Sanyo VCC-WB2000P Bedienungsanleitung

INSTRUCTION MANUAL

Network Camera

VCC-WB2000P

About this manual

Before installing and using this unit, please read this manual carefully. Be sure to keep it handy

for later reference.

L5AB2/XE ( CC-WB2000P) GB 2002, 7, 24

Contents

Precautions....................................................... 2

Features ............................................................ 3

Accessories ......................................................3

Operating environment....................................4

Name and Function of Each Part .................... 5

Attaching the Lens ...........................................7

Flange Back Adjustment..................................8

Connections...................................................... 9

Basic Connections................................... 9

Connecting to a LAN ............................. 10

Connecting to the Internet .................... 10

Connecting to a Wireless LAN..............10

PPP (Dial-up) Connections ................... 11

Network Camera Settings..............................12

1Installation of Plug-in Software ............13

Browser Settings ................................... 15

Cookie Settings......................................15

2Computer and Camera

Connections ........................................... 16

Accessing Without Setting a

Password................................................ 17

Changing Access Permissions ............17

3Network Connection Settings...............18

ANETWORK SET Settings ................... 19

BWIRELESS LAN SET Settings........... 21

CPPP SET Settings............................... 23

Menu Screen and Main Menu ........................ 25

Main menu .............................................. 25

Menu screen...........................................26

Viewing Camera Images ................................ 27

LIVE VIEW Settings ........................................29

Saving Images into a Computer ...........31

VIEW FRAME Operations...............................32

CAMERA Settings...........................................33

Setting the camera title ......................... 35

Alarm Setting...................................................36

External Alarm Sensor Settings............36

MOTION DETECTOR SET Settings .......38

Alarm Data Recording Capacity............39

Expansion memory cards......................39

Recording Alarm Data............................40

Playing Back Alarm Data.......................40

BUFFER DATA VIEW screen .................41

Playing Back Expansion Memory

Card Images............................................42

Deleting Alarm Images...........................42

Pre-alarm and Post-alarm

Recording................................................43

CLOCK SET Settings ......................................44

RS-232C Settings (RS-232C SET)..................45

LANGUAGE Selection ....................................45

STATUS Checking ..........................................46

Troubleshooting..............................................47

If the camera cannot be connected ......47

If you forget the IP Address ..................47

Specifications .................................................48

English – 1 –

Precautions

In case of problem

Do not use the camera if smoke or a strange

odour comes from the unit, or if it seems not to

function correctly. Disconnect the power cord

immediately, and consult your dealer (or a

Sanyo Authorized Service Centre).

Do not open or modify

Do not open the cabinet, as it may be

dangerous and cause damage to the unit. For

internal settings and repairs, consult your dealer

(or a Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable

substance get inside the camera. If used with a

foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera,

disconnect the power cord immediately, and

consult your dealer (or a Sanyo Authorized

Service Centre). Be careful to protect the

camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera or

subject it to strong shock or vibration.

Install away from electric or magnetic

fields

If installed close to a TV, radio transmitter,

magnet, electric motor, transformer, audio

speakers the magnetic field they generate will

distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not

install it where there is greasy smoke or steam,

where the dampness may get too high, or where

there is a lot of dust.

Protect from high temperatures

Do not install close to stoves, or other heat

generating devices, such as spotlights, etc., or

where it could be subject to direct sunlight, as

that could cause deformation, discoloration or

other damages.

Be careful when installing close to the ceiling, in

a kitchen or boiler room, as the temperature

may raise to high levels.

Install where the temperature range will stay

between –10°C and 50°C. (no condensation)

Cleaning

•Dirt can be removed from the cabinet by

wiping it with a soft cloth. To remove stains,

wipe with a soft cloth moistened with a soft

detergent solution and wrung dry, then wipe

dry with dry soft cloth.

•Do not use benzine, thinner or other

chemical product on the cabinet, as that may

cause deformation and paint peeling. Before

using a chemical cloth, make sure to read all

accompanying instructions. Make sure that

no plastic or rubber material comes in

contact with the cabinet for a long period of

time, as that may cause damage or paint

peeling.

–2 –English

Features

Web Server Function

This camera is equipped with a web server

function. The camera can be accessed using a

computer’s web browser in order to view the

camera images. In addition, up to a maximum of

16 users can simultaneously access a single

camera on the network.

Network Connections

This camera is equipped with both an Ethernet

connector and an RS-232C connector, allowing

it to be connected to a variety of different

network environments, such as LANs and the

Internet.

Wireless LAN Compatibility

The camera can also be used in a wireless LAN

environment by installing the specified wireless

LAN card.

Adoption of JPEG2000

The images captured by the camera are

compressed using the JPEG2000 format before

transmission. In comparison to conventional

JPEG formats, this format produces very little

image deterioration and allows large volumes of

data to be transmitted quickly (maximum 30 fps).

Note: The transmission rate will vary depending

on individual network conditions.

A network environment that can transmit

data at high speeds is required in order to

transmit data at 30 fps.

Alarm Recording and Playback Functions

The built-in motion sensor detects movement,

and the camera can also be connected to an

external alarm sensor that is set to detect

abnormalities, so that images can be recorded

and played back when an alarm occurs.

Accessories

1Setup CD-ROM . . . . . . . . . . . . . . . . . . . 1 pc.

2Lens iris plug (4-pin) . . . . . . . . . . . . . . . 1 pc.

3Clamping core . . . . . . . . . . . . . . . . . . . . 2 pc.

English –3 –

Operating environment

The camera requires the following conditions to

operate.

•OS: In this manual, the Microsoft®Windows®

98 operating system, the Microsoft®

Windows®Millennium Edition operating

system, the Microsoft®Windows®2000

operating system and the Microsoft®

Windows®XP operating system are all

referred to as Windows.

Microsoft and Windows are trademarks, or

registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

•CPU: Intel®Pentium®III 750 MHz or higher

or similar with equivalent speed capacity

(Pentium®IV 2 GHz recommended)

Intel and Pentium are trademarks or

registered trademarks of Intel Corporation or

its subsidiaries in the United States and

other countries.

•Memory: 128 MB or more (256 MB or more

recommended)

•Drive: CD-ROM drive

•Network card: 10Base-T / 100Base-TX

•Protocols: TCP/IP, PPP, FTP, HTTP

•Browser: Microsoft Internet Explorer 5.5

SP2 or later

•Computer monitor display size of 1024 x

768 pixels or greater

–4 –English

Name and Function of Each Part

PC CARD

RS-232C

ALARM IN OUT

MODEM

COM AC24V

DC12V

GND

1 2

ETHERNET

POWER

MONITOR

OUT

CLASS 2 WIRING

1Lens mount cap

Attach this cap to protect the lens mounting

section. When using the camera, remove the

cap and attach the automatic iris-type lens

(sold separately).

2Camera mounting bracket

This bracket can be installed to either the top

or bottom of the camera as desired. When

changing the position of the camera

mounting bracket, you should always reuse

the screws that have been removed.

Note: If using a camera mounting bracket (sold

separately), select a location that is strong

enough to bear the full weight of the

camera and the mounting bracket for long

periods, and install the camera and

mounting bracket securely.

3Flange back locking screws (p. 8)

4Flange back adjustment dial (p. 8)

5PC CARD slot

Use this slot to insert a memory card or

wireless LAN card.

Note:

•Make sure that the camera’s power is turned

off before inserting the card.

•The ambient temperatures should be less

than 40°C when the camera is being used

with the card inserted.

6MONITOR OUT connector

When setting up the camera, use this

connector to connect the camera to the

VIDEO IN connector of a monitor for

adjusting the angle of view and focus.

7POWER indicator

This indicator illuminates when 24 V AC or

12 V DC is being supplied to the power input

terminals of the camera.

English –5 –

Name and Function of Each Part

CLASS 2 WIRING

PC CARD

RS-232C

ALARM IN OUT

MODEM

COM AC24V

DC12V

GND

1 2

ETHERNET

POWER

MONITOR

OUT

8Link indicator

This indicator illuminates when the camera is

connected to a network. It flashes while data

transmission is in progress.

9ALARM terminals

AALARM IN terminal

Connect this terminal to an infrared

sensor or similar use in external detection

of intruders.

BALARM OUT terminal

Connect this terminal to a buzzer or lamp

that is used to warn when the motion

sensor detects an alarm.

CGround terminal (COM)

F24 V AC/12 V DC input terminals (AC24V,

DC12V, GND)

GRS-232C connector

Use this connector to connect the camera to

a modem for transmission of data along

telephone lines, or for connecting the camera

to a computer.

Use the PC/MODEM select switch to change

the camera operation between modem and

computer operation.

HETHERNET connector

Use this connector to connect the camera

directly to a computer or to a network. Use a

10Base-T or 100Base-TX (Category 5, UTP)

cable to make the connection.

ILens iris output connector

Connect this connector (4-pin socket) to the

lens iris plug of the automatic iris-type lens

(sold separately).

JPC/MODEM select switch

Use this switch to set the function of the

RS-232C connector when connecting the

camera directly to either a modem or

computer.

Note:

•Make sure that the camera’s power is turned

off before setting the function of the

RS-232C connector.

•Using the RS-232C connector to connect the

camera to a computer is only done for

service purposes. You should not use this

switch yourself.

ALARM IN OUT

COM

–6 –English

Attaching the Lens

Use a DC-type automatic iris-type lens (sold separately).

1Remove the lens mount cap.

2Attach the CS mount-type lens.

Note:

The “L”part of the lens

should be 5 mm or less in

length. If a lens that does not

conform to this standard is

used, it will not be possible to

attach the lens correctly.

Gently screw the lens into the camera.

The following automatic iris-type lenses can

be used.

•VCL-CS8LY (standard, f = 8 mm)

•VCL-CS4LY (wide angle, f = 4 mm)

•VCL-CS2LY (extra wide angle, f = 2.8 mm)

For C mount type

In order to allow correct adjustment of the flange

back, attach the C mount adapter ring (option) to

the lens before attaching the lens to the camera.

3Connect the lens iris plug to the lens iris

output connector of the camera.

Lenses from other manufacturers may have

different plug shapes and specifications. In

such cases, you may need to rewire the lens

iris plug.

1(–) control coil 3(+) drive coil

2(+) control coil 4(–) drive coil

(Connecting to the lens iris plug)

1Cut off the plug of the lens cable, cut off

approximately 8 mm of the insulation, and

then strip the ends of the cable sheaths

leaving approximately 6 mm of sheath intact.

2Solder the ends of the cable wires to the

ends of the pins, and then attach the cover of

the lens iris plug.

English –7 –

Flange Back Adjustment

The flange back is the distance between the lens (sold separately) and the image capturing surface of

the camera. It is adjusted at the time of shipment from the factory to accommodate the types of lenses

that are generally assumed to be in use.

Accordingly, the flange back does not normally need to be adjusted. However, if attaching a zoom lens

and changing from wide angle to telephoto, the images may not be captured in proper focus, and so in

such cases the flange back should always be adjusted by following the procedure given below.

1Connect a cable between the MONITOR

OUT connector of the camera and the

VIDEO IN connector of a monitor.

2Turn on the camera’s power.

Adjust the flange back while viewing the

camera images on the monitor.

3Use a Phillips screwdriver to loosen the

two flange back locking screws.

4Move the zoom lens to the telephoto

setting, and then use the lens focus ring

to adjust the focus.

5Move the zoom lens to the wide angle

setting, and then use the flange back

adjustment dial to adjust the focus.

6Move the zoom lens from wide angle to

telephoto (repeating steps 4 and 5) and

check that the images are properly

focused. Then tighten the flange back

locking screws.

PC CARD

RS-232C

ALARM IN OUT

MODEM

COM AC24V

DC12V

GND

1 2

ETHERNET

POWER

MONITOR

OUT

Power supply

TV monitor

(sold separately)

3, 6

–8 –English

Connections

Turn off the power for all equipment before making any connections.

Basic Connections

1Connect the camera to a computer.

Connect a cable between the ETHERNET connectors of the camera and the computer.

Use a crossed wire-type Ethernet cable.

2Connect the power supply.

When using this unit, the supplied clamping core Amust be installed on the power cord, in order to

prevent electromagnetic interference to the other devices connected.

•If using a commercially-available 24 V AC adapter, always be sure to connect the ground wire

(18AWG or higher) to the ground terminal. (Figure 1)

•If using a 12 V DC power supply, make the connections as shown in Figure 2.

Note:

•In order to avoid any problems with the camera and the power supply, take sufficient care to

ensure that the polarities are correct when connecting the power supply.

•When the accessory ferrite cores are attached, they will increase the load on the cable, so after

doing the installation, adjust the cable accordingly.

3Insert the power cord plug into a wall outlet.

The POWER indicator (A) will illuminate.

PC CARD

RS-232C

ALARM IN OUT

MODEM

COM AC24V

DC12V

GND

1 2

ETHERNET

POWER

MONITOR

OUT

24 V AC connection

Figure 1 Figure 2

12 V DC connection

(A)

Computer

Ethernet cable

(crossed wire-type cable)

AC24V

DC12V

GND AC24V

DC12V

GND

CLASS 2 WIRING

English –9 –

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCC-HD5400 Benutzerhandbuch

Sanyo

Sanyo VCB-3312P Bedienungsanleitung

Sanyo

Sanyo VCC-6572P Bedienungsanleitung

Sanyo

Sanyo VCC-HD2500P Bedienungsanleitung

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo VCC-HD5600 - Full HD 1080p Day/Night Pan-Tilt-Zoom... Bedienungsanleitung

Sanyo

Sanyo VCB-3454 Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100P Bedienungsanleitung

Sanyo

Sanyo VCC-9800 Bedienungsanleitung

Sanyo

Sanyo VCC-P7574N - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo VDC-C1575VP Bedienungsanleitung

Sanyo

Sanyo VCB-3385P Bedienungsanleitung

Sanyo

Sanyo VCC-9684VA - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-5974P Bedienungsanleitung

Sanyo

Sanyo VCC-4794E - 1/3" Color CCD DSP Day/Night... Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100P Bedienungsanleitung

Sanyo

Sanyo VCC-XZ600P Bedienungsanleitung

Sanyo

Sanyo VC-0450 Bedienungsanleitung

Sanyo

Sanyo VCC-6584DN - CCTV Camera Bedienungsanleitung

Sanyo

Sanyo VCB-3374 Bedienungsanleitung

Sanyo

Sanyo VDC-D1785IRVP Bedienungsanleitung

Sanyo

Sanyo VCC-9684VA - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-ZM300 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung