Satel FD-1 Bedienungsanleitung

FD-1

WATER FLOOD DETECTOR

fd1_en 09/17

The FD-1 detector senses the presence of water leaks or flooding in rooms with plumbing.

This manual applies to the detector with electronics version 1.4 (or newer).

1. Features

External flood sensor.

Supply voltage control.

LED indicator.

Tamper protection against cover removal and tearing enclosure from the wall.

2. Description

The alarm is triggered approximately 4 seconds after the water level

reaches the height at which the flood sensor electrodes are installed.

During the alarm condition the relay contacts are open and the LED

is ON. The alarm ends a few seconds after the water level drops

below the height at which the flood sensor electrodes are installed.

Supply voltage control

In the event of a prolonged voltage drop below 9 V (±5%), the

detector will signal a trouble. The trouble is indicated by the

activation of alarm relay and the steady light of LED indicator. The

trouble signaling will continue as long as the trouble persists.

Electronics board

terminals:

+12V - power input.

COM - common ground.

TMP - tamper output (NC).

NC - alarm output (NC relay).

tamper contact.

LED indicating the relay status. It lights red when the relay is

open.

pins for enabling/disabling the LED indicator. The LED indicator

is enabled when jumper is placed on the pins.

terminals for the flood sensor connection.

3. Installation

Disconnect power before making any electrical connections.

The detector is designed for indoor operation.

1. Select the place where the detector is to be installed.

2. Open the detector enclosure (Fig. 2).

3. Make the wire entry opening in the enclosure base.

4. Run the wires through the opening made.

2 FD-1 SATEL

5. Pull the flood sensor wires through the hole in the enclosure.

6. Use screws to fix the enclosure base to the mounting surface (Fig. 4). Wall plugs (screw

anchors) and screws are included in the detector delivery set.

7. Connect the wires to the detector terminals.

8. Close the detector enclosure.

9. Test the detector for proper operation, by submerging the flood sensor in water.

10.Secure the flood sensor wires and the flood sensor itself (Fig. 5). The detector is now

ready for work.

4. Specifications

Supply voltage .................................................................................................12 V DC (±15%)

Standby current consumption ........................................................................................ 2.5 mA

Maximum current consumption ......................................................................................... 4 mA

Relay contacts rating (resistive load) .............................................................. 40 mA / 16 V DC

Flood sensor cable length....................................................................................................3 m

Environmental class.................................................................................................................II

Operating temperature range.............................................................................-10 °C...+55 °C

Enclosure dimensions................................................................................... 26 x 112 x 29 mm

Weight.................................................................................................................................81 g

The declaration of conformity may be consulted at www.satel.eu/ce

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. +48 58 320 94 00

www.satel.eu

Inhaltsverzeichnis

Andere Satel Sicherheitssensor Handbücher

Satel

Satel OPAL Bedienungsanleitung

Satel

Satel MGD-300 Bedienungsanleitung

Satel

Satel ABAX 2 Bedienungsanleitung

Satel

Satel SX6-TO Bedienungsanleitung

Satel

Satel ASD-110 Bedienungsanleitung

Satel

Satel AQUA Series Bedienungsanleitung

Satel

Satel AMD-102 Bedienungsanleitung

Satel

Satel OPAL Bedienungsanleitung

Satel

Satel abax 2 ADD-200 Bedienungsanleitung

Satel

Satel AMD-103 Bedienungsanleitung

Satel

Satel micra MXD-300 Bedienungsanleitung

Satel

Satel OPAL Plus Bedienungsanleitung

Satel

Satel SPL-TO Bedienungsanleitung

Satel

Satel AGD-100 Bedienungsanleitung

Satel

Satel ACTIVA-2 Bedienungsanleitung

Satel

Satel GRAPHITE Pet Bedienungsanleitung

Satel

Satel AGD-100 Bedienungsanleitung

Satel

Satel INDIGO Bedienungsanleitung

Satel

Satel ARD-100 Bedienungsanleitung

Satel

Satel COBALT Pro Bedienungsanleitung

Satel

Satel ADD-200 Bedienungsanleitung

Satel

Satel A D-200 Series Bedienungsanleitung

Satel

Satel INDIGO TESTER Bedienungsanleitung

Satel

Satel APD-100 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung

Pyronix

Pyronix KX10DTP Bedienungsanleitung