Samsung ADT Security Hub Bedienungsanleitung
ADT Security Hub
User Guide
This User Guide provides an introduction to the key features
of the ADT Security Hub. Visit SmartThings.com/Support-ADT
for more detailed information and customer support.
Contents
Intrusion Detection
• Introduction
• Arming the system
• Arming the system and bypassing detectors
• Disarming the system
• In the event of an intrusion
• In the event of a false alarm
• Advanced intrusion detection
• Home button
• Emergency button
• Manually notifying ADT
• System icons
• Local Walk Test
ADT Security Hub
A
B
Life Safety
• Introduction
• In the event of smoke or extreme temperatures
• In the event of carbon monoxide
• In the event of a water leak
C
Security Codes
• Master user code
• User codes
D
System Settings
E
Transferring Your ADT Security Hub
F
AADT Security Hub
Home button
• No lights: The system is not ready to be armed. One or
more protected doors or windows are open.
• Green: The system is ready to be armed. All protected
doors and windows are closed.
• Flashing green: The system is ready to be armed. All
protected doors and windows are closed but there is a
power outage.
• Flashing orange: The system is not ready to be armed. One
or more protected doors or windows are open, and there is
a power outage.
ADT Security Hub
Use the Home button to wake your ADT Security Hub from sleep
mode or to return to the Home screen. The Home button will
change color to show the status of your system:
• Red: The system is armed.
• Flashing red: The system is armed and an alarm has been
triggered.
Emergency Button
Home Screen
Home Button
Press the Emergency button to manually notify ADT of a panic,
re, or emergency event.
The touchscreen will display buttons for Panic, Fire, and Emergency.
Requires an optional ADT professional monitoring service.
Visit SmartThings.com/ADT for more information.
ADT Security Hub
Manually notifying ADT
ADT Security Hub
Use the Emergency button to manually notify ADT of a panic,
re, or emergency event.
The Emergency button changes color to show the status of
your system:
• No lights: The emergency button is not available.
• White: The emergency button is ready for use.
• Blinking white: An emergency alarm is in progress.
Emergency button
Requires an optional ADT professional monitoring service.
Visit SmartThings.com/ADT for more information.
Press and hold one of the Panic, Fire, or Emergency buttons for two
seconds. Your ADT Security Hub will notify ADT and an operator will
respond according to the terms of your monitoring service.
For compliance with ANSI/SIA CP-01-2010 and to help reduce the risk of
false alarms, you must press the Emergency button on the ADT Security
Hub, and then press and hold one of the Panic, Fire, or Emergency icons
for two seconds.
The following icons may appear at the top of the touchscreen:
System icons
ADT Security Hub ADT Security Hub
Power Connected
Power Not Connected
Low Backup Battery
System Sounds On
System Sounds Off
(Siren still active)
Dim Touchscreen
(Touch to dim screen)
Incoming Messages
(Touch to see messages)
4
Panic, Fire, and Emergency buttons on your ADT Security Hub:
BIntrusion Detection
Intrusion detection is provided by devices such as the ADT Door
and Window Detector or the ADT Motion Detector. These devices
are only active when armed by your ADT Security Hub.
If your home is protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren and
notify ADT as soon as an intrusion is detected and initiate an
emergency response.
If your home is not protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren as soon
as an intrusion is detected but will not notify ADT.
Visit SmartThings.com/ADT for more details on ADT professional
monitoring services and to see the full list of compatible detectors
and alarms.
Introduction
It is strongly recommended that you perform a weekly test of your
ADT Security Hub, detectors, and alarms:
Local walk test
Select System Settings from the Home screen.
Enter the Master User Code.
Select Walk Test.
Select Sensors Test and follow the on-screen instructions.
Select Console Test and follow the on-screen instructions.
1.
2.
3.
4.
5.
Tap or the Home button to exit Test Mode.6.
ADT Security Hub
• If a detector fails the Sensors Test, check that it’s
been installed correctly or visit SmartThings.com/
Support-ADT for assistance.
Press the Arm Stay button to arm the system when people or
large pets will remain in the house. This will arm all ADT Door and
Window Detectors but will not arm any ADT Motion Detectors. The
alarm will be activated if a protected door or window is opened.
Arming the system
Intrusion Detection
Press the Arm Away button to arm the system when everyone
leaves the house. This will arm all ADT Door and Window Detectors,
and all ADT Motion Detectors. The alarm will be activated if a
protected door or window is opened, or if motion is detected.
Pressing the Arm Away button will start a 60-second exit delay
countdown. This will give you enough time to leave the house
before the system is armed.
Intrusion Detection
Arm AwayArm Stay
If you try to arm the system while protected doors or windows are
still open, the ADT Security Hub will display a list of sensors that
are not ready to be armed.
Arming the system and bypassing detectors
You can press the Silence button to silence the countdown, or you
can press the Disarm button to cancel the countdown and leave
the system unarmed.
Intrusion DetectionIntrusion Detection
Disarm ButtonSilence Button
You can close the open doors or windows to remove the
warnings, or you can bypass these sensors by pressing the
Bypass All button and entering your user code.
Bypassed sensors do not protect doors or windows, and will
not activate the alarm siren, notify ADT, or send an alert to your
smartphone in the event of an intrusion. Bypassed sensors revert
to normal operation when the alarm system is next armed.
If the system is armed in Away Mode, it must be disarmed within
30 seconds of entering the house through a protected door or area.
Disarming the system
Press the Disarm button and enteryour user code to disarm the
system.
If the system is armed in Stay mode, it must be disarmed before
leaving the house through a protected door.
Intrusion DetectionIntrusion Detection
Disarm Button
You can also press the Quick Exit button to temporarily disarm
protected doors and start a 60-second exit delay countdown. This
will give you enough time to leave the house before the system is
re-armed.
Intrusion Detection
In the event of an intrusion
Areas protected by an ADT Motion Detector
The alarm siren will be activated immediately and continue
sounding for 4 minutes, or until a correct user code is entered
on the ADT Security Hub to disarm the system.
Doors and windows protected by an ADT Door and Window
Detector
The alarm siren will be activated immediately and continue
sounding for 4 minutes, or until a correct user code is entered
on the ADT Security Hub to disarm the system.
Intrusion Detection
Entry/exit doors protected by an ADT Door and Window Detector
The system will start a 30-second entry delay countdown,
giving you enough time to disarm the system by entering a
correct user code on the ADT Security Hub. If the system is not
disarmed in time, the alarm siren will be activated for 4 minutes
or until a correct user code is entered.
Quick Exit Button
Inhaltsverzeichnis
Andere Samsung Sicherheitssystem Handbücher
Samsung
Samsung SSC17WEB Bedienungsanleitung
Samsung
Samsung SSC-12P Bedienungsanleitung
Samsung
Samsung SMO-152QN - Monitor + Camera 4 Bedienungsanleitung
Samsung
Samsung SOD-14C4LN Bedienungsanleitung
Samsung
Samsung SMT-190DN - Monitor + DVR Bedienungsanleitung
Samsung
Samsung SSA-S4000 Bedienungsanleitung
Samsung
Samsung SSA-M2000 Bedienungsanleitung
Samsung
Samsung SDH-B84040BF Bedienungsanleitung
Samsung
Samsung SmartThings ADT Carbon Monoxide Alarm Bedienungsanleitung
Samsung
Samsung SME-2220N Betriebsanleitung
Samsung
Samsung SSC-17TQ Bedienungsanleitung
Samsung
Samsung SDS-P3042 Bedienungsanleitung
Samsung
Samsung SDR-B85300 Bedienungsanleitung
Samsung
Samsung SSA-C100 Bedienungsanleitung
Samsung
Samsung SMO-151QN/XAAV Bedienungsanleitung
Samsung
Samsung SMO-210DN Bedienungsanleitung
Samsung
Samsung Galaxy SmartTag2 Bedienungsanleitung
Samsung
Samsung LTE eNB Bedienungsanleitung
Samsung
Samsung SDS-P3042 Bedienungsanleitung
Samsung
Samsung SSA-R2010 Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung