Sartorius R 160 P Bedienungsanleitung

Sartorius Research.

R 160 P

Electronic Semi-Microbalance

Installation and Operating Instructions

1 Power receptacle, fuse, 8Level indicator

voltage selector

9 ON/OFF key

2 Menu access switch

10 Print control (functions only if balance

3Interface has a built-in interface)

4Protective ring 11 Tare control

5Pan 12 CAL key

6Shield plate 13 Selector key

7Leveling foot 14 Weight display

Sartorius Research

R 160 P

With this Sartorius Semi-Microbalance you have acquired a

high-quality electronic weighing Instrument that will ease your

daily work load.

Before you operate your new balance, please read these Instal-

lation and operating instructions carefully.

Pursuant to the German Directive for the Implementation

of Regulations for Prevention of Accidents "Elektrische

Anlagen und Betriebsmittel (VBG 4)" [Electrical Installa-

tions and Equipment] of April 1986, it is hereby certified

that the equipment delivered, "Semi-Microbalance, model

R 160 P" is manufactured and tested in compliance with

the following DIN/VDE regulations

DIN IEC 348/VDE 041 1:

Safety requirements for electronic measuring apparatus

DIN IEC 380/VDE 0806:

Safety of electrically energized office machines

DIN IEC 601 /VDE 0750:

Safety of medical electrical equipment

When you use electrical equipment in installations and

under ambient conditions requiring higher safety Stan-

dards, you must comply with the provisions as specified

in the applicable regulations for installation in your coun-

try.

Contents

Page

Equipment Supplied 5

Installation Instructions 6

Startup 7

Operation 8

Weighing 10

Calibration 11

Balance Operating program 13

Troubleshooting Guide 16

Interface 17

Accessories (Options) 18

Specifications 19

Equipment Supplied

Do not miss out on the benefits of our full warranty.

Please complete the warranty card, indicating the date of instal-

lation, and return the card to your Sartorius dealer.

The equipment supplied includes the components pictured on

the left.

Save the packaging and the box for shipping your balance to

prevent any damage caused during transportation.

Installation

Instructions

Choose a suitable place to set up your balance. lt should not be

exposed to the following:

- heat radiation

- aggressive/corrosive substances

- vibrations

- drafts.

Your Sartorius balance will provide accurate readouts even

when it is exposed to unfavorable weighing conditions. You can

adapt it to your requirements simply by changing the menu

code settings of the balance operating program. For this pur-

pose, please refer to pages 13 -15.

After you have plugged your balance into a wall outlet, al-

low for at least 2 hours' warmup.

Important Note

Unplug the balance before you connect or disconnect peripher-

als.

Startup

Install components (6 - 4) in the weighing chamber.

The balance has been factory-set to 220 volts.

How to change the voltage setting:

Adjust the voltage selector (1) to your local line voltage rating.

Write the new voltage setting on the manufacturer's label lo-

cated on the rear panel of the balance. Whenever you change

the operating voltage to 100/120 V, make sure to exchange the

installed T 80 mA fuse (1) for the T 160 mA fuse that comes

with the balance.

The fuse (1) is plugged into the voltage selector located on the

rear panel of the balance.

100/120 V-T 160mA

220/240 V-T 80mA

At the point of use, plug the power cable into a properly in-

stalled wall outlet. lf you use a wall outlet that does not have a

protective grounding conductor, make sure to ground the bal-

ance.

Level the balance using the leveling feet (7) so that

the air bubble is centered within circle of the level

indicator (8).

Operation

The weight display shows the following special

Status messages for your information:

BUSY

The balance processor is still busy processing a function and

will not accept any other commands to perform functions at this

time.

STANDBY

The display has been turned off with the ON/OFF key (9) and

the balance is now in the ready-to-operate state so that it does

not require warmup.

POWER OFF

The balance has been disconnected from line power (power

failure or outage, reconnection to line power after the balance

has been unplugged).

CAL

The calibration function has been activated.

Press the ON/OFF key (9) to turn the display on or off. You can

also turn it on with the tare control (11).

After the balance is plugged into a wall outlet, the weight display

will go out whenever you switch off the balance. All other cir-

cuits will remain energized (indicated by STANDBY). This

means the balance is immediately ready to operate without re-

quiring warmup the next time you switch it on.

After the power is turned on, a test of all essential electronic

functions is run automatically. The self test ends with the read-

out 0.00000 g.

Now place your sample on the pan (5) to determine the weight.

Close the doors of the weighing chamber. Read off the weight

indicated in the display (14) as soon as the weight unit (in this

case "g") appears as the stability symbol.

lf you wish to use a Container or if the display does not indicate

0.00000 g, press the tare control to zero the display.

Weighing

The R 160 P has a second display range which you can easily

select at the touch of the soft key selector (13).

lf you select the second range, only four decirnal places

(instead offive) will be displayed.

Standard display range: 0.00000 g

Second display range: 0.0000 g

The balance will stabilize at a faster rate in the display range

with an accuracy of 4 decimal places - 100 µ g readability - than

in the one with five decirnal places -10 µ g readability.

This selector provides you with a readily accessible weighing-in

convenience feature so that you do not have to access the

menu to change the codes set in the balance operating

program.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sartorius Skala Handbücher

Sartorius

Sartorius CAPXS Series Bedienungsanleitung

Sartorius

Sartorius PMA.Evolution Bedienungsanleitung

Sartorius

Sartorius EC1XS.-......-L Originalbetriebsanleitung

Sartorius

Sartorius Cubis MCE Series Bedienungsanleitung

Sartorius

Sartorius U 4100 Bedienungsanleitung

Sartorius

Sartorius Factory Series Originalbetriebsanleitung

Sartorius

Sartorius PMA.Vision VIS1Y EU Series Bedienungsanleitung

Sartorius

Sartorius PMA7501-Y00G Bedienungsanleitung

Sartorius

Sartorius 1601 MP 8 Bedienungsanleitung

Sartorius

Sartorius U 3600 Bedienungsanleitung

Sartorius

Sartorius YDK 01 Bedienungsanleitung

Sartorius

Sartorius EVO1S Bedienungsanleitung

Sartorius

Sartorius Cubis MCA Series Bedienungsanleitung

Sartorius

Sartorius PMA 7501-000G Bedienungsanleitung

Sartorius

Sartorius Sartorius Basic plus Bedienungsanleitung

Sartorius

Sartorius Master series Bedienungsanleitung

Sartorius

Sartorius Sartorius PMA 35D-X Betriebsanleitung

Sartorius

Sartorius CW3P Bedienungsanleitung

Sartorius

Sartorius Signum 1 Bedienungsanleitung

Sartorius

Sartorius Secura Bedienungsanleitung

Sartorius

Sartorius CW3P Bedienungsanleitung

Sartorius

Sartorius 2405 Benutzerhandbuch

Sartorius

Sartorius TopMix2.Touch TM02-X Bedienungsanleitung

Sartorius

Sartorius Combics CAPS..-LU Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung