5
Introduction
1.3 Care
The unit should not be operated in any of the following circumstances:
If water or other liquid is spilled on the unit.
When the unit is exposed to moisture.
When the unit is cleaned or moved.
If damage is found to the main cord.
When the unit condenses.
Pay attention to the following guidelines for safe, trouble-free operation:
Do not place in direct sunlight.
Do not place in an environment with high temperature and high humidity.
Do not place in an environment with dust, dirt, salt, or corrosive gas.
Do not place in an area subject to large vibrations.
Do not place in an area subject to noise by electric field, magnetic field, etc.
Do not place in an area where the unit is subject to falling objects.
Do not place in an area with possible exposure to water.
General usage guidelines:
All electrical interfaces have to be connected without applied voltage.
It is required to boot up the instrumentAFTER connecting all devices, even if the DVI
output instrument is available.
Do not touch the surface of the display because the LCD has the potential of damage
by static electricity.
If you plan to illuminate the SLM with high power light or shorter wavelength light like
ultraviolet, please consult the santec service site.
If you handle the LCOS unit, please wear a wristband for ESD on a earth grounded
table as shown in figure 2.
