Samsung SNC-B2331-FRA-QG Bedienungsanleitung

imagine the possibilities

Thanks you for purchasing this Samsung product.

To receive a more complete service, please visit

our website

www.samsungsecurity.com

RoHS compliant

Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical

and electronic equipment”, and we do not use the 6 hazardous materials- Cadmium (Cd), Lead

(Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Poly Brominated Biphenyls (PBBs), Poly Brominated

Diphenyl Ethers (PBDEs)- in our products.

SNC-B2331(P)

Quick Guide

Network Camera

SNC-B2331-ENG-QG.indd 1 2009-08-20 오전 11:42:32

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera C Mount Adaptor Camera Holder (Mount)

& Screws (2EA)

User Manual/

IP INSTALLER CD User Manual

Lens Options

CS Lens C Lens

SNC-B2331-ENG-QG.indd 2 2009-08-20 오전 11:42:34

English

AT A GLANCE

Front Side

Item Description

Camera Holder

(Mount) Holes

Used when you mount the camera onto the bracket by fixing the camera holder

(mount) adaptor with the bracket.

Auto Iris Lens

(Optional) Installed on the lens adaptor.

Auto Iris Lens

Connector Used to supply power and output signal to control the iris of the lens.

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied

ethanol.

M

SNC-B2331-ENG-QG.indd 3 2009-08-20 오전 11:42:35

Rear Side

Item Description

Video Out Port Video signal output port connected to the monitor.

System, Power

Indicators

SYSTEM

ON: The camera is turned on and connected to the network properly.

Blinking: During DDNS setup, or in case of setup failure, or in a state of

unstable network connection

OFF: When the system is rebooting, or turned off

POWER

ON: While the power is on

OFF: If the power is off

Reset Button

Resets the camera settings to the default.

Press and hold it for about 3 seconds to turn off the system indicator and restart

the system.

SYSTEM POWER

RESET

NETWORK

GND

1 2 3 4 5

VIDEO

AC 24V

LINK

ACT

DC 12V

1,2 : ALARM IN 1,2

3 : GND

4,5 : ALARM OUT 1,2

SNC-B2331-ENG-QG.indd 4 2009-08-20 오전 11:42:35

English

Power Port Used to plug the power cable.

Network Port Used to connect to the Network cable.

I/O Port

ALARM

IN 1,2 Used to connect the alarm input signal.

GND Used for earth-grounding.

ALARM

OUT 1,2 Used to connect the alarm output signal.

MOUNTING THE LENS

Disconnect the power before proceeding.

Mounting the CS lens

Turn the optional CS lens clockwise to insert it.

CS Lens

SNC-B2331-ENG-QG.indd 5 2009-08-20 오전 11:42:36

Mounting the C lens

Turn the C mount adaptor clockwise to insert it and do the same with the C lens.

Connecting the Auto Iris Lens connector

Insert the lens connector into the corresponding hole of the camera.

Focusing

Turn the lens left or right to control the zoom and focus the lens so that you can view a clear,

sharp object.

C Lens

SNC-B2331-ENG-QG.indd 6 2009-08-20 오전 11:42:36

English

CONNECTING WITH OTHER DEVICE

Connecting to the monitor

Connect the [VIDEO] port of the camera to the video input port of the monitor.

Network Connection

Connect the Network cable to the local network or to the Internet.

Monitor

Network

Power

SYSTEM POWER

RESET

NETWORK

GND

1 2 3 4 5

VIDEO

AC 24V

LINK

ACT

DC 12V

1,2 : ALARM IN 1,2

3 : GND

4,5 : ALARM OUT 1,2

SNC-B2331-ENG-QG.indd 7 2009-08-20 오전 11:42:37

Power Supply

Use the screwdriver to connect each line of the power cable to the corresponding port of the

camera.

Be careful not to reverse the polarity when you connect the power cable.

You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

STATIC IP SETUP

Manual Network Setup

Run <IP Installer.exe> to display the camera search list.

At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not

support this function.

Select a camera in the search list.

Find the MAC (Ethernet) address labeled on

the rear of the camera.

Both the [Auto Set] and [Manual Set]

buttons will be activated.

Click [Manual Set].

The MANUAL SET dialog appears.

The default values of <IP Address>,

<Subnet Mask>, <Gateway>, and <HTTP Port> of the camera will be displayed.

The default <PASSWORD> is 4321.

In the <ADDRESS> pane, provide the necessary information.

MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be

set automatically so you don't need to input it manually.

J

M

SNC-B2331-ENG-QG.indd 8 2009-08-20 오전 11:42:37

English

In the <PORT> pane, provide necessary

information.

HTTP Port : Used to access the camera

using the Internet browser, defaulted to

80. Use the spin button to change the

HTTP Port value. The start value of the

port is 80, and increases or decreases

by 6 like 10000, 10006, 10012.

Device Port : Used to control the video signal transfer, defaulted to 60001(TCP).

TCP Port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).

UDP Port : Video signal transfer port using the UDP Unicast method, defaulted to

60003(UDP).

Upload Port : Used to upgrade the software ﬁrmware, defaulted to 60004(TCP).

Multicast Port :

Video signal transfer port using the UDP Multicast method, defaulted

to 60005(UDP).

Enter the password.

This is the login password for the "root" user who accesses the camera.

The default password is "4321".

Click [OK].

Manual network setup will be completed.

When the manual setup including <IP> is completed, the camera will restart.



SNC-B2331-ENG-QG.indd 9 2009-08-20 오전 11:42:38

Auto Network Setup

Run <IP Installer.exe> to display the camera search list.

At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not

support this function.

Select a camera in the search list.

Find the MAC (Ethernet) address labeled on

the rear of the camera.

Both the [Auto Set] and [Manual Set]

buttons will be activated.

Click [Auto Set].

The AUTO SET dialog appears.

The <IP Address>, <Subnet Mask>, and

<Gateway> will be set automatically.

Enter the password.

This is the login password for the "root"

user who accesses the camera.

The default password is "4321".

Click [OK].

Auto network setup will be completed.

The camera will automatically complete

the network setting and restart.

M

SNC-B2331-ENG-QG.indd 10 2009-08-20 오전 11:42:38

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Sicherheitskamera Handbücher

Samsung

Samsung SID-600P Bedienungsanleitung

Samsung

Samsung VG-STC4000 Bedienungsanleitung

Samsung

Samsung SDC-5340BC Bedienungsanleitung

Samsung

Samsung SCZ-3430N Bedienungsanleitung

Samsung

Samsung SDC-415 Series Bedienungsanleitung

Samsung

Samsung SCB-2010 Bedienungsanleitung

Samsung

Samsung SCC-5399N Bedienungsanleitung

Samsung

Samsung Wisenet SNH-V6430BN Bedienungsanleitung

Samsung

Samsung SNP-6200 Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Samsung

Samsung SCC-B5313 Bedienungsanleitung

Samsung

Samsung SCP-3371 Bedienungsanleitung

Samsung

Samsung SNB-5000N Bedienungsanleitung

Samsung

Samsung SDC-5340BC Bedienungsanleitung

Samsung

Samsung SCD-2082 Bedienungsanleitung

Samsung

Samsung SDZ-330 Bedienungsanleitung

Samsung

Samsung SCC-B5394 Bedienungsanleitung

Samsung

Samsung SSC-C6433 Bedienungsanleitung

Samsung

Samsung SCP-3430H Bedienungsanleitung

Samsung

Samsung SNP-6321 Bedienungsanleitung

Samsung

Samsung SCC-B5353 Bedienungsanleitung

Samsung

Samsung VG-STC3000 Bedienungsanleitung

Samsung

Samsung SVD4600 Series Bedienungsanleitung

Samsung

Samsung IPOLIS SNP-3300 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

Security Cameras Direct

Security Cameras Direct CFC6042IR Bedienungsanleitung