Samsung IPolis SNB-3000P Bedienungsanleitung

NETWORK CAMERA

User Manual SNB-3000(P)

2_ overview

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a

risk of electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance

to rain or moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/

wall in accordance with the installation instructions.

If this power supply is used at 24V ac, a suitable plug adapter should be

used.

The camera is to be only connected to PoE networks without routing to

the outside plant.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the

speciﬁcation sheet.

Using any other ada pter could cause ﬁre, electrical shock, or damage to

the product.

Incorrectly connecting the power supply or replacing battery may cause

explosion, ﬁre, electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the

capacity may cause abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure

connection may cause ﬁre.

English _3

●OVERVIEW

When installing the camera, fasten it securely and ﬁrmly. The fall of

camera may cause personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts,

etc.) or containers ﬁlled with water on top of the camera. Doing so may

cause personal injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may

cause ﬁre or electric shock.

If any unusual smells or smoke come from the unit, stop using the

product. In such case, immediately disconnect the power source and

contact the service center. Continued use in such a condition may cause

ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service

center. Never disassemble or modify this product in any way. (SAMSUNG

is not liable for problems caused by unauthorized modiﬁcations or

attempted repair.)

When cleaning, do not spray water directly onto parts of the product.

Doing so may cause ﬁre or electric shock

Do not expose the product to the direct airﬂow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome

due to temperature difference between internal and external of the dome

camera.

If you install this product in a low-temp area such as inside a cold store,

you must seal up the wiring pipe with silicon, so that the external air can

not ﬂow inside the housing.

Otherwise, external high, humid air may ﬂow inside the housing, pooling

moisture or vapor inside the product due to a difference between internal

and external temperature.

10.

11.

12.

overview

4_ overview

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep

away from a location subject to excessive vibration or magnetic

interference.

Do not install in a location subject to high temperature (over 50°C), low

temperature (below -10°C), or high humidity. Doing so may cause ﬁre or

electric shock.

If you want to relocate the already installed product, be sure to turn off

the power and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm.

Neglecting to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such

as sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects

ﬁlled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily

operable at any time.

When using the camera outdoors, moisture may occur inside the camera

due to temperature difference between indoors and outdoors. For this

reason, it is recommended to install the camera indoors. For outdoor

use, use the camera with built-in fan and heater.

10.

English _5

●OVERVIEW

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that

may cause undesired operation.

CAUTION

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct

the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the

Canadian Interference.-Causing Equipment Regulations of

ICES-003.

overview

6_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as powersupply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

English _7

●OVERVIEW

CONTENTS

OVERVIEW

6Important Safety Instructions

9Product Features

9Precautions – Installation and

Use

9Recommended PC Speciﬁcations

10 What’s Included

11 At a Glance

INSTALLATION &

CONNECTION

14 Mounting the lens

15 Inserting/Removing an SD

Memory Card

16 Memory Card Information (not

included)

18 Connecting with other Device

CAMERA SETUP

22 How to use the menu key

23 Main Menu

23 Proﬁle

24 Camera Setup

28 Privacy Zone

29 Others

30 System Info

NETWORK CONNECTION

AND SETUP

31 Connecting the Camera to an

Broadband Router with the

xDSL/Cable Modem

32 Connecting the Camera to an

Broadband Router with Local

Area Networking

33 Connecting the Camera Directly

to a DHCP-Based xDSL/Cable

Modem

34 Connecting the Camera Directly

to Local Area Networking

35 IP Address Setup

36 Static IP Setup

39 Dynamic IP Setup

40 Port Range Forward (Port

Mapping) Setup

41 Connecting to the Camera From

a Shared Local PC

41 Connecting to the Camera From

a Remote PC via the Internet

overview

8_ overview

WEB VIEWER

42 Connecting to the Camera

43 Login

44 Installing ActiveX

45 Using the Live Screen

46 Backup

49 Using the SD Search Viewer

Screen

SETUP SCREEN

50 Accessing the Setup Screen

50 Default Setup

55 System Setup

58 Overlay Setup

59 Event Setup

68 Network Setup

APPENDIX

69 Proﬁle

70 Terminology

72 Speciﬁcations

76 Frame Rate (NTSC)

82 Frame Rate (PAL)

88 Troubleshooting

90 GPL/LGPL Software License

English _9

●OVERVIEW

PRODUCT FEATURES

Support various communication protocols

Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various

internet protocols such as ARP, HTTP, HTTPS and DHCP.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Automatic Local IP Setup

Even a network novice can install it with minimum operations.

Alarm

If an alarm sensor is connected and it detects a motion, a message is sent to the

registered address via FTP/email (SMTP) or stored in the SD memory card, or an alarm

will signal to the alarm out terminal.

Intelligent Video Analysis (the event rule and the motion rectangle box are displayed

only in the MJPEG Live screen.)

If an event rule is deﬁned for the video analysis and it detects a motion in the conﬁgured

rule area, a message is sent to the registered address via FTP/email (SMTP) or stored in

the SD memory card, or an alarm will signal to the alarm out terminal.

ONVIF (Spec 1.01) Compliance

This product supports ONVIF Core Spec. 1. 01.

For more information, refer to www.onvif.org.

PRECAUTIONS – INSTALLATION AND USE

Do not bend or drop the SD memory card.

Do not store or use the SD memory card in a high temperature, high humidity or dusty

place.

Be careful not to apply foreign substances on the terminals of SD memory card.

In case of cleaning terminals, wipe gently with a soft cloth.

Before ejecting the SD memory card, release the checkbox <SD Card Record> in

<Alarm image> and press [Apply] button. (page 61)

If SD memory card have reached its lifespan, no data will be saved.

In this case, purchase a new one and replace the SD memory card.

RECOMMENDED PC SPECIFICATIONS

CPU : Pentium4 / 2.4GHz or higher

Operating System : Windows XP(Service Pack2, Service Pack3) / Windows Vista / Windows 7

Resolution : 1024X768 pixels or higher

RAM : 512MB or higher

overview

10_ overview

Web Browser : Internet Explorer 6.0 or higher

Video Card : Radeon, Nvidia

Video Memory: 128MB

DirectX 8.1 or higher

Compatible Broadband Routers

Linksys / D-Link / Netgear

Compatible PoE Switches

Linksys SRW224G4P / D-Link DES-1316 / SMC SMCPWR-INJ3

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera C Mount Adapter

Auto Iris Lens Connector

Camera Holder (Mount)

& Screws (2EA)

User Manual,

Installer S/W CD, CMS S/W DVD Quick Guide

Lens Options

CS Lens C Lens

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Sicherheitskamera Handbücher

Samsung

Samsung SCO-2030R Series Bedienungsanleitung

Samsung

Samsung SCC-C4253 Bedienungsanleitung

Samsung

Samsung SNV-7080N Bedienungsanleitung

Samsung

Samsung Samsung-T Protocol Bedienungsanleitung

Samsung

Samsung SNP-3370TH Bedienungsanleitung

Samsung

Samsung SCC-C4201(P) Bedienungsanleitung

Samsung

Samsung SCD-2010 Series Bedienungsanleitung

Samsung

Samsung iPolis SNB-5000 Bedienungsanleitung

Samsung

Samsung SCD-2022 Bedienungsanleitung

Samsung

Samsung iPolis SNB-5000 Bedienungsanleitung

Samsung

Samsung SNC-C7478 Bedienungsanleitung

Samsung

Samsung SCC-C9302P Bedienungsanleitung

Samsung

Samsung SVD-4120AW Bedienungsanleitung

Samsung

Samsung SID-452 Bedienungsanleitung

Samsung

Samsung SmartDome SCC-C6403P Bedienungsanleitung

Samsung

Samsung SND-5084R Bedienungsanleitung

Samsung

Samsung SCV-5085 Bedienungsanleitung

Samsung

Samsung SDC-425N Bedienungsanleitung

Samsung

Samsung SHC-373 Bedienungsanleitung

Samsung

Samsung SOC-4160 Bedienungsanleitung

Samsung

Samsung SMARTCAM SNH-E6440BN Bedienungsanleitung

Samsung

Samsung SIR-4150 Series Bedienungsanleitung

Samsung

Samsung SCV-2080 Bedienungsanleitung

Samsung

Samsung SNB-6010A Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

Samsung iPolis SNB-3000P Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken