Satel SATELLINE-M3-TR8 Kurzanleitung zur Einrichtung
SATELLINE-M3-TR8
SATELLINE-M3-TR9
TRANSCEIVER MODULES
INTEGRATION GUIDE
Version 1.7
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
1
IMPORTANT NOTICE
All rights to this manual are owned solely by SATEL Oy (referred to in this user guide as SATEL).
All rights reserved. The copying of this manual (without the written permission from the owner) by
printing, copying, recording or by any other means, or the full or partial translation of the manual
to any other language, including all programming languages, using any electrical, mechanical,
magnetic, optical, manual or other methods or devices is forbidden.
SATEL reserves the right to change the technical specifications or functions of its products, or to
discontinue the manufacture of any of its products or to discontinue the support of any of its
products, without any written announcement and urges its customers to ensure, that the
information at their disposal is valid.
SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind of
warranty including guarantees on suitability and applicability to a certain application. Under no
circumstances is the manufacturer or the developer of a program responsible for any possible
damages caused by the use of a program. The names of the programs as well as all copyrights
relating to the programs are the sole property of SATEL. Any transfer, licensing to a third party,
leasing, renting, transportation, copying, editing, translating, modifying into another programming
language or reverse engineering for any intent is forbidden without the written consent of SATEL.
SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE USED IN
ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTION NOR AS A PART OF
ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY IF THEY
ARE USED IN ANY OF THE APPLICATIONS MENTIONED.
Salo, FINLAND 2017
Copyright: 2017 SATEL Oy
No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without the
prior written permission of SATEL Oy.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
2
RESTRICTIONS ON USE –SATELLINE-M3-TR8
SATELLINE-M3-TR8 radio transceiver module has been designed to operate on 868-870 MHz,
the exact use of which differs from one region and/or country to another. The user of a radio
transceiver module must take care that the said device is not operated without the permission of
the local authorities on frequencies other than those specifically reserved and intended for use
without a specific permit.
SATELLINE-M3-TR8 is allowed to be used in the following countries, either on license free channels
or on channels where the operation requires a license. More detailed information is available at
the local frequency management authority.
Countries: AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IN*, IS, IT, LT, LU,
LV, MT, NL, NO, PL, PT, RU, RO, SE, SI and SK.
*) Own frequency variant for India.
This integration guide applies to the combination of Firmware/Hardware version listed in the
table below. See www.satel.com for the newest firmware and Integration Guide version.
Firmware version
Hardware version
Note!
07.22.2.1.0.1
SPL0030e
First official release
WARNING - RF Exposure
To comply with RF exposure compliance requirements, maximum antenna gain (in dB) must not
exceed calculated signal loss (in dB) in antenna cable and separation distance of at least 25
cm must be maintained between the antenna of this device and all persons. This device must
not be co-located or operating in conjunction with any other antenna or transmitter.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
3
RESTRICTIONS ON USE –SATELLINE-M3-TR9
SATELLINE-M3-TR9 radio transceiver module has been designed to operate on 902-928 MHz,
the exact use of which differs from one region and/or country to another. The user of a radio
transceiver module must take care that the said device is not operated without the permission of
the local authorities on frequencies other than those specifically reserved and intended for use
without a specific permit.
SATELLINE-M3-TR9 is allowed to be used in the following countries. More detailed information is
available at the local frequency management authority.
Countries: AU, CA and US.
This radio transmitter 2422A-SATELTA31 has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Antenna type
Manufacturer
Antenna model
Maximum gain (dBi)
Omnidirectional
Oy CompleTech Ltd
CA915H
5
Directional (yagi)
Oy CompleTech Ltd
CA930Y
6
NOTE!
According to the requirements of the FCC, the integrator should make sure that the SATELLINE-
M3-TR9 is compliant to part 15C while integrated in the host device. Output power and
spurious emissions should be verified.
WARNING - RF Exposure
To satisfy FCC and ISED RF exposure requirements for mobile transmitting devices, a
separation distance of 25 cm or more should be maintained between antenna of this device
and persons during device operation. To ensure compliance, operations at closer than this
distance is not recommended. The antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter. FCC regulations allow up to 36 dBm
equivalent isotropically radiated power (EIRP). Therefore, the sum of the transmitted power (in
dBm), the cabling loss and the antenna gain cannot exceed 36 dBm.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
4
PRODUCT CONFORMITY
Hereby, SATEL Oy declares that SATELLINE-M3-TR8 radio transceiver module is in compliance
with the essential requirements (radio performance, electromagnetic compatibility and electrical
safety) and other relevant provisions of Directive 2014/53/EU. Therefore the equipment is labeled
with the following CE-marking.
For SATELLINE-M3-TR9 only:
This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. Changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
5
WARRANTY AND SAFETY INSTRUCTIONS
Read these safety instructions carefully before using the product:
-Warranty will be void, if the product is used in any way that is in contradiction with the
instructions given in this manual
-The radio transceiver module is only to be operated at frequencies allocated by local
authorities, and without exceeding the given maximum allowed output power ratings.
SATEL and its distributors are not responsible, if any products manufactured by it are used
in unlawful ways.
-The devices mentioned in this manual are to be used only according to the instructions
described in this manual. Faultless and safe operation of the devices can be guaranteed
only if the transport, storage, operation and handling of the device are appropriate. This
also applies to the maintenance of the products.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
6
HOST INTEGRATION
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host
was previously authorized as an unintentional radiator under the Declaration of Conformity
procedure without a transmitter certified module and a module is added, the host manufacturer
is responsible for ensuring that after the module is installed and operational the host continues
to be compliant with the Part 15B unintentional radiator requirements. This module is certified
for Fixed and Mobile Applications only, for portable applications you will require a new
certification.
This device has been modularly approved. Model name, FCC and Industry Canada identifiers of
this product must appear on the outside label of the end-user equipment.
Host labelling example:
Model Name: SATEL-TA31
Contains FCC ID: MRBSATEL-TA31
IC: 2422A-SATELTA31
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
7
TABLE OF CONTENTS
IMPORTANT NOTICE ............................................................................................. 1
RESTRICTIONS ON USE –SATELLINE-M3-TR8 ....................................................... 2
RESTRICTIONS ON USE –SATELLINE-M3-TR9 ....................................................... 3
PRODUCT CONFORMITY........................................................................................ 4
WARRANTY AND SAFETY INSTRUCTIONS ............................................................. 5
HOST INTEGRATION ............................................................................................. 6
TABLE OF CONTENTS ............................................................................................ 7
1INTRODUCTION ..................................................................................... 10
1.1 Terms and abbreviations......................................................................... 10
1.2 Description of the product ....................................................................... 10
2TECHNICAL SPECIFICATIONS.................................................................. 11
2.1 Absolute maximum ratings...................................................................... 11
2.2 DC electrical specifications....................................................................... 11
2.3 Specifications, SATELLINE-M3-TR8........................................................... 12
2.4 Specifications, SATELLINE-M3-TR9........................................................... 15
2.5 Specifications, SATELLINE-M3-TR9, Option 9........................................... 16
3TIME PARAMETERS FOR STARTUP AND SHUTDOWN SEQUENCES......... 17
3.1 Startup sequence ..................................................................................... 17
3.2 Shutdown and ENA sequences ................................................................ 18
4ELECTRICAL INTERCONNECTION............................................................ 19
4.1 DTE connector........................................................................................... 19
4.2 Pin order of the DTE connector ................................................................ 20
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
8
4.3 Equivalent I/O Schematics ....................................................................... 21
4.4 VCC_IO pin ............................................................................................... 22
4.5 Service pin................................................................................................ 22
4.6 Stat pin ..................................................................................................... 23
4.7 VCC pins ................................................................................................... 23
4.8 UART pins ................................................................................................. 23
4.9 GPIO pins ................................................................................................. 23
4.10 Antenna interface .................................................................................... 24
5MECHANICAL CONSIDERATIONS ........................................................... 25
5.1 Fixing device to host ................................................................................ 25
5.2 Module dimensions.................................................................................. 26
6OPERATING MODES ............................................................................... 27
6.1 Safe mode ................................................................................................ 27
6.2 Power up / power down scenarios........................................................... 27
6.3 Sleep Mode .............................................................................................. 28
6.4 Power Save Mode..................................................................................... 28
6.5 Restart ...................................................................................................... 29
7CHANGING PARAMETERS USING SL COMMANDS ................................ 30
7.1 SL Commands........................................................................................... 30
7.2 SL Command Mode .................................................................................. 30
8DEFAULT DELIVERY VALUES –SATELLINE-M3-TR8................................. 32
9DEFAULT DELIVERY VALUES –SATELLINE-M3-TR9................................. 33
10 CONSIDERATIONS.................................................................................. 34
10.1 EMI Interferers ......................................................................................... 34
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
9
10.2 Electrostatic discharge ............................................................................. 34
10.3 Using the device in unmanned high reliability applications .................. 35
11 APPENDIX A ........................................................................................... 36
11.1 Sub-band Channel Assignment –SATELLINE-M3-TR8............................. 36
11.1.1 Sub-band .................................................................................................................36
11.1.2 Duty cycle.................................................................................................................36
11.1.3 Power level ...............................................................................................................36
11.1.4 Channel assignment ..................................................................................................36
12 APPENDIX B ........................................................................................... 37
12.1 SL COMMANDS –SATELLINE-M3-TR8 ...................................................... 37
13 APPENDIX C ........................................................................................... 43
13.1 SL COMMANDS –SATELLINE-M3-TR9, Freewave..................................... 43
13.2 COMMANDS - SATELLINE-M3-TR9, Option 9 ........................................... 47
14 VERSION HISTORY ................................................................................. 48
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Satel Transceiver Handbücher
Satel
Satel TR489 Kurzanleitung zur Einrichtung
Satel
Satel SATELLINE-1AS Bedienungsanleitung
Satel
Satel SATEL-LP24 Kurzanleitung
Satel
Satel SATEL-TR4+ Kurzanleitung zur Einrichtung
Satel
Satel ATELLINE-M3-TR3 Kurzanleitung zur Einrichtung
Satel
Satel slr6 Bedienungsanleitung
Satel
Satel SATEL-TR49 SnapOn Kurzanleitung zur Einrichtung
Satel
Satel SATELLINE-M3-R9 Kurzanleitung zur Einrichtung
Satel
Satel GFU27 Bedienungsanleitung
Satel
Satel GFU30 Bedienungsanleitung
