Sangean Sangean- RCR-3 Bedienungsanleitung

381Q901-A

RCR-3

Operating instruction

Mode d’emploi

Instruccions de manejo

Gebruiksaanwijzing

Bedienungsanleitung

AM/FM 2 bands Digital

Clock Radio

Radio réveil avec tuner

digital AM/FM

Radio RelojDigital de

2 bandas AM/FM

Digitale Wekkerradio met

AM/FM

MW/UKW 2-Band-

Digital-Radiouhr

Important safety instructions

1. Read and understand all safety and operating instructions before

the radio is operated.

2. Retain instruction: The safety and operating instructions should

be retained for future reference.

3. Heed warnings.All warnings on the appliance and operating

instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used near

water. Do not use near a bathtub, washbowl, laundry tub,

kitchen sink, wet basement, swimming pool, etc.

6. Unplug the radio from theAC power outlet before cleaning.

Use only a damp cloth for cleaning the exterior of the radio.

7. Do not place the radio on an unstable cart, stand, bracket or

table. The radio may fall, causing serious personal injury and

damage to the radio.

8. Ventilation: This radio should be situated so that its location

or position does not interfere with its proper ventilation.

For example, the radio should not be used on a bed, sofa, rug or

other soft surfaces that may block the ventilation openings.

It should not be placed in a built-in situation like a cabinet that

may reduce air flow through the ventilation openings.

9. Power sources: The radio should be operated only from the type

of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your

radio dealer or power company.

10. Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not

sure of the type of power supply to your home, consult your

dealer or local power company.

11. Do not overload wall outlets or extension cords. This can result

in a risk of fire or electrical shock. Never insert objects of any

kind into the radio through opening. The objects may touch

dangerous voltage points or short out parts. This could cause

a fire or electrical shock.

12. If the radio is left attended and unused for long periods of time,

unplug it form the wall outlet. This will prevent damage caused

by lightning or power line surges.

13. If the radio is left unattended and unused for a long period of

time, remove the batteries. The batteries may leak and damage

furniture of your radio.

14. Do not attempt to service the receiver yourself. Removing the

cover may expose you to dangerous voltage, and will void the

warranty. Refer all servicing to authorized service personnel.

15. Object and Liquid Entry-Never push objects of any kind into this

radio through opening as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind of product.

16. The appliance should be serviced by qualified service personnel

when:

The power supply cord or the plug has been damaged.

Objects have fallen or liquid had been spilled into the radio.

The radio has been exposed to rain or water.

The radio does not appear to operate normally or exhibits a

marked change in performance.

The radio has been dropped, or the enclosure damaged.

Controls

Power button and Sleep timer

Alarm 2 button

Alarm 4 button

Light button

Time set button

Date set button

Alarm 1 button

Alarm 3 button

Nap button

Tuning Up/Down and Snooze button

SET and Light Saving Time button

Station presets

FM/AM/AUX band selection

Clock

LCD display

Headphones socket

Volume control

Tone control

Light level control

Alarm sound level control

Time zone switch

Reset

AUX-IN

Power In

LCD display

Radio band and clock AM/PM display

Time indicator/Frequency

Auto tuning indicator

Memory and seconds indicator

Daylight Saving Time indicator

Time set indicator

Nap indicator

Sleep indicator and Snooze indicator

Radio controlled time signal

Minute indicator

Alarm AM/PM indicator

Date indicator

Day of week indicator

Month/Date/Year/alarm time indicator

Alarm indicator

Operation

Power On

Automatic radio station presetting and clock setting

1. Connect the plug to a wall socket at the first time, the radio will

automatically presetAM and FM stations. 7 highest frequency

stations from both AM and FM.

2. Then your clock radio will display -:- and the indicator will

flash on the display. The time will be set if the auto time set

service is available.

3. When the radio is off, press and hold Time button for more

than 4 seconds to receiveAuto Time Set signal.

Clock

Manual clock setting (only if automatic setting fails)

1. Press the TIME button, and the display will show .

2. Press the SET button, and the hour digits will flash on

the display.

3. Press the TUNING up or down button to adjust the hours.

4. Then press the SET button, and the minute digits will flash on

the display.

5. Press the TUNING up or down button to adjust the minutes.

6. Press SET button to complete the time setting.

* You can also stop the process and save the setting anytime

by pressing TIME button.

Manual date setting (only if automatic setting fails)

1. Press theDATE button then press SET button, the year digits

will flash.

2. Press the TUNING up or down button to adjust the year.

3. Press the SET button again and the month digits will flash.

4. Press the TUNING up or down button to adjust the month.

5. Press the SET button again and the date digits will flash.

6. Press the TUNING up or down button to adjust the date.

7. Preset SET button to complete the time setting.

* You can also stop the process and save the setting anytime by

pressing DATE button.

Change 12/24 hour clock format

1. Press TIME button, and then press SET button.

2. To set 12 hour clock format, press Station preset 1, or, to set

24 hours clock format, press Station preset 2.

3. Press TIME button to finish the setting.

D.S.T. (Daylight Saving Time)

1. When the display shows the time, press the SET button for more

than 4 seconds to set the clock 1 hour faster, and the display

will show .

2. To set the clock back from D.S.T., press the SET button for

more than 4 seconds, the symbol will disappear.

Radio operation

Tuning into radio stations

There are 3 ways of tuning your radio:

A. Manual tuning

1. Press the Power button to turn on your radio.

2. Press the BAND button repeatedly to select AM (MW) or

FM waveband.

3. Press the TUNING up or down button to change the frequency.

4. Press the Power button again to turn off your radio.

B. Scan tuning

1. Press the Power button to turn on your radio.

2. Press the BAND button repeatedly to select AM (MW) or

FM waveband.

3. Press the TUNING up or down button for more 0.5 second

and release, it will tune into the next frequency with reception.

4. Press the Power button again to turn off your radio.

C. Presetting and recalling stations

Presetting stations:

1. Press the Power button to turn on your radio.

2. Press the BAND button repeatedly to select AM (MW) or

FM waveband.

3. Tune into the station that you would like to preset.

4. There are 7 preset buttons from 1 to 7. Press 1 of them and

hold for more than 2 seconds until the radio beeps, and the

station frequency will be saved into the chosen preset.

5. Repeat the procedure for the remaining presets. Your radio has

7 presets for each AM and FM.

6. The preset can be overwritten by following the above procedure.

Recalling stations:

1. Press the BAND button for AM or FM.

2. Simply press 1 of the PRESET buttons (from 1 to 7) you would

like to tune into. And the preset number and frequency will

appear on the display.

Alarm operation

There are 4 alarms which can be set independently. Alarm 1 and

Alarm 2 can be set to wake you by buzzer, andAlarm 3 and Alarm

4 can be set with radio alarm. When the alarm light is on, it means

the indicated alarm will active in 24 hours.

How to set Buzzer Alarm (Alarm 1 and Alarm 2)

The buzzer beep increases in volume every 15 seconds. It beeps

1 minute, followed by 1 minute silence and repeat the cycle.

The buzzer will beep for 1 hour, or stop by pressing the

Power button.

The buzzer alarm volume may be adjusted through theAlarm sound

level control button on the bottom of the radio.

1. Press theAlarm 1 (orAlarm 2) button and Alarm 1 time

(or Alarm 2) time will show on the display.

2. Press the SET button, the alarm hour will show on the display.

3. Press TUNING up or down button to adjust the hour.

4. Press the SET button again and adjust the minute by pressing

TUNING up or down button.

5. Select required days of week on which the alarm will beep by

pressing day of week buttons. (press the day buttons again to

deactivate the days)

6. Press the SET button again and press TUNINGup or down

button until the mark or is shown.

7. Press the SET button to complete the setting.

8. When it is buzzing, the or mark is blinking.

Press the Power button to stop the buzzer. And the or

mark will stop blinking.

* You can press the Alarm 1(or Alarm 2) button anytime to complete

the setting.

Andere Handbücher für Sangean- RCR-3

Inhaltsverzeichnis

Sprachen:

Andere Sangean Radiowecker Handbücher

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean RCR-2 Bedienungsanleitung

Sangean

Sangean RCR-1 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RCR-29 Bedienungsanleitung

Sangean

Sangean RCR-30 Bedienungsanleitung

Sangean

Sangean RCR-40 Bedienungsanleitung

Sangean

Sangean RCR-10 Bedienungsanleitung

Sangean

Sangean RCR-1 Bedienungsanleitung

Sangean

Sangean RCR-1 Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Sangean

Sangean RS-332 Bedienungsanleitung

Sangean

Sangean RS-332 Bedienungsanleitung

Sangean

Sangean RCR-10 Bedienungsanleitung

Sangean

Sangean RCR-2 Betriebsanleitung

Sangean

Sangean RCR-28 Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RCR-4 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung