Sangean Sangean RCR-5 Bedienungsanleitung

381R801-A

RCR-5

Operating instruction

Mode d’emploi

Instruccions de manejo

Gebruiksaanwijzing

Bedienungsanleitung

MW/FM 2 bands Digital

Clock Radio

radio réveil numérique

2 bandes MW/FM

radio reloj digital de

2 bandas MW/FM

AM/FM 2 bandsDigitale

Wekkerradio

MW/UKW 2-Band-

Digital-Radiouhr

Important safety instructions

1. Read and understand all safety and operating instructions

before the radio is operated.

2. Retain instruction: The safety and operating instructions should

be retained for future reference.

3. Heed warnings.All warnings on the appliance and operating

instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used

near water.Do not use near a bathtub, washbowl, laundry tub,

kitchen sink, wet basement, swimming pool, etc.

6. Unplug the radio from theAC power outlet before cleaning.

Use only a damp cloth for cleaning the exterior of the radio.

7. Do not place the radio on an unstable cart, stand, bracket or

table. The radio may fall, causing serious personal injury and

damage to the radio.

8. Ventilation: This radio should be situated so that its location or

position does not interfere with its proper ventilation.

For example, the radio should not be used on a bed, sofa, rug or

other soft surfaces that may block the ventilation openings.

It should not be placed in a built-in situation like a cabinet that

may reduce air flow through the ventilation openings.

9. Power sources: The radio should be operated only from the type

of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your

radio dealer or power company.

10. Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not

sure of the type of power supply to your home, consult your

dealer or local power company.

11. Do not overload wall outlets or extension cords. This can result

in a risk of fire or electrical shock. Never insert objects of any

kind into the radio through opening. The objects may touch

dangerous voltage points or short out parts. This could cause

a fire or electrical shock.

12. If the radio is left attended and unused for long periods of time,

unplug it form the wall outlet. This will prevent damage caused

by lightning or power line surges.

13. If the radio is left unattended and unused for a long period

of time, remove the batteries. The batteries may leak and

damage furniture of your radio.

14. Do not attempt to service the receiver yourself. Removing the

cover may expose you to dangerous voltage, and will void the

warranty. Refer all servicing to authorized service personnel.

15. Object and Liquid Entry-Never push objects of any kind into this

radio through opening as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind of product.

16. The appliance should be serviced by qualified service

personnel when:

The power supply cord or the plug has been damaged.

Objects have fallen or liquid had been spilled into the radio.

The radio has been exposed to rain or water.

The radio does not appear to operate normally or exhibits a

marked change in performance.

The radio has been dropped, or the enclosure damaged.

Controls

Power on/off and Sleep Timer button

BAND button

NAP TIMER button

STATION PRESETS

TUNINGUp/Down and Snooze

TIME SET/DISPLAY button

Alarm 2 button

Alarm 1 button

LCDDisplay

Volume Control knob

Headphones socket

AUX in

Display Backlight Adjustment button

Logo and specification mark

FM antenna

Power socket

LCD display

Radio band and a.m./p.m. display

Hour and minute digits

Second digits

Alarm indicators

Sleep timer

Nap timer

Week day

Clock set

Operation

Clock Setting (date and time)

Clock time has to be set before alarm setting.

1. Press and hold the TIME SET button for more than 2 seconds,

the display will show , and flash the year digits.

2. Press TUNING Up/Down button to set the year.

3. Press the TIME SET button, then use the same way to set

the date.

* press and hold the TUNING Up/Down button for fast-forward

or fast-backward.

4. Press the TIME SET button to set the hour with TUNING

Up/Down button. Same way (press TIME SET then TUNING

Up/Down ) to the minute. The day of week is automatically set.

5. After the minute is set, then press the TIME SET button to

complete the setting.

While setting, the setting will be cancelled after 30 seconds

without pressing any buttons.

After the time is under setting, the setting won’t be cancelled

even you don’t press any button for more than 30 seconds.

You need to press the TIME SET button to complete the

setting, and the second digit will be set to 0 at the moment

when you press the TIME SET button.

Radio operation

Turn on the radio with the POWER button.

Tune into desired stations

Station selection

1. Press the TUNING up/down button, to tune into the frequency

of your desired stations

2. Scanning tuning- Press and hold the TUNINGup/down button for

more than 0.5 seconds and release, the radio will search for the

next station.

STATION PRESETS

1. Tune into the stations that you would like to store.

2. Select a STATIONPRESET button (1-5) and press it for

more than 2 seconds until a beep sounds and the station is

now stored.

Note:

When you store a new station in a preset, the station previously

stored will be automatically erased.

Recall the station memories

To recall the station memories, simply press the BANDbutton

to select the required bands and press the required STATION

PRESET (1-5 ).

Volume

Turn the VOLUME knob to adjust the volume.

Alarm Clock

Alarm setting can be done while the power is during ON or

OFF position.

The alarm clock is equipped with two alarm systems which can be

operated independently of each other.

There are 2 kinds of alarm sounding, sound- buzzer and radio

1. Select alarm system 1 or 2 by pressing the ALARM 1 or

ALARM 2 button.Display will show the selected alarm

system symbol, or .

2. Before the display goes back to the clock, press TIME SET

button for 2 second until you hear the beep. The display will blink

the hour. Press the TUNING up/down button to set the hour.

3. Press the TIME SET button and the display will flash the minute

digit. Press the TUNING up/down button to set the minute.

4. Press the TIME SET button and then press the TUNING

up/down button to select if the alarm should work on daily,

weekday (Monday to Friday), weekend (Saturday and Sunday),

or only once. 4 options.

5. Press the TIME SET button and then press the TUNING

up/down button to select the alarm sound. There are

RADIO ALARM , and BUZZER ALARM , 2 options.

a. If the BUZZER ALARM is selected – press the TIME SET

button to complete the setting.

b. If the RADIO ALARM is selected – press the TIME SET

button and then select the radio band and the frequency to

choose the alarm radio station. Then press the TIME SET

button to complete the setting.

c. The setting will automatically complete the setting after

30 seconds without any button pressed. But when the

ALARM RADIO is under setting, it will not complete

automatically until the TIME SET of POWER button

is pressed.

6. After the alarm is set, the alarm status will be shown for

6 seconds then will go back to the clock.

* HWS(Human Wake System): In buzzer alarm mode, the buzzer

sound will increase in volume for 1 minute, then followed by

1 minute silence, then repeat the cycle for 1 hour.

Deactivate alarm setting

Press theALARM 1 or ALARM 2 button for 2 seconds until you

hear the beep. The alarm symbol will show . And the alarm will be

deactivated. To reactivate the alarm, press the ALARM 1 or

ALARM 2 button for 2 seconds until you hear the beep.

Stop the alarm signal

To stop the alarm sounding , press the POWER button.

Snooze

To interrupt the sounding alarm ( radio or beep tone), press the

SNOOZE button. The alarm stops and begins again with interval

of 5 minutes. The alarm will continue for an hour whatever

being interrupted.

Nap timer

With the NAP button, you can select the period for the short term

alarm in 10 minutes steps from 10-120 minutes.

The Nap timer starts when you release the key.NAP will appear on

display. The alarm signal sounds after the period of time which you

have set.

If you wish to turn off theNap timer before the time is up,

simply adjust the number of minutes by pressingNAP button to

OFF and release. NAP will disappear from display.

Andere Handbücher für Sangean RCR-5

Inhaltsverzeichnis

Andere Sangean Radiowecker Handbücher

Sangean

Sangean K-200 Bedienungsanleitung

Sangean

Sangean RCR-24 Bedienungsanleitung

Sangean

Sangean RCR-40 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean PS-300 Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean RS-332 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean RS-332 Bedienungsanleitung

Sangean

Sangean DCR-90BT Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean RCR-28 Bedienungsanleitung

Sangean

Sangean Sangean RCR-5 Bedienungsanleitung

Sangean

Sangean RCR-4 Bedienungsanleitung

Sangean

Sangean RCR-22 Bedienungsanleitung

Sangean

Sangean UCR-100 Bedienungsanleitung

Sangean

Sangean RCR-29 Bedienungsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean ProTravel PT-50 Bedienungsanleitung

Sangean

Sangean RCR-30 Bedienungsanleitung

Sangean

Sangean RS-330 Bedienungsanleitung

Sangean

Sangean RCR-8WF Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung