Samsung Version 1.1 Bedienungsanleitung

WEB

TRANSMITTER

SNS-110 Owner's Manual

(Version 1.1)

124

[Power Adapter]

You must use only a compatible power adapter enclosed in SNS-110 package.

[Fuse]

You must use only an identical fuse (250V, T3.15A) used in SNS-110.

[Battery]

You must use only batteries (DC3V) applicable to SNS-110 usage to avoid

explosion risk.

This manual is the basic guide for all Web Transmitter SNS-110 users.

It mainly illustrates product background, installation method, and connection through web browsers

as well as GUI (Graphic User Interface) after connection.

Please, familiarize yourself of the contents in this manual before using SNS-110 product.

Make sure you refer to an expert when opening the outer case for the purpose of repair.

Also, if you have any inquiries or you suspect any damage in the product, please consult to your

local dealer.

Warning

Before You Begin

Regulation Approval

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interface in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient of relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

Chapter 1. SNS-110 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Overview

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Functions and Feature

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Names and Function

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

Chapter 2. Installing SNS-110 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Setting Configuration

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Cautions in Installation

--------------------------------------------11

Unpacking

--------------------------------------------------- 14

Chapter 3. Connecting to Instruments --------------------------------15

Connecting to Camera and Video Image Players

----------------------------15

Connecting to External Instruments

-----------------------------------16

Connecting to Network

-------------------------------------------17

Connecting to Alarm Sensors and External Devices

--------------------------18

Connecting to PAN/TILT/ZOOM/FOCUS Camera Controller

--------------------- 19

Connecting to RS-232C

--------------------------------------------20

Creating RS-232C Cable

------------------------------------------- 21

Terminal Emulation Communication Set-up

-------------------------------- 21

Creating Ethernet Cable

------------------------------------------ 22

Chapter 4. Setting an IP Address -----------------------------------23

Before You Begin

-----------------------------------------------23

Setting in Ethernet

----------------------------------------------24

Setting in Unix

------------------------------------------------26

Setting with IP Installer

------------------------------------ 28

Setting Other Network Information

------------------------------------ 32

Changing IP Address

--------------------------------------------32

In Cable Network through Cable Modem

---------------------------------33

Chapter 5. SNS-110 Log-in ----------------------------------------34

Ideal Specification

----------------------------------------------35

------------------------------------------34

-------------------------------------------35

Chapter 6. Application Mode (Video Image Monitoring Mode) ---------------39

Initial Screen

--------------------------------------------------39

Single Screen

-------------------------------------------------39

Quadruplex Screen

----------------------------------------------40

Automatic Sequential Screen

--------------------------------------- 40

Single Screen with PAN/TILT/ZOOM Controllers

----------------------------41

Table of Contents

Chapter 7. Administration Mode ------------------------------------ 42

Initial Screen

--------------------------------------------------42

Camera Set-up

------------------------------------------------43

PAN/TILT/ZOOM Set-up

------------------------------------------45

Quad/Sequential Set-up

-------------------------------------------46

Web Transmitter Set-up

-------------------------------------------47

Alarm/Relay Set-up

----------------------------------------------50

Network Set-up

------------------------------------------------52

File Transter Set-up

---------------------------------------------55

Custom User Interface Set-up

---------------------------------------57

ABOUT/SUPPORT/HELP

-----------------------------------------58

Appendix A ---------------------------------------------------60

SNS-110 Specifications

-------------------------------------------61

Appendix B ---------------------------------------------------64

Factory Default

------------------------------------------------65

Appendix C ---------------------------------------------------67

How to use Console

---------------------------------------------68

Appendix D ---------------------------------------------------77

Dynamic IP Information Transfer

------------------------------------- 78

Appendix E ---------------------------------------------------84

FAQ

------------------------------------------------------ 85

Chapter 1 SNS-110 Overview

Overview

SNS-110, connected to surveillance cameras or other external devices, compresses video image as

motion JPEG through zip algorithm and transmits it to a remote party through network (Ethernet, cable

modem).

SNS-110 may be connected to maximum of 4 video images and concurrently transmits the image in a

form of single screen, quadruplex screen, or automatic sequential screen.

Also, this system provides remote users in the Internet with alarm processing function and remote control

on PAN/TILT/ZOOM/FOCUS, succeeding in an extensive range of applications.

Functions and Features

●This system transmits real time images at any time with the network (Ethernet, cable modem) present.

●Users in the Internet are not required of additional S/W installation to receive the concurrent video

images, but may Log-in simply by accessing SNS-110 IP address with the existing web browser (such

as Netscape or Explorer).

●Users may select a type of screen, among Single Screen, Quadruplex Screen, and Automatic

Sequential Screen, and also may choose, at his or her preference, transmitting speed and resolution.

