Sangean RCR-4 Bedienungsanleitung
RCR-4
GB
Version 1
1
Important safety instructions
1. Read and understand all safety and operating instructions before
the radio is operated.
2. Retain instruction: The safety and operating instructions should
be retained for future reference.
3. Heed warnings.All warnings on the appliance and operating
instructions should be followed.
4. Follow all operations and use instructions.
5. Water and moisture: The appliance should not be used
near water. Do not use near a bathtub, washbowl, laundry tub,
kitchen sink, wet basement, swimming pool, etc.
6. Unplug the radio from theAC power outlet before cleaning.
Use only a damp cloth for cleaning the exterior of the radio.
7. Do not place the radio on an unstable cart, stand, bracket or
table. The radio may fall, causing serious personal injury and
damage to the radio.
8. Ventilation: This radio should be situated so that its location or
position does not interfere with its proper ventilation.
For example, the radio should not be used on a bed, sofa, rug or
other soft surfaces that may block the ventilation openings.
It should not be placed in a built-in situation like a cabinet that
may reduce air flow through the ventilation openings.
2
GB
9. Power sources: The radio should be operated only from the type
of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
radio dealer or power company.
10. Power cords: The power cord should be positioned so it is not
walked on, pinched, or items placed on top of it. Pay particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the unit. Unplug the power cord by
gripping the power plug, not the cord. Operate the radio using
only the current type of power source indicated. If you are not
sure of the type of power supply to your home, consult your
dealer or local power company.
11. Do not overload wall outlets or extension cords. This can result
in a risk of fire or electrical shock. Never insert objects of any
kind into the radio through opening. The objects may touch
dangerous voltage points or short out parts. This could cause
a fire or electrical shock.
12. If the radio is left attended and unused for long periods of time,
unplug it form the wall outlet. This will prevent damage caused
by lightning or power line surges.
13. If the radio is left unattended and unused for a long period
of time, remove the batteries. The batteries may leak and
damage furniture of your radio.
3
14. Do not attempt to service the receiver yourself. Removing the
cover may expose you to dangerous voltage, and will void the
warranty. Refer all servicing to authorized service personnel.
15. Object and Liquid Entry-Never push objects of any kind into this
radio through opening as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind of product.
16. The appliance should be serviced by qualified service
personnel when:
The power supply cord or the plug has been damaged.
Objects have fallen or liquid had been spilled into the radio.
The radio has been exposed to rain or water.
The radio does not appear to operate normally or exhibits a
marked change in performance.
The radio has been dropped, or the enclosure damaged.
A.
B.
C.
D.
E.
4
GB
Controls
Power key
RADIO key
CD/USB/SD key
NAP key
ALARM key
EJECT key
Presets and CD/USB/SD
music playing control keys
Time/Date keys
Tone control key
Tuning Up andDown keys
Set key
Mode key
Info key
Snooze key
1
2
3
4
5
6
7
8
9
10
11
12
13
14
5
CD indicator
Alarm indicators
CD slot
Display
Clock
15
16
17
18
19
6
GB
Display backlight adjustment
DCF (Auto Time setting) switch
Time zone switch
20
21
22
7
Volume control
Earphone jack
23
24
8
GB
Antenna
Line out jack
AUX In jack
Power connector
25
26
27
28
9
Operation
Power on
Connect the plug to a wall socket, then the clock shows 00:00.
And the display shows “Clock not set”.
Set TIME ZONE switch (on the bottom of the radio) to 0 position
for regular case.
Clock setting
Clock Auto Setting
1. Switch on the DCF switch on the bottom of the radio to On in the
area where provide the Radio Controlled Time service.
2. The clock time will automatically set up. Auto time set up takes
about 15 minutes.
3. When ClockAuto Setting is operating, the LCD shows the
signal strength.
When it is under “Clock not set”, the Clock Auto Setting
operates once an hour. When the clock is automatically set,
the Clock Auto Setting operates once every other hour.
Touch TIME/DATE key for more than 2 seconds to activate the
ClockAuto Setting (When DCF is on and under standby mode).
When it is under the ClockAuto Setting, touch the
TIME/DATE key for more than 2 seconds to deactivate it.
Inhaltsverzeichnis
Andere Sangean Radiowecker Handbücher
Sangean
Sangean RCR-22 Bedienungsanleitung
Sangean
Sangean Sangean RCR-5 Bedienungsanleitung
Sangean
Sangean RCR-2 Bedienungsanleitung
Sangean
Sangean RS-330 Bedienungsanleitung
Sangean
Sangean RCR-10 Bedienungsanleitung
Sangean
Sangean DCR-90BT Bedienungsanleitung
Sangean
Sangean RCR-29 Bedienungsanleitung
Sangean
Sangean RCR-22 Bedienungsanleitung
Sangean
Sangean DCR-9 Bedienungsanleitung
Sangean
Sangean RCR-40 Bedienungsanleitung
Sangean
Sangean RCR-10 Bedienungsanleitung
Sangean
Sangean RCR-22 Bedienungsanleitung
Sangean
Sangean RCR-22 Bedienungsanleitung
Sangean
Sangean Sangean RCR-5 Bedienungsanleitung
Sangean
Sangean RCR-22 Bedienungsanleitung
Sangean
Sangean RCR-11 WF Bedienungsanleitung
Sangean
Sangean RCR-24 Bedienungsanleitung
Sangean
Sangean RCR-1 Bedienungsanleitung
Sangean
Sangean UCR-100 Bedienungsanleitung
Sangean
Sangean Sangean- RCR-3 Bedienungsanleitung
