Sangean RCR-22 Bedienungsanleitung

RCR-22

Version 1

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit

into your outlet. Consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

Important safety instructions

10.

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod, bracket, or table specied

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused

for long periods of time.

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged. liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

To Reduce the Risk of Fire or Electric Shock, Do not Expose

This Appliance To Rain or Moisture.

The Shock Hazard Marking and Associated Graphical Symbol

is provided on the rear of unit.

11.

12.

13.

14.

15.

16.

Apparatus shall not be exposed to dripping or splashing and no

objects lled with liquids, shall be placed on the apparatus.

Excessive sound pressure on ear- and headphones could

impair the hearing ability. Higher setting that idle on the

equalizer leads to higher signal voltages on the output for ear

and headphones.

The power plug should be close to the radio, and easy to be

approached that during the emergency, to disconnect the power

from the radio, just unplug the power plug from the AC power

slot.

Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnected device shall remain readily

operable.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements,

no change to the antenna or the device is permitted. Any

change to the antenna or the device could result in the device

exceeding the RF exposure requirements and void user’s

authority to operate the device.

17.

18.

19.

20.

Controls

Menu button

Preset button

Tuning up / down button / Snooze button

Band / Select button

Time capsule

Date button

Time button

Alarm 2 button

Alarm 1 button

Display

Power button / Sleep button

Nap button

Info button

Light button

Reset button

Light level control

Aux in socket

Headphone socket

LCD display

Time and frequency indicator

Radio-controlled time signal

RDS indicator

Sleep / Snooze indicator

Nap indicator

Alarm 1 with buzzer alarm indicator

Alarm 1 with radio alarm indicator

Alarm 2 with buzzer alarm indicator

Alarm 2 with radio alarm indicator

FM stereo indicator

Signal level indicator

Using the clock radio for the rst time

1. Place your clock radio on a at surface.

2. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is straight as possible extending

either above or below the radio.

3. Insert the adaptor plug into the AC socket located on the rear of

your clock radio. The display will show "time zone" for a few

seconds and then the display will ask you to set your time zone.

To set the time zone, press the Tuning up/down button and the

Select button to conrm. Your clock radio will show _ _: _ _ on the

display and the indicator will ash. The radio will scan for signal

and if a signal is found and received completely it will then show

on the screen without ashing. Now the radio will show the

current time.

4. If no signals are found, will be ashing on the display. It may

be necessary to relocate your clock radio to a position giving better

reception.

IMPORTANT:

The mains adaptor is used as the means of connecting the clock

radio to the mains supply. The mains socket used for the clock

radio must remain accessible during normal use. In order to

disconnect the radio from the mains completely, the mains adaptor

should be removed from the mains socket outlet completely.

Characters appearing on the LCD display indicates the clock radio

is connected to and powered from the mains supply.

Clock

Manual clock setting (only if automatic setting fails)

1. Press and hold the Time button to enter the clock setting, and

the hour digits will ash on the display.

2. Press the Tuning up or down button to adjust the hours. Then

press the Band/Select button to conrm the setting. The minute

digits will ash on the display.

3. Press the Tuning up or down button to adjust the minutes. Then

press the Band/Select button to confirm the setting. Now the

clock setting is completed.

Manual date setting (only if automatic setting fails)

1. Press and hold the Date button to enter the date setting and then

the year digits will ash.

2. Press the Tuning up or down button to adjust the year. Then

press the Band/Select button to conrm the setting. The month

digits will ash.

3. Press the Tuning up or down to adjust he month. Then press the

Band/Select button to conrm the setting. The date digits will ash.

4. Press the Tuning up or down button to adjust the date. Then

press the Band/Select button to conrm the setting. Now the time

setting is completed.

Change 12/24 hour clock format

1. Press the Menu button to enter the setting.

2. Press the Tuning up or down button until ‘CLOCK 24H’ is highlighted

on the display. Press the Band/Select button to enter the setting.

3. Press the Tuning up or down button to choose 12/24 hour clock

format. Press Band/Select button to conrm the setting.

Change date format

1. Press the Menu button to enter the setting.

2. Press the Tuning up or down until date format is highlighted on

the display. Press the Band/Select/button to enter the setting.

3. Press the Tuning up/down button to choose your desired format.

Press Band/Select button to conrm the setting.

D.S.T. (Daylight Saving Time)

1. Press the Menu button to enter the menu setting.

2. Press the Tuning up or down button until ‘DST OFF’ is appeared

on the display. Press the Band/Select button to enter the setting.

3. Press the Tuning up or down button to choose ‘+1H’ (activated

D.S.T.) or ‘OFF’. Then press the Band/Select button to conrm

the setting.

Andere Handbücher für RCR-22

Inhaltsverzeichnis

Andere Sangean Radiowecker Handbücher

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean PS-300 Bedienungsanleitung

Sangean

Sangean RCR-4 Bedienungsanleitung

Sangean

Sangean RCR-2 Betriebsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean Sangean RCR-5 Betriebsanleitung

Sangean

Sangean Sangean RCR-5 Bedienungsanleitung

Sangean

Sangean RCR-40 Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Sangean

Sangean RCR-1 Bedienungsanleitung

Sangean

Sangean DCR-9 Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Sangean

Sangean RCR-10 Bedienungsanleitung

Sangean

Sangean RS-332 Bedienungsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean RCR-5BK Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Sangean

Sangean RCR-1 Bedienungsanleitung

Sangean

Sangean RCR-9 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RCR-24 Bedienungsanleitung

Sangean

Sangean RCR-40 Bedienungsanleitung

Sangean

Sangean RCR-29 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung