Samsung SND-3080P Bedienungsanleitung

NETWORK CAMERA

User Manual SND-3080(P)

Trademark

is the registered logo of Samsung Techwin Co., Ltd.

The name of this product is the registered trademark of Samsung Techwin Co., Ltd.

Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this

document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of

Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but

no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on

the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document

without prior notice.

Warranty

If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve

the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:

If the system behaves abnormally because you run a program irrelevant to the system operation.

Deteriorated performance or natural worn-out in process of time

•

Network Camera

User Manual

English _3

●OVERVIEW

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or

moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/wall in accordance

with the installation instructions.

If this power supply is used at 24V ac, a suitable plug adapter should be used.

The camera is to be only connected to PoE networks without routing to the outside plant.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁre,

electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure connection may

cause ﬁre.

When installing the camera, fasten it securely and ﬁrmly. The fall of camera may cause

personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or

containers ﬁlled with water on top of the camera. Doing so may cause personal injury

due to ﬁre, electric shock, or falling objects.

overview

4_ overview

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁre or

electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In such

case, immediately disconnect the power source and contact the service center.

Continued use in such a condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service center. Never

disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused

by unauthorized modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing so may

cause ﬁre or electric shock

Do not expose the product to the direct airﬂow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome due to temperature

difference between internal and external of the dome camera.

If you install this product in a low-temp area such as inside a cold store, you must seal

up the wiring pipe with silicon, so that the external air can not ﬂow inside the housing.

Otherwise, external high, humid air may ﬂow inside the housing, pooling moisture or

vapor inside the product due to a difference between internal and external temperature.

10.

11.

12.

English _5

●OVERVIEW

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a

location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature

(below -10°C), or high humidity. Doing so may cause ﬁre or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and

then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting to do

so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this

may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with

liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any

time.

When using the camera outdoors, moisture may occur inside the camera due

to temperature difference between indoors and outdoors. For this reason, it is

recommended to install the camera indoors. For outdoor use, use the camera with built-

in fan and heater.

10.

overview

6_ overview

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause

undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his

own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian

Interference.-Causing Equipment Regulations of ICES-003.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

English _7

●OVERVIEW

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as powersupply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

overview

8_ overview

OVERVIEW

7Important Safety Instructions

10 Product Features

10 Recommended PC Speciﬁcations

11 What’s Included

12 At a Glance

CONTENTS

INSTALLATION &

CONNECTION

16 Removing the Covers

Inserting/Removing an SD Memory

Card

18 Memory Card Information

(Not Included)

19 Connecting with Other Device

21 Installation

CAMERA SETUP

How to Use the Keyboard Controller

25 Main Menu

25 Proﬁle

26 Camera Setup

31 Privacy Zone

32 Others

33 System Info

NETWORK CONNECTION

AND SETUP

Connecting the Camera to an IP

Router with the xDSL/Cable Modem

Connecting the Camera to an IP

Router With Local Area Networking

Connecting the Camera Directly to a

DHCP-Based xDSL/Cable Modem

37 Connecting the Camera Directly

to Local Area Networking

38 Buttons Used in IP Installer

39 Static IP Setup

42 Dynamic IP Setup

Port Range Forward (Port Mapping)

Setup

44 Connecting to the camera from a

shared local PC

44 Connecting to the camera from a

remote PC via the Internet

English _9

●OVERVIEW

WEB VIEWER

45 Connecting to the Camera

46 Login

47 Installing Activex

48 Using the Live Screen

49 Backup

51 Using the SD Search Viewer

Screen

SETUP SCREEN

52 Accessing the Setup Screen

53 Default Setup

58 System Setup

61 Overlay Setup

62 Event Setup

69 Network Setup

APPENDIX

70 Proﬁle

71 Terminology

72 Speciﬁcations

76 Frame Rate (NTSC)

82 Frame Rate (PAL)

88 Troubleshooting

90 GPL/LGPL Software License

overview

10_ overview

PRODUCT FEATURES

Support various communication protocols

Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various

internet protocols such as ARP, HTTP, HTTPS and DHCP.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Automatic Local IP Setup

Even a network novice can install it with minimum operations.

Alarm

If an alarm sensor is connected and it detects a motion, a message is sent to the registered

address via FTP/email (SMTP) or stored in the SD memory card, or an alarm will signal to the

alarm out terminal.

Motion Detection

If the camera with a speciﬁed motion area detects a motion in that area, it will send a notiﬁcation

to a user FTP/email account (SMTP) or stored in the SD memory card, or send the corresponding

signal to the Alarm Out terminal.

RECOMMENDED PC SPECIFICATIONS

CPU : Pentium4 / 2.4GHz or higher

Operating System : Windows XP(Service Pack2, Service Pack3) / Windows Vista /

Windows 7

Resolution : 1024X768 pixels or higher

RAM : 512MB or higher

Web Browser : Internet Explorer 6.0 or higher

Video Card : Radeon, Nvidia

Video Memory : 128MB

DirectX 8.1 or higher

Compatible IP Routers

Linksys

D-Link

Netgear

Compatible PoE Switches

Linksys SRW224G4P

D-Link DES-1316

SMC SMCPWR-INJ3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Sicherheitskamera Handbücher

Samsung

Samsung SNP-5300 Bedienungsanleitung

Samsung

Samsung C4235(P) Bedienungsanleitung

Samsung

Samsung iPolis SND-460V Bedienungsanleitung

Samsung

Samsung SCP-2273 Bedienungsanleitung

Samsung

Samsung HCD-E6070R Bedienungsanleitung

Samsung

Samsung SHC-735 Bedienungsanleitung

Samsung

Samsung SCC-C7435 Bedienungsanleitung

Samsung

Samsung SCZ-3250PD Bedienungsanleitung

Samsung

Samsung SCB-3001 Bedienungsanleitung

Samsung

Samsung Wisenet SDC-9443DF Bedienungsanleitung

Samsung

Samsung C6435(P) Bedienungsanleitung

Samsung

Samsung SCC-C9302(F) Bedienungsanleitung

Samsung

Samsung SBC-300AP Bedienungsanleitung

Samsung

Samsung SNC-L200 Bedienungsanleitung

Samsung

Samsung SNC-B2331-FRA-QG Bedienungsanleitung

Samsung

Samsung SCC-B5366 Bedienungsanleitung

Samsung

Samsung SID-370 Bedienungsanleitung

Samsung

Samsung iPolis SNO-5080R Bedienungsanleitung

Samsung

Samsung 911SNV6430 Bedienungsanleitung

Samsung

Samsung SCB-2010 Bedienungsanleitung

Samsung

Samsung SNO-7080R Bedienungsanleitung

Samsung

Samsung SCC-520 Bedienungsanleitung

Samsung

Samsung SCB-2020 Bedienungsanleitung

Samsung

Samsung SCO-2080 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung