SawStop RT-TGI Bedienungsanleitung
OWNER’S MANUAL
INDUSTRIAL IN-LINE ROUTER TABLE
MODEL RT-TGI
Copyright SawStop, LLC
All Rights Reserved
Updates of this manual may be
available at www.sawstop.com
2nd printing, February 2018
The saw shown on the front cover is the Industrial Cabinet Saw, Model ICS
with Industrial Mobile Base. Your saw may look different.
The ICS In-Line Router Table Assembly shown on the front cover includes the Stock
Guide for Router Table Fence (RT-STP). This is an optional accessory that does not
come included with your ICS In-Line Router Table Assembly. The Four-Post Router Lift
with Lock and Downdraft Dust Collection Box for Router Lift are also shown installed
on the ICS In-Line Router Table Assembly. The Four-Post Router Lift with Lock and
Downdraft Dust Collection Box for Router Lift are not included with your ICS In-Line
Router Table Assembly and your setup may look different.
SawStop, the SawStop blade logo, and the conguration of this product are either
registered trademarks or trademarks of SawStop, LLC. Software copyright by
SawStop, LLC. All rights reserved.
TO OUR CUSTOMERS
Thank you for purchasing the SawStop ICS In-Line Router Table Assembly. We are condent
you will be pleased with the quality and performance.
This manual tells you more about your ICS In-Line Router Table Assembly and how to
operate and maintain it. Please read the manual carefully. The manual also includes our
warranty and important safety information.
If you ever have any questions or comments, feel free to contact us at the address below.
SawStop, LLC
11555 SW Myslony Street | Tualatin, Oregon 97062 USA
Phone: (503) 570-3200
Fax: (503) 570-3303
Email: [email protected]
www.sawstop.com
HOW TO GET HELP
Missing Parts? Have Questions?
Our technical support team is standing by
M-F, 6:30am-5pm PST
to help with whatever you need.
503.582.9934
Give us a call at
SERVICE@SAWSTOP.COM
Email us at
TABLE OF CONTENTS
Assembly Options................................................................................
Before You Begin..................................................................................
Product Specications.........................................................................
Parts Inventory.....................................................................................
Cast Iron Table Parts and Hardware.............................................................................
Support Legs Parts and Hardware...............................................................................
Power Switch Parts and Hardware................................................................................
Fence Assembly Parts and Hardware............................................................................
Assembly & Installation........................................................................
Assembling the Cast Iron Table......................................................................................
Hold-Down Strap Installation........................................................................................
Assembling and Installing the Support Legs and Power Switch...................................
In-Line Installation Left of Left Wing..............................................................................
Rail Requirements: In-Line Right of ICS Right Wing.....................................................
In-Line Installation Right: Between 36” Rails.................................................................
In-Line Installation Right: Between 52” Rails.................................................................
Assembling the Fence Assembly...................................................................................
Reference............................................................................................
Warranty.........................................................................................................................
Safety.............................................................................................................................
Warnings........................................................................................................................
Exploded View 1: Cast Iron Table (RT-C30) ....................................................................
Parts List 1: Cast Iron Table (RT-C30).............................................................................
Exploded View 2: Support Legs (RT-ST2).....................................................................
Parts List 2: Support Legs (RT-ST2)................................................................................
Exploded View 3: Power Switch (RT-PSW)..................................................................
Parts List 3: Power Switch (RT-PSW)...........................................................................
Exploded View 4: 32” Fence Assembly (RT-F32)...........................................................
Parts List 4: 32” Fence Assembly (RT-F32)....................................................................
Available Accessories..........................................................................
1
4
5
6
6
7
8
9
11
11
12
16
20
22
23
25
31
36
36
37
37
39
40
41
42
43
44
45
46
47
1RT-TGI OWNER’S MANUAL
ASSEMBLY OPTIONS
The between-rail installation of the 30” x 16” router table is only compatible with T-Glide Fence System
– Industrial Series II (TGI 2) rails. If you wish to use the T-Glide Fence System – Industrial Series (CBFR)
rails, you will have to modify them signicantly.
i
In-Line Left of Left Wing Option 1 of 3
PAGES:
1-3
The 30” x 16” Cast Iron Router Table with 32" Fence Assembly can be mounted to your
SawStop Industrial Cabinet Saw (ICS) with T-Glide Fence System-Industrial Series II
(TGI2) rails in any of three different congurations depending on your needs.
This conguration increases the available table space of your SawStop table saw and
provides the maximum ripping capacity to the left of the saw blade.
Required Components:
• 30” x 16” Cast Iron Router Table (RT-C30)
• Power Switch (RT-PSW)
• Support Legs (RT-ST2)
Compatible With:
• T-Glide Fence System – Industrial Series I or II (CBFR or TGI2) rails
2
RT-TGI OWNER’S MANUAL
In-Line Right: Between 36” Rails Option 2 of 3
This conguration minimizes the total footprint of your SawStop table saw and router
table. Users may choose to build an intermediate table to ll the gap between the right
extension wing and the router table (no intermediate table for this conguration is offered
by SawStop). The gap in the table measures 210mm wide.
Required Components:
• 30” x 16” Cast Iron Router Table (RT-C30)
• Power Switch (RT-PSW)
• Support Legs (RT-ST2)
Compatible With:
• T-Glide Fence System – Industrial Series II (TGI2) 36” Rails
36” CBFR105 3600 Rails
NOT COMPATIBLE
(Unless user modies rails)
36” TGI2 Rails
COMPATIBLE
FRONT RAIL
FRONT RAIL
REAR RAIL REAR RAIL
Refer to page 22 for more information on rail requirements.
3RT-TGI OWNER’S MANUAL
In-Line Right: Between 52” Rails Option 3 of 3
This conguration maximizes the utility of the existing 52" rip capacity footprint.
Refer to page 22 for more information on rail requirements.
Required Components:
• 30” x 16” Cast Iron Router Table (RT-C30)
• Power Switch (RT-PSW)
• Support Legs (RT-ST2) (Also included with 36” Extension Table)
Compatible With:
• T-Glide Fence System – Industrial Series II (TGI2) 52” Rails
• 36” Extension Table (CBFT105 3600) (NOT 52" Extension Table)
52” CBFR104 5200 Rails
NOT COMPATIBLE
(Unless user modies rails)
52” TGI2 Rails
COMPATIBLE
FRONT RAIL
FRONT RAIL
REAR RAIL REAR RAIL
4
RT-TGI OWNER’S MANUAL
DISCONNECT YOUR TABLE SAW FROM ELECTRICAL POWER BEFORE
BEGINNING ANY MODIFICATIONS.
BEFORE YOU BEGIN
Before mounting the Cast Iron Router Table, you may need to replace or modify your rails
or other saw components. See Page 2 for compatibility notes.
Some of the steps involve removing/installing your rails and/or extension wings.
For those steps, please refer to your table saw manual and table saw fence manual.
(Download copies of your manuals at www.sawstop.com.)
For Unassembled Saws:
If your saw has not yet been assembled, begin by installing and aligning the right and left
extension wings as described in the installation documentation for your table saw. Then,
install the RT-compatible front and rear rails as described in your table saw fence manual,
but do not install the tube or tighten the hardware.
5RT-TGI OWNER’S MANUAL
PRODