Sanyo VCB-7312P Bedienungsanleitung

INSTRUCTION MANUAL

B/W CCD Camera

VCB-7312P

About this manual

•Before installing and using the camera, please

read this manual carefully. Be sure to keep it

handy for later reference.

L73J2/XE GB 1997, 1, 8

Depending on the conditions of use,

installation and environment, please be

sure to make the appropriate settings and

adjustments. If you need help with

installation and/or settings, please consult

your dealer.

CONTENTS

PRECAUTIONS...................................................2

PARTS NAMES...................................................3

POWER SOURCE................................................4

CONNECTIONS..................................................5

SETTINGS...........................................................6

LENS ADJUSTMENTS ........................................6

TROUBLESHOOTING.........................................7

SPECIFICATIONS ...............................................8

ACCESSORIES

1AC adaptor...................................... pc.

2AC adaptor mounting plate ............ pc.

: With 3 fixing screws

FEATURES

•Built-in interline transfer method /3"

CCD, approx. 320,000 picture elements

•Low smear, anti-blooming, low lag, no

burning and no geometric distortion

using the CCD solid state image device.

•00% solid state components giving

excellent immunity to shock and

vibration

•Not subject to interference from

magnetic or electrostatic fields

•High sensitivity, minimum required

illumination of 0.3 lux with F2.0 lens

•Horizontal resolution, more than 400 TV

lines

•New backlight compensation function

(Active when using an auto-iris lens)

•Low power consumption and quick start

•Power supply: 2 V DC operation

(supplied AC adaptor)

•Built in Vari-focal (f=2.6 ~ 5.6 mm) auto

iris lens.

L73J2/XE GB 997, , 8

English 1

PRECAUTIONS

In case of problem

Do not use the camera if smoke or a

strange odour comes from the unit, or if it

seems not to function correctly. Disconnect

the power cord immediately, and consult

your dealer (or a Sanyo Authorized Service

Centre).

Do not open or modify

Do not open the cabinet, as it may be

dangerous and cause damage to the unit.

For internal settings and repairs, consult

your dealer (or a Sanyo Authorized Service

Centre).

Do not put ob ects inside the unit

Make sure that no metal objects or

flammable substance get inside the camera.

If used with a foreign object inside, it could

cause a fire, short-circuits or damages.

If water or a liquid gets inside the camera,

disconnect the power cord immediately,

and consult your dealer (or a Sanyo

Authorized Service Centre). Be careful to

protect the camera from rain, sea water,

etc.

Be careful when handling the unit

To prevent damages, do not drop the

camera or subject it to strong shock or

vibration.

Install away from electric or

magnetic fields

If installed close to a TV, radio transmitter,

magnet, electric motor, transformer, audio

speakers the magnetic field they generate

will distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not

install it where there is greasy smoke or

steam, where the dampness may get too

high, or where there is a lot of dust.

Protect from high temperatures

Do not install close to stoves, or other heat

generating devices, such as spotlights, etc.,

or where it could be subject to direct

sunlight, as that could cause deformation,

discoloration or other damages.

Be careful when installing close to the

ceiling, in a kitchen or boiler room, as the

temperature may raise to high levels.

Install where the temperature range will

stay between – 0˚C and 50˚C.

(no condensation)

Cleaning

•Dirt can be removed from the cabinet

by wiping it with a soft cloth. To

remove stains, wipe with a soft cloth

moistened with a soft detergent

solution and wrung dry, then wipe dry

with dry soft cloth.

•Do not use benzine, thinner or other

chemical product on the cabinet, as that

may cause deformation and paint

peeling. Before using a chemical cloth,

make sure to read all accompanying

instructions. Make sure that no plastic

or rubber material comes in contact

with the cabinet for a long period of

time, as that may cause damage or

paint peeling.

ENGLISH

L73J2/XE GB 997, , 8

2 English

PARTS NAMES

1Video output connector (VIDEO OUT: BNC type)

Connect this connector to a device such as a VCR or monitor

with a VIDEO IN connector.

212 V DC input terminal (12 V DC IN)

Connect DC connecting cord from the AC adaptor to the

2 V DC IN terminal on the camera.

3External sync composite video signal input connector

(VS IN: BNC type)

Connect to this connector the synchronizing signal output

from a synchronizing signal device or the composite signal of

a video distributor.

4Power indicator (POWER)

Comes on when the power to the camera is on.

5Lens cover

This cover must be removed when adjusting the zoom

and/or the focus. (Refer to “LENS ADJUSTMENTS”.)

6Focus ring

Loosen the knob on the focus ring then adjust it as required.

When finished, tighten the knob.

7Zoom ring

Loosen the knob on the zoom ring then adjust it as required.

When finished, tighten the knob.

8Camera installation bracket

The bracket can be fixed at the top or bottom of the

camera. When fixing the bracket, be sure to use the longer

screws and install the shorter screws on the opposite side to

seal the openings.

CAUTION:

When installing the camera support, select a location

that can support the total weight of the camera and

accessories.

1232

1Shorter screws: M3 x 4

2Longer screws: M3 x 6

3Camera mounting

screw hole:

1/4"-20 UNC

L73J2/XE GB 997, , 8

English 3

VIDEO

A. I.

LENS

VR401

OFF

BLC

9Camera setup section (under the cover)

This unit factory settings are as indicated below. However, if

due to installation conditions or environment the settings

may need to be modified for best results (see "SETTINGS").

To access the controls, remove the cover fixing screw, then

remove the cover.

Control name Position

aBacklight compensation

switch (BLC) OFF

bLens iris level volume

(LEVEL) about centre

POWER SOURCE

Connect DC connecting cord from the AC adaptor to the

12V DC IN terminal on the camera.

Then, plug the AC adaptor into an AC outlet.

WARNING:

•This AC adaptor is specially conceived for this camera.

Never use another type of AC adaptor with this

camera, and do not use this AC adaptor to power

other types of cameras.

•Not for use with toys.

•Never try to disassemble or modify the AC adaptor.

L73J2/XE GB 997, , 8

4 English

CONNECTIONS

Bas c connect on for mon tor ng or record ng

The peripheral devices (VCR, monitor, lens, etc.) and

cables are sold separately.

Make the video signal connection between the camera and

the monitor or time lapse VCR.

Turn on the power of all the devices connected to the

camera.

When the power is connected to the camera, the POWER

indicator (A) will light. Adjust the picture on the monitor

using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG- U (7C-2V), 600 m maximum.

CAUTION:

•The RG-59U type cable should not be run through

electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

(A)

(Video signal connections)

: VIDEO IN

: VIDEO OUT

L73J2/XE GB 997, , 8

English 5

SETTINGS

Backlight compensation setting

Set the BLC switch to the ON position, to engage the backlight

compensation function.

Note:

You will need to set the LEVEL (VR40 ) volume when shooting in

the conditions described below.

L (counterclockwise): To decrease the contrast

H (clockwise): To increase the contrast

•If shooting simultaneously in a dark room and through a bright

window.

•If the subject background is extremely bright or dark.

•If the brightness of the picture on the monitor is not correct.

VIDEO

A. I.

LENS

VR401

OFF

BLC

OFF

BLC

VR401

LENS ADJUSTMENTS

After having installed the camera, adjust the lens zoom and

focus while looking at the image on the monitor screen.

1Remove the lens cover by turning then pulling it as

illustrated.

2Loosen the knob on the zoom ring then adjust it as

required by turning it towards T (zoom-in) or W

(zoom-out).

3Loosen the knob on the focus ring then adjust it until the

image is clear by turning it towards N (near) or ∞

(infinity).

When the lens is properly adjusted, tighten the knob on

the zoom ring and the focus ring, then install the lens

cover to protect it.

L73J2/XE GB 997, , 8

6 English

TROUBLESHOOTING

Before taking the camera for repairs, please check below to make sure that the camera is

used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo

Authorized Service Centre.

No picture on the monitor screen

•Is the power turned on to all connected devices? Is the voltage correct?

•Are all the signal connecting cables correctly connected?

•Is the lighting sufficient?

The picture is not clear

•Is the monitor correctly adjusted?

•Is the lens focus correctly adjusted?

•Are the lens surfaces clean?

If there is dust or finger prints on the lens, the image quality will deteriorate. To clean the

lens use a soft cloth or a commercially available lens cleaning set.

SERVICE

This camera is a precision instruments and if treated with care, will provide years of

satisfactory performance. However, in the event of a problem, the owner is advised not to

attempt to make repairs or open the cabinet. Servicing should always be referred to your

dealer or Sanyo Authorized Service Centre.

L73J2/XE GB 997, , 8

English 7

SPECIFICATIONS

Camera:

Scanning system : CCIR standard (625 TV lines, 25 frames/sec.)

Interlace : PLL 2: interlace

Image device : /3 inch solid state image device CCD

Picture elements : 542 (H) x 584 (V)

Effective picture elements : 5 2 (H) x 582 (V)

Synchronizing system : Internal sync/External sync (Automatic switching)

Resolution : 400 TV lines horizontally, 400 TV lines vertically

Video output level : .0 Vp-p/75 ohms, composite

Video S/N ratio : More than 50 dB

Lens : F 2.0 ~ 2.7

Vari-focal lens : f = 2.6 ~ 5.6

Horizontal: Approx. 03˚ ~ 5 ˚

Vertical: Approx. 77˚ ~ 38˚

Diagonal: Approx. 28˚ ~ 64˚

Minimum required illumination

(incandescent lighting) :Scene: 0.3 lux, Image element: 0.0 6 lux

Backlight compensation : Manual ON/OFF switching, center zone light measuring

system (Active when using an auto-iris lens)

Gamma correction : γ = 0.45

Environmental conditions : Temperature: – 0˚C ~ +50˚C

Humidity: less than 90% (no condensation)

Power supply : 2 V DC (Supplied from AC adaptor)

Power requirement : 2 V DC/ 30 mA

Weight : Approx. 335 g

AC Adaptor:

Environmental conditions : Temperature: – 0˚C ~ +50˚C

Humidity: less than 90 %

Power requirement : 220 – 230 V AC 50Hz

Power consumption : Approx. 3.0 W

Weight : Approx. 440 g

L73J2/XE GB 997, , 8

8 English

Dimensions: mm

Features and specifications are sub ect to change without prior notice or obligations.

95.5

VIDEO OUT VS IN

12V DC IN

POWER

1/4”–20 UNC

941.5

146

75 50

Approx. 1.8 m Approx. 1.8 m

: mm

L73J2/XE GB 997, , 8

English 9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network... Bedienungsanleitung

Sanyo

Sanyo vcb-3400p Bedienungsanleitung

Sanyo

Sanyo VDC-DP7585P Bedienungsanleitung

Sanyo

Sanyo VCC-9000EBCP/EBSP Bedienungsanleitung

Sanyo

Sanyo VCC-6584E - 1/3" Color CCD DSP High-Resolution... Bedienungsanleitung

Sanyo

Sanyo VCC-9800 Bedienungsanleitung

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo VCC-6674 Bedienungsanleitung

Sanyo

Sanyo THINK GAIA VCC-HD4600 Bedienungsanleitung

Sanyo

Sanyo VCC-HD2300 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo VDC-C1574VA - CCTV Camera Bedienungsanleitung

Sanyo

Sanyo VCB-3312P Bedienungsanleitung

Sanyo

Sanyo VDC-DP7585P Bedienungsanleitung

Sanyo

Sanyo VDC-HD3100P/HD3100 Benutzerhandbuch

Sanyo

Sanyo VCC-HD2500 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo VCC-HD2500 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo VCB-3524 Bedienungsanleitung

Sanyo

Sanyo VCC-6585P Bedienungsanleitung

Sanyo

Sanyo VDC-C1574VA - CCTV Camera Bedienungsanleitung

Sanyo

Sanyo VCC-4324P Bedienungsanleitung

Sanyo

Sanyo VDC-DP9585P Bedienungsanleitung

Sanyo

Sanyo VDC-DP7584 - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-5972P Bedienungsanleitung

Sanyo

Sanyo VCC-P9575P Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung