Samsung NX-828 Bedienungsanleitung

For the following named product :

KEY TELEPHONE SYSTEM, NX-828

We hereby declare, that all major safety requirements, concerning to

Electro-Magnetic Compatibility (89/336/EEC) are fulfilled, as laid out

in the guidelines set down by the number states of the EEC commission.

This declaration is valid for all samples that are part of this

declaration, which are manufactured according to the production chart appendix.

This standards relevant for the evaluation of Electro-Magnetic Compatibility

requirements are as follows ;

EN55022 (1987 LIMIT CLASS B)

Radiated Emission :30 MHz ~1GHz

Conducted emission :150 MHz ~30 MHz

EN60555 (1992 LIMIT CLASS B)

Power Harmonics :2nd ~40th Harmonics

EN50082-1 (1992)

Radiated Susceptibility :27 MHz ~500 MHz (3V/m)

ESD :Air Discharge 8KV

EFT/BURST :AC Power Lines (1000V /5KHz)

I/O Lines (500V /5KHz)

IEC950(1991) Second Edition with Amendment 1(1992) and 2(1993) ;

EN60 950(1991) with Amdts. 1&2:EN41 003 and National Deviations

EC DECLATATION OF CONFORMITY

PUBLICATION INFORMATION

SAMSUNG ELECTRONICS Co.

reserves the right to revise information in this

publication for any reason without prior notice.

SAMSUNG ELECTRONICS Co.

also reserves the right to make changes in equipment

design or components as engineering and manufacturing

may warrant without prior notice .

¨Ï

1998 SAMSUNG ELECTRONICS Co.

in any form or by any means --- graphic, electronic or

mechanical, including recording, taping, photocopying or

information retrieval systems --- without express written

permission of the publisher of this material.

NX-828

ELECTRONIC KEY/HYBRID

TELEPHONE SYSTEM

TECHNICALMANUAL

INCLUDES :

GENERALDESCRIPTIONSECTION

INSTALLATIONSECTION

FEATURESECTION

PROGRAMMINGSECTION

APPENDIXSECTION

BACK-UPDATASHEETS

Every effort has been made to eliminate errors and ambiguities in the information contained

in this manual. Any questions concerning information presented here should be directed

to SAMSUNG ELECTRONICS Co., 9th Fl. Joong-Ang Daily News Bldg. 7, Soonwha-Dong,

Chung-ku, Seoul, Korea C.P.O. Box:2775, Tel: (02)751-6508. SAMSUNG ELECTRONICS

Co. disclaims all liabilities for damages arising from the erroneous interpretation or use of

information presented in this manual.

NX-828 GeneralSystemDiagram.................... 1-1

1.SystemOverview.............................................. 1-2

2.SystemConfiguration ........................................ 1-2

3.HardwareDescription ....................................... 1-3

3.1KeyServiceUnit(KSU)................................... 1-3

3.2Option Cards................................................. 1-3

3.3Station Equipment ........................................... 1-4

4.Specifications................................................... 1-5

4.1ElectricalSpecifications.................................. 1-5

4.2Dimensionsand Weights................................. 1-5

4.3EnvironmentalLimitations................................ 1-5

4.4CableRequirements....................................... 1-5

4.5SystemTonesand Rings................................ 1-6

4.6KeysetLEDIndications................................... 1-7

TABLEOFCONTENTS

GENERAL

DESCRIPTION

NX-828 HYBRID KEY SYSTEM GENERAL DESCRIPTION

1-1

NX-828 GeneralSystemDiagram

COMPUTER

MODEM

EXTERNALMUSIC

SOURCE

EXTERNAL

PAGE

SMDR

PRINTER

DOOR

PHONE

KEYSETAUTO

ATTENDANT

FACSIMILE

STANDARD

PHONE(SLT)

MDF

TRUNK

LINES

PCMMC

AOM

(Add-On-Module)

PSTN

MODEMMODEM

COMPUTER

1.SystemOverview

The NX-828 system is an analogue telephone system designed for small to medium-sized

businesses and for meeting CE (EMC +safety) regulations as well as the related PTT

regulations. The system has amaximum capacity of forty (40) ports, being the sum of telephone

lines and stations-the combinations of which are flexible. Comprising only aKey Service Unit

(KSU), option cards, electronic keysets and conventional single line telephones, the system

offers small or medium-sized business user's the flexibility and control of telephone

communications. Apowerful HM64180R1 microprocessor digitally controls all speech paths and

system functions. The operating program with default memory is stored in non-volatile ROM 27C

020. Customer data is stored in RAM 681000 and is protected by arechargeable Ni-Cd battery

for up to seven day's continuous loss of system power.

2.SystemConfiguration

The basic KSU comes equipped to operate four (4) telephone lines and twelve (12) stations.

Stations from #1 to #4 are assigned to keysets, and stations from #5 to #12 are assigned to

single line telephones. The NX-828 system has several types of option card: the NX-4TRK, NX-

8KLI, NX-8SLI and NX-4OPX card can be installed in any slot of the three expansion slots. By

combining these cards, the system can be increased to its maximum capacity of forty (40) ports.

Optionally, the NX-SMDR/R-MMC and NX-DPH/PAGING cards can be installed on the base

board for value-added features.

The NX-SMDR/R-MMC card is the serial interface card for SMDR and Remote MMC, and the

NX-DPH/PAGING card is the door phone and external paging interface card. The NX-MPD

Hybrid IC (50Hz, 12 or 16KHz) can be installed on the base board and the NX-4TRK option card

for four (4) trunk ports up to amaximum of four per card. The chart below describes

configurations using option cards.

NX-828 HYBRID KEY SYSTEM GENERAL DESCRIPTION

1-2

BaseBoard

BaseBoard and 1 expansion slot

BaseBoard and 2 expansion slots

BaseBoard and 3 expansion slots

12 20 28 36

No.ofStations

You may connect up to 24 keystations to the system. More than 24 KLI connections may cause

problems with system features.

3.HardwareDescription

3.1KeyService Unit (KSU)

The NX-828 system is asingle cabinet, wall mounted, metal-cased unit containing the

following:

¡Ü

PowerSupply

¡Þ System main DC regulator from AC 230V, 50Hz

¡Þ Sinusoidal ring signal generator

¡Þ Battery charging/ Re-charging circuitry

¡Þ DC power regulator for single line telephones

¡Þ +12V DC power regulator and -5V DC power regulator

¡Ü

Connection Board

¡Ü

Base Board

-Four (4) loop start trunk line interface circuitry with Metering Pulse Detectors

(optionally, 50Hz, 12kHz or 16kHz)

-Four (4) keyset interfaces and eight (8) single line telephone interfaces

-16 speech paths

-Internal music source and external music interface

-Two (2) power failure transfers (trunk #1, #2 -station #11, #12)

-Memory back-up battery

-Real-time clock

-Four (4) connectors for Metering Pulse Detectors related to four (4) trunks

-Connector for NX-DPH/PAGING card and NX-SMDR/R-MMC card

-Three (3) expansion slots

-+5V DC power regulator

3.2Option Cards

¡Ü NX-4TRK card provides four (4) loop start trunk interfaces, with Metering pulse Detectors

(optionally, 50Hz, 12KHz or 16KHz).

¡Ü NX-8KLIcard provides eight (8) ports for keysets.

¡Ü NX-8SLIcard provides eight (8) single line telephones indoors.

¡Ü NX-4OPX card provides four (4) line telephones outdoors.

¡Ü NX-SMDR/R-MMCcard provides two serial ports for SMDR and Remote MMC.

¡Ü NX-DPH/PAGINGcard provides two door phone interface and one external paging

interface.

1-3

NX-828 HYBRID KEY SYSTEM GENERAL DESCRIPTION

Andere Handbücher für NX-828

Inhaltsverzeichnis

Andere Samsung Telefonsystem Handbücher

Samsung

Samsung OFFICESERV 500 Series Montageanleitung

Samsung

Samsung iDCS 500 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ ITP-5121D Bedienungsanleitung

Samsung

Samsung OfficeServ 7100 Series Benutzerhandbuch

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung iDCS 100 Bedienungsanleitung

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung Office DECT 8000 Montageanleitung

Samsung

Samsung OfficeServ 7200 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ 12 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ 7400 Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungsanleitung

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung OfficeServ 7400 Bedienungsanleitung

Samsung

Samsung DCS-408 Bedienungsanleitung

Samsung

Samsung iDCS 100 Bedienungsanleitung

Samsung

Samsung OfficeServ 7400 Bedienungsanleitung

Samsung

Samsung DCS-408 Bedienungsanleitung

Samsung

Samsung Office Serv 500 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ 7200 Bedienungsanleitung

Samsung

Samsung iDCS 500 Montageanleitung

Samsung

Samsung OfficeServ 7200 Bedienungs- und Wartungsanleitung

Samsung

Samsung UbiCell Bedienungsanleitung

Samsung

Samsung DCS-816 Bedienungsanleitung

Beliebte Telefonsystem Handbücher anderer Marken

Teleco

Teleco Perfect Voice Tis 16 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

Tynetec

Tynetec Advent xt Bedienungsanleitung

Ericsson

Ericsson DCT1800-S Bedienungsanleitung

NEC

NEC Electra Elite 192 Bedienungsanleitung

Alcatel

Alcatel EASY REFLEXES 4200 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Bticino

Bticino PABX 28D Bedienungsanleitung

NEC

NEC SL 2100 Bedienungsanleitung

Sonifex

Sonifex Phone In 6 Bedienungsanleitung

TransTel Communications

TransTel Communications TD-824i Montageanleitung

Nortel

Nortel BCM50 Produkthandbuch

Panasonic

Panasonic KX-TS25B Bedienungsanleitung

ASCOM

ASCOM TD 92375GB Betriebsanleitung

Karel

Karel MS26S Produktinformationsblatt

EnGenius

EnGenius DuraFon PRO Bedienungsanleitung

Teledat

Teledat X130 DSL Bedienungsanleitung

SpectraLink

SpectraLink MOG400 Bedienungsanleitung