"Automatic Sequential" Screen provides the sequential and automatic changes in

size of the input images, depending on how the user has set up.

●This system transmits the image to the registered e-mail address at a particular point of time, by

setting up the alarm.

●Users may conveniently remote-control PAN/TILT/ZOOM/FOCUS under RS485 connection.

●Although the transmitted images are not locked in any way, users may set up ID and access

password.

●This system is usable regardless of the region because the image broadcasting system (NTSC/PAL) is

detected and operated with autornatic recognition.

●Auto terminal resistance function automatically withdraws the terminal resistance of 75Ωwith the video

loop (loop through) connection.

●You can send video image files through FTP server at certain time or in regular intervals. Users can

access the FTP server and search the saved video files.

●You can change the LOGO image on SNS-110 screen, or background color or font colors.

Search SNS-110 to download the latest software at http://www.samsungelectronics.com/

①

Video In

②

Video Out

(Loop Through Out)

③

Control S/W

④

F H (S/W)

⑤

Tx R (S/W)

⑥

Rx R (S/W)

⑦

Network LED

⑧

Power LED

Preset Button

Reset Button

879

5 6

1.CONTROL 2.F/H 3.Tx R 4.Rx R

Names and Function

Familiarize yourself with the names and function of each part on the front and back panels, before

installing SNS-110.

Front View of SNS-110

Receives input from maximum of 4 video image signals.

Transmit the image output to cameras or other external video-imaging devices

❈

When connected, the terminal resistance of 75

Ω

is automatically seized.

Off : when using as console purpose with RS-232C port connected to a PC

On : when RS-232C is to be connected to an External Modem.

❈The current version does not support connecting an External Modem.

Off : use the RS-485 on the reverse side as Half Duplex

On : use the RS-485 on the reverse side as Full Duplex TX mode

Off : Tx Termination resistance 120 Ωoff

On : Tx Termination resistance 120 Ωon

Off : Rx Termination resistance 120 Ωoff

On : Rx Termination resistance 120 Ωon

Blinks when sending or receiving data with the proper connection.

Indicates the power on/off.

Returns to the initial set-up environment of factory default

Restarts SNS-110 without turning off the power.

Name Function

Rear of SNS-110

Connects to maximum of 4 alarm sensors.

Connected to the external device for remote control

Connects to RS-485 cable and remotely regulate

PAN/TILT/ZOOM/FOCUS

controllers.

Full Duplex : use RX and TX.

Half Duplex : use TX .

Connects to console and an external modem through

the RS-232C cable connection.

❈ You are recommended to use the RS-232C

cable packed with this

SNS-110.

❈The current version does not support

connecting an External Modem.

Connects to Ethernet (10BaseT/110BaseT) and cable

modem network.

Supplies the power to SNS-110 with a DC 5V input

terminal

❈Only use the compatible adapter enclosed in

the SNS-110 package and supply DC 5V.

①

Alarm Input(1,2,3,4)

②

R/O (Relay Out)

③

RS-485(+,-)

④

RS-232C

⑤

Network Port

⑥

Power In

Name Function

123456

RS-232C ETHERNET DC 5V

ALARM IN

R/O RX TX

1 2 3 4 - + - +

Sensor Input : 1,2,3,4

Signal GND : G

RX(+,-)

TX(+,-)

9Pin DSub Connector

RJ-45 Connector

Chapter 2 Installing SNS-110

The fluctuation of operation voltage must be within 10% of the regulation

voltage, and the electric outlet must be always grounded. Electric heat

devices, such as, hair dryers, irons, refrigerators, etc., must not be co-used in

the same outlet with SNS-110. AVR is recommended for stable power supply.

Caution

Preparation and installation of SNS-110

Setting Configuration

Please, familiarize yourself of the safe condition of SNS-110 installation.

This product must be horizontally stabilized and not be sloped or vertically positioned. Positioning and

properly centering its wiring room are crucial for its aptitude function. If the devices are too near with each

other, or if the ventilation is not sufficient, it may trigger the system malfunction and make its maintenance

as well as repair difficult to achieve.

The place must be well ventilated and the case cover must be firmly attached together to avoid system

malfunction or system shutdown by external factors. Certain inner parts are extremely susceptible to

abnormal environment, therefore do not open the case.

SNS-110 must be kept in the place with constant temperature and humidity as indicated below.

●Operation Temperature : 0oC ~ 40oC

●Storage Temperature : -20oC ~ 60oC

●Operation Humidity : 20% ~ 85% RH

●Storage Humidity : 20 ~ 85% RH

●Input Voltage: DC 5V

Adapter Input Voltage (AC 110 ~ 240V, 50/60Hz, 0.5A)

Adapter Output Voltage (DC +V, 3A)

●Power Consumption : 12 W or below

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Sender Handbücher

Samsung

Samsung SUT-80 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung