsung ML-2250 Series Betriebsanleitung

Samsung

Samsung CLP-680ND: CLP-775ND Benutzerhandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung