Samsung SDE-3004 Bedienungsanleitung

Great user manuals database on UserManuals.info

EZ View Kit

Quick Start Guide

SDE-3004

1. Connecting with Other Devices

2. Installation

3. Starting Up

4. REC & Play

5. Router & Port Forwarding Set Up

6. Web Browsing

7. Monitoring

Great user manuals database on UserManuals.info

English-2

1. CONNECTING WITH OTHER DEVICES

`Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain or

moisture.

`The camera satisfies the IP65 standard, and direct exposure to water or moisture may cause problem such as condensation.

ÚIf you do not use the Internet, just follow the steps below:

1 2 4 5 6 11 12 13 14 15 16 24

Broadband

Router or HUB

Local PC

Broadband Modem

1 2 3 4 G 1 COM G

ALARM IN ALARM OUT

NETWORK

USB

CONSOLE

VGA

AUDIO IN

AUDIO OUT

VIDEO OUT

DC 12V

1 2

3 4

Great user manuals database on UserManuals.info

English-3

2. INSTALLATION

Connect the camera to the Camera In port.

Connect the LAN cable and mouse.

The default connection for use of the Internet is as follows:

You can connect a USB HDD mouse to the USB port.

Connect the DC adaptor.

Connect the Video and Audio Out connectors to the

monitor.

For a PC monitor, use the VGA connector for the

connection.

VIDEO OUT Connection

AUDIO OUT Connection

VGA OUT Connection

LAN Mouse

Local PC

Broadband

Modem

Connect the modem to the

WAN port of the router and

connect each of the PC and

the set to the LAN port.

Broadband

Router or HUB

1 2 3 4 G 1 COM G

ALARM IN ALARM OUT

NETWORK

USB

CONSOLE

VGA

AUDIO IN

AUDIO OUT

VIDEO OUT

DC 12V

1 2 3 4 G 1 COM G

ALARMIN ALARM OUT

NETWORK

USB

CONSOLE

VGA

AUDIO IN

AUDIO OUT

VIDEO OUT

DC 12V

TO CAMERA SIDE ONLY

TO DVR SIDE ONLY

Connecting the Camera

`There are two labels affixed at the end of the jacks of camera

cable, indicating one of the jacks should be connected to DVR,

and the other should be connected to camera. Please check it

first before connection.

Great user manuals database on UserManuals.info

English-4

3. STARTING Up

Connect the power source.

5Press the [MENU] button on the remote control.

Select <Date/Time/Language> in <System> menu.

Use the mouse to adjust the time setting.

Select the Network menu. Sets the Connection type to

<Static IP> and enter the IP address. Click the <OK>

button.

ÚTo apply your setting click the <OK> button.

ÚIf using DI-624 manufactured by D-link

IP ADDRESS:192.168.1.200/

GATEWAY: 192.168.1.1 / SUBNET MASK: 255.255.255.0 /

1ST DNS SERVER: 168.126.63.1 / 2ND DNS SERVER:

168.126.63.2

When prompted, use the virtual keyboard to enter the

password (default: 4321) in the PASSWORD input box.

Using the Virtual Keyboard

6-1

ÚIf you don't change the “auto logout” item, please

refer 7. The login prompt in 6only appears when

you change the auto logout time.

ÚAll operations can be controlled with the mouse.

1. Use the direction buttons ($%_+) to move to a desired

character and press the [ENTER] button.

2. Use the < > button to erase the previous character.

3. Use the < > button to toggle the letter case.

4. Complete your input and when done, click <OK> to close the

virtual keyboard.

OK Cancel

`1 2 3 4 5 6 78 9 0 - =



q w e r t y u i o p [ ] \

Del

a s d f g h j k l ; ‘

Caps Lock

z x c v b n m , . /

Shift

Space Ctrl

System

Logout Return

Date/Time/Language

Permission Management

System Management

Log Information

Date/Time/Language

Holiday

Date 2012-01-01 YYYY-MM-DD

Time 08:14:24 24 Hours

Time Zone GMT

Time Sync. Setup

DST Dec First (Sun) 0 Dec First (Sun) 0

Language English

OK Cancel

Connection Mode

Connection Protocol

Connection Mode Static IP

Bandwidth 2Mbps

OK Cancel

IP 192.168. 1.200

Gateway 192.168. 1. 1

Subnet Mask 255.255.255. 0

DNS Manual 168.126. 63. 1

2012-01-01 01:10:25

ID admin

Password

OK Cancel

Great user manuals database on UserManuals.info

English-5

4. REC & pLAY

Press the [MENU] button on the remote control.

Select <Record>.

To change the record quality & resolution, select

<REC Quality & Resolution>.

If you change the setting of the resolution and the remaining

rate, the remaining count shows each available resolution.

Press the [SEARCH] button on the remote control.

Set each of the Record Schedule options.

To change the setting, set the channel then select the

time and date you when want to record.

Press the [ENTER] button while the cells are selected.

The record type will cycle through <No Recording>-

<Continuous>-<Event>-<Both(Cont&Evnt)>.

The default is as shown below.

Select a desired date in the calendar, and a desired

timeline in the Time bar, and press the <Play> button.

15-1

If you have set the event recording, you can play a

desired scene using the <Event Search> function. Set

a desired date in the calendar and the result will be

listed on the table.

Select one you desired and press the <Play> button.

15-2

The colored line indicates types of the recording data.

If you want to play a time specific data, enter an exact

time.

SYSTEM RECORD SIZE POSSIBLE FPS

NTSC

CIF 352 × 240 OFF, 1~30

2CIF 704 × 240 OFF, 1~30

4CIF 704 × 480 OFF, 1~30

PAL

CIF 352 x 288 OFF, 1~25

2CIF 704 x 288 OFF, 1~25

4CIF 704 x 576 OFF, 1~25

You can change the play speed or channel, or stop the

playback using the onscreen button bar.

Record

Logout Return

Recording Schedule

Event Record Duration

REC Quality & Resolution

Record Option

CH Resolution

Record Rate Record Quality 

1 CIF(S) 7fps Level4 

2 CIF(S) 7fps Level4 

3 CIF(S) 7fps Level4 

4 CIF(S) 7fps Level4 

REC Quality & Resolution

Standard Event

OK Cancel

Remaining count : 4CIF(L) : 22CIF(M) : 4CIF(S) : 8

Event Search

CAM 01

2012-01-01

Play Return

Previous/Next Page

2012/01/01 00:01:22

No. Date/Time Preview Event

3 02:47:54 ~ 02:48:59 Motion

2 00:39:06 ~ 00:40:30 Motion

1 00:01:22 ~ 00:02:28 Motion

Go to First Go to Last

Overlapped Data List1

2012-01-01 01:10:25

REC

Time Search

2012-01-01

Play Return

2012/01/01 00:01:17

Standard Schedule

Motion Etc

V.Loss

Go to First Go to Last

Zoom In Zoom Out

All Data

CAM 01

CAM 02

CAM 03

CAM 04

00:01

Overlapped Data List1

Great user manuals database on UserManuals.info

English-6

5. ROUTER & pORT FORWARDING SET Up

The following is configuration for the Internet connection.

This is a typical example.

In the Network Properties window, check the IP address

and gateway.

If you first connect to the router, you will see the “Setup Wizard” run that proceeds in the following order.

Connect to the router using the gateway address found

in step ‘ 18 ’ above.

POWER

REC

DIGITALVIDEO RECORDER

Cable/ADSL Modem

DDNS Server

(websamsung.net)

Local PC

Direct LAN

(Fixed/Static IP)

Broadband

Router or HUB

DVR

Internet

Port Forwarding

When the router setting is done, select Virtual Server in

the “Advanced” tab where you can configure the Port

Forwarding settings. Click “Apply” to apply your

settings.

`For more information, refer to the router guide of the manual CD.

(Model: D-LINK DI-624).

21-1

Running the Quick Connect program

`For more information, refer to the quick connect guide of the

provided manual CD.

21-2

It is easy for you to use DHCP setting for Quick Connection Program.

Path: Network Connection Mode Connection

Change: Static IP Dynamic IP

1. Insert the provided CD into your computer’s CD drive, and

double click “Quick Connect.exe” program to run it.

2. Click [Next >] button.

3. When < > appears on the right side of TCP Port and Web

port number, click [Next >] button.

4. Click [Finish] button to exit the program.

IP : 192.168.1.200

Protocol : TCP

Private Port : 4520~4524

Public Port : 4520~4524

IP : 192.168.1.200

Protocol : TCP

Private Port : 80

Public Port : 80

192.168.1.200

255.255.255.0

192.168.1.1

   

Great user manuals database on UserManuals.info

English-7

6. WEb bROWSING

In the address bar of Internet Explorer, enter the Set IP.

For the internal network, enter the Set Local IP and for the

external network, enter the DDNS address.

* Refer to the domain name of the set defined in DDNS

Menu.

`If you select <iPOLiS>, the “DDNS host address” item will be

displayed. iPOLiS users should register the device with the website

(Domestic (Korea): http://www.samsungipolis.co.kr, Overseas:

http://www.samsungipolis.com) and provide the user name.

(ex: Registered as SDE-300X_HOME)

Connect to the Web Viewer and enter the user ID and

password.

Default ID: admin, PW: 4321

`For more information, refer to the user manual. (Page 66)

`The default password can be exposed to a hacking thread so it is

recommended to change the password after installing the product.

Note that the security and other related issues caused by the

unchanged password shall be responsible for the user.

If the popup window is not activated, unblock the popup.

If you first connect to the PC, you will see

a message as shown.

Install the suggested ActiveX control.

If you first connect to the PC, you will see a message as

shown above. Click “Install” to install the suggested

software.

Connection Mode

Connection Protocol

Connection Mode Static IP

Bandwidth 2Mbps

OK Cancel

IP 192.168. 1.200

Gateway 192.168. 1. 1

Subnet Mask 255.255.255. 0

DNS Manual 168.126. 63. 1

EX. LAN http://192.168.1.200:80

(when you connect the set within Local

Network or know that IP)

WAN http://www.samsungipolis.com/User ID

(When you connect the set via External Network)

OK Cancel

DDNS

DDNS Site iPOLiS

Host Name www.samsungip...

User Name SDE-3004_HOME

User Password

DDNS Host Address http://www.samsungipolis.com/SDE-3004_HOME

English-8

7. MONITORING

If the DVR set is connected to the Internet in normal

network settings, you can set the DVR’s current time in

sync with the selected <Time Server> regularly if you

select to use <Time Server>.

If you want to use the DST functions, set it to ON.

Using a Smartphone

1. Download iPOLiS mobile to your Smartphone.

2. From the start screen of iPOLiS mobile, tap <Device List>.

The Add Device screen appears.

3. Register the DVR to the iPOLiS mobile.

`For more information, refer to the user manual.

(http://www.samsungcctv.com)

Right click the screen or press the [MODE] on the

remote control.

24-1

When the launcher menu appears, press the < >

button.

ÚYou can add or modify the screen transition interval

in “System > Device > Monitor” menu.

24-2

2012-01-01

01:10:25

2012-01-01 01:10:25

Date/Time/Language

Holiday

Date 2012 -01-01 YYYY-MM-DD

Time 08:14:24 24 Hours

Time Zone GMT+08:00

Time Sync. Setup Not Used

DST Dec First (Sun) 0H Dec First (Sun) 0H

Language English

OK Cancel

Time Synchronization Setup

OK Cancel

Synchronization Use

Time Server 203.248.240.103

Last Sync Time Fail

Activate as Server Use

1.X

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Sicherheitssystem Handbücher

Samsung

Samsung SDH-C75080 Bedienungsanleitung

Samsung

Samsung SSA-S2100 Bedienungsanleitung

Samsung

Samsung SSA-C100 Bedienungsanleitung

Samsung

Samsung SSC-21WEB Bedienungsanleitung

Samsung

Samsung SDR-B85300 Bedienungsanleitung

Samsung

Samsung iPolis SNM-128S Bedienungsanleitung

Samsung

Samsung SSC-12P Bedienungsanleitung

Samsung

Samsung SDE-5003 Bedienungsanleitung

Samsung

Samsung SDS-P5082 Bedienungsanleitung

Samsung

Samsung SDH-B73023BF Bedienungsanleitung

Samsung

Samsung Wisenet SNK-B73040BW Bedienungsanleitung

Samsung

Samsung SDS-P5080 Bedienungsanleitung

Samsung

Samsung SOD-14C4LN Bedienungsanleitung

Samsung

Samsung SOD-14C4LN Bedienungsanleitung

Samsung

Samsung SDS-P3042 Bedienungsanleitung

Samsung

Samsung SMO-152QN - Monitor + Camera 4 Bedienungsanleitung

Samsung

Samsung SMO-210DN Bedienungsanleitung

Samsung

Samsung SDR-B74301 Bedienungsanleitung

Samsung

Samsung SSA-S4000 Bedienungsanleitung

Samsung

Samsung SMO-151QN/XAAV Bedienungsanleitung

Samsung

Samsung SSA-P102 Bedienungsanleitung

Samsung

Samsung LTE eNB Bedienungsanleitung

Samsung

Samsung SSC-21WEB Bedienungsanleitung

Samsung

Samsung SCU-9051 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung