SATO MB200 Bedienungsanleitung

Barcode Printer MB200

MB200

Quick Guide

SATO#MB200#E#Hyo_1.p65 02.5.17, 2:50 PM1

Warning!

SATO#MB200##E.p65 02.5.17, 2:23 PM2

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,and

(2)This device must accept any interference received,

including interference that may cause undesired

operation.

NOTE : This equipment has been tested and found to

pursuant to Part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against

equipment generates use and can radiate radio

frequency energy and,if not installed and used in

interference to radio communications.However,there

particular installation.If this equipment does cause

harmful interference to radio or television reception,

off and on,the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and

-Connect the equipment into an outlet on a circuit

-Consult the dealer or an experienced radio/TV

comply with the limits for a Class B digital device,

harmful interference in a residential installation.This

accordance with instructions,may cause harmful

is no guarantee that interference will not occur in a

which can be determined by turning the equipment

receiver.

different from that to whcih the receiver is connected.

technician for help.

Features of the MB200

With compact and lightweight body combined with high

performances, this printer prints barcodes clearly on various

types of thermal paper.

ÐExcellent Printing Performance

Not only does this printer print barcodes clearly, but it can

also enlarge and print various types of fonts and Kanji

characters in a free layout.

ÐDurable and Easy to Use

This printer is also superb in durability, as it has been

designed with the premises of printing barcodes. Also,

special consideration has been taken so that the printer can

be easily cleaned everyday.

ÐDispenser Function

As a portable printer, this printer can easily print and

dispense labels to enable the application of labels at site.

SATO#MB200##E.p65 02.5.17, 2:23 PM3

Table of Contents

1. Safety Precautions ......................................5

Markings and Symbols .............................5

Precautions in Use .................................13

2. Unpacking..................................................14

3. Parts Name................................................15

Name and Function of Operating Parts ..17

4. Before Starting...........................................18

Charging the Battery Pack...................... 18

Installing and removing the Battery Pack ..

Setting Labels .........................................22

Preparation/Operation

SATO#MB200##E.p65 02.5.17, 2:23 PM4

Safety Precautions

1. Safety Precautions

In this section, safety precautions about printer operation are

explained to ensure proper care and usage. Make sure to

read these carefully before using your printer.

Markings and Symbols

The following symbols or markings are used in this quick

guide and on the printer so that you can properly use the

printer, and to prevent any damage to property, harm or

injury to yourself and others. Make sure to read their

explanations carefully to familiarize yourself with their

meanings.

This symbol indicates information that, if

ignored or applied incorrectly, creates the

danger of death or serious personal

injury.

This symbol indicates information that, if

ignored or applied incorrectly, creates the

possibility of personal injury or property

damage.

Warning

Caution

SATO#MB200##E.p65 02.5.17, 2:23 PM5

Safety Precautions

Symbol example

The triangle ( ) indicates something you should

take absolute care when doing. The cautions are

indicated concretely within the symbol. The symbol

on the left indicates caution with electric shock.

A diagonal line within a circle ( ) indicates

something you should not do. The symbol on the left

indicates you should not try to take the unit apart.

A black circle ( ) indicates something you need to

do. The symbol on the left indicates you should

unplug the unit from the wall outlet.

SATO#MB200##E.p65 02.5.17, 2:23 PM6

Safety Precautions

Warning!

Liquids

Do not place any containers with water or chemicals,

such as flower vases or cups, as well as small

metallic objects near the printer. If any of these

should fall into the printer, immediately turn off the

power and contact your nearest dealer or service

center. Continued use creates the danger of fire or

electrical shock.

Foreign Matter

Do not drop or insert metallic or flammable objects

into the openings on the printer (such as outlets for

cables). If any of these should fall into the printer,

immediately turn off the power and contact your

nearest dealer or service center. Continued use

creates the danger of fire or electrical shock.

Dropping and Damage

Should the printer ever fall or otherwise become

damaged, immediately turn off the power and contact

your nearest dealer or service center. Continued use

creates the danger of fire or electrical shock.

SATO#MB200##E.p65 02.5.17, 2:23 PM7

Safety Precautions

Warning!

