Samsung Wisenet SDC-9443DF Bedienungsanleitung
SDC-9443DF
1080p HD Analog Dome Camera
User Manual
Copyright
©2016
Hanwha Techwin
Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered
trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially
or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal
guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Hanwha Techwin reserves the right to change the contents of this document without prior notice.
Design and specications are subject to change without prior notice.
1080p HD Analog Bullet Camera
User Manual
English _3
● OVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents
as they may deform or cause damage to the product.)
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
overview
4_ overview
overview
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is present within
this unit.
This exclamation point symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or
damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat
generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water
on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately
disconnect the power source and contact the service center. Continued use in such a condition may cause
fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this
product in any way. (Hanwha Techwin is not liable for problems caused by unauthorized modifications or
attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric
shock.
English _5
● OVERVIEW
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to
excessive vibration or magnetic interference.
2. Do not install in a location subject to high temperature, low temperature, or high humidity. Doing so may
cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall
it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or
damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the
CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus
6_ overview
overview
CONTENTS
OVERVIEW
3
3Important Safety Instructions
4Safety Precautions
6Contents
7Product Features
8Part Names and Functions
INSTALLATION
9
9Before Installation
CONNECTION AND INSTALLATION
11
11 Connection of DVR and monitor
11 Power connection
12 Use of Communication
12 Connection and Installation
CAMERA OPERATIONS
13
13 Camera Menus
13 Main menu
APPENDIX
22
22 Product Specification
24 Product Overview
25 Troubleshooting
English _7
● OVERVIEW
PRODUCT FEATURES
•High resolution
Use the 2 mega-pixel CMOS, and provide high resolution equivalent to 900TVL horizontal resolution.
•High sensitivity
The built-in high sensitive COLOR CMOS can produce a clear image. 0Lux (Auto IR LED On)
•D-WDR (Digit Wide Dynamic Range)
With the OV2710 CMOS sensor, this camera can provide a clear and quality image even under the
circumstance of backlight, by way of and accurate exposure for the dark area and reducing exposure for the
bright area: resulting in a clear, detailed and accurate image.
•Other Features
HLC, BLC, V-Flip/Mirror/Rotate, Sharpness and Privacy Zone.
•Communication
Support Coax (UTC) Communication.
•OSD
There are 8 languages available for the camera OSD.
- English, German, Italian, French, Spanish, Russian, Turkish and Portuguese
Package Contents
Check if the product package includes the following items.
SDC-9443DF User Manual Screw
Anchor 60ft Camera Cable
M `The appearance of the components may differ from the image shown.
`Depending on the model you purchased, there may be difference in the type and number of accessory.
8_ overview
overview
PART NAMES AND FUNCTIONS
Item Description
aPower input terminal: Connect the power as specified. (DC 12V)
bVIDEO OUTPUT jack: Video signals are output through this port. Connect this port to the Video IN port of an
AHD DVR.
cBottom Cover
dTop Cover
eLens: 3.6mm focal length enables you to monitor at a wider field of view.
fIllumination Sensor: Detects incoming light to control the IR LED.
gIR LED: Infrared LED lights are controlled by the illumination sensor.
a b
c d
e
g
f
English _9
●INSTALLATION
installation
BEFORE INSTALLATION
Ensure you read out the following instructions before installing the camera:
•You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
•Don’t let the cable to be caught in improper place or the electric line cover to be damaged.
Otherwise it may cause a breakdown or fire.
•When installing your camera, don’t allow any person to approach the installation site. If you have any important
issue to be dealt with at the site, please do move the camera away to avoid any damage or injury.
Disassembly
Put a minus screw driver with a 3mm to 6mm width head to any groove part of the camera and rotate 45° to
separate Bottom Cover and Top Cover.
Groove
Rotate 45°
10_ installation
installation
Installation
1. Select installation site. Fix the Bottom cover to the wall or
ceiling by using the 3 screws attached.
2. Connect DC 12V power supply to the camera.
3. Adjust camera position to make sure it points to the area you
would like to monitor.
4. Connect and fix the Top cover and main body to the
Bottom cover.
J `Please mind the installation position.
`Please do not touch the camera lens to avoid any dirt and
dust
Inhaltsverzeichnis
Andere Samsung Sicherheitskamera Handbücher
Samsung
Samsung SND-7084R Bedienungsanleitung
Samsung
Samsung SCC-643(P) Bedienungsanleitung
Samsung
Samsung SVD4600 Series Bedienungsanleitung
Samsung
Samsung SID-600P Bedienungsanleitung
Samsung
Samsung SOD14DC Bedienungsanleitung
Samsung
Samsung SCC-C4239P Bedienungsanleitung
Samsung
Samsung SPD-3300 Bedienungsanleitung
Samsung
Samsung SND-5080 Bedienungsanleitung
Samsung
Samsung SmartCam SNH-E6411BN Bedienungsanleitung
Samsung
Samsung SCD-6083R Bedienungsanleitung
Samsung
Samsung SCC-641(P) Bedienungsanleitung
Samsung
Samsung SND-L6013 Bedienungsanleitung
Samsung
Samsung SCC-B5366l Bedienungsanleitung
Samsung
Samsung SCC-C6323N Bedienungsanleitung
Samsung
Samsung SMARTCAM SNH-V6110BN Bedienungsanleitung
Samsung
Samsung SCV-2120N Bedienungsanleitung
Samsung
Samsung SCD-6081R Bedienungsanleitung
Samsung
Samsung SCB-1000 Bedienungsanleitung
Samsung
Samsung SNP-3430H Bedienungsanleitung
Samsung
Samsung SNP-5300 Bedienungsanleitung