Abnormal Conditions

Continued use of the printer while it is emitting smoke

or strange odor, creates the danger of fire or electrical

shock. Immediately turn off the power and contact

your nearest dealer or service center for repairs. Do

not try to service the printer by yourself.

Disassembly

Never try to take the unit apart or modify it in any

way. Doing so creates the danger of fire or electrical

shock. Contact your nearest dealer or service center

for repairs.

Battery Pack

•Never try to take apart the battery pack or modify it

in any way such as with a solder.

•Never expose the battery to direct flame, throw it

into fire, or take any actions that may lead to

shorting.

•When charging the battery pack, make sure to use

the specified battery charger.

SATO#MB200##E.p65 02.5.17, 2:23 PM8

Safety Precautions

Warning!

AC Adapter / Battery Charger (Optional)

•Use only the specified voltage. Using a different

voltage may create the danger of fire or electrical

shock.

•Never use the battery charger with any other

battery pack except for the specified one. Doing so

can rupture the battery, cause leakage, fire or

electrical shock.

•Never cut, damage or modify the power cord. Also,

never place heavy objects on, set fire to or pull the

power cord, as it can damage the cord and create

the danger of fire or electrical shock.

•Should the power cord ever become seriously

damaged (internal wiring exposed or shorted),

contact your nearest dealer or service center.

Continued use of such a cord creates the danger of

fire or electrical shock.

•Never modify, excessively bend, twist, or pull the

power cord. Doing so creates the danger of fire or

electrical shock.

SATO#MB200##E.p65 02.5.17, 2:23 PM9

Safety Precautions

Caution!

Location

Do not locate the printer in areas subjected to high

humidity or dew. If dew forms inside the printer,

immediately turn off the power and do not use it until

it has dried up. Continued use creates the danger of

electrical shock.

PowerNever operate the power switch, replace the battery

pack or unplug the AC adapter or battery charger with

wet hands. Doing so creates the danger of electrical

shock.

SATO#MB200##E.p65 02.5.17, 2:23 PM10

This product is intended to be supplied by a power

supply(AC adapter)identified as both of the following:

A.Listed Power Unit marked"class2"or I.T.E Power

Supply marked"LPS"or UL1950 Power Supply marked

"LPS"and rated 7.2V to 9.0Vdc,3000mA;and

B.CB certified AC adapter,Model SA130A-0930U-S

rated 8.4Vdc or 9.0Vdc,or an alternate CB certified AC

Adapter which will be added in the CB certification of

the product.

Andere Handbücher für MB200

Inhaltsverzeichnis

Andere SATO Barcode-Lesegerät Handbücher

SATO

SATO ARGOX AS-9400DC Bedienungsanleitung

SATO

SATO Argox AR-3201 Bedienungsanleitung

SATO

SATO CL4NX Plus Bedienungsanleitung

SATO

SATO ARGOX AS-9400DC Bedienungsanleitung

SATO

SATO PV4 Bedienungsanleitung

SATO

SATO CT408i DT Bedienungsanleitung

SATO

SATO iGT400 Series Bedienungsanleitung

SATO

SATO Argox D4 Series Bedienungsanleitung

SATO

SATO DR300 Bedienungsanleitung

SATO

SATO PV4 Bedienungsanleitung

SATO

SATO CL4NX RIDF Bedienungsanleitung

SATO

SATO CT4i Series Bedienungsanleitung

SATO

SATO GL412e Bedienungsanleitung

SATO

SATO GL 4xxe Series Bedienungsanleitung

SATO

SATO ARGOX AS-9400BT Bedienungsanleitung

SATO

SATO ARGOX AS-9400DC Bedienungsanleitung

SATO

SATO CL4e Series Bedienungsanleitung

SATO

SATO GL408e Bedienungsanleitung

SATO

SATO GT400 series Bedienungsanleitung

SATO

SATO ARGOX AS-9400 Bedienungsanleitung

SATO

SATO M-8400RVe Series Bedienungsanleitung

SATO

SATO PV3 Bedienungsanleitung

SATO

SATO ARGOX AS-9400 Bedienungsanleitung

SATO

SATO TC408 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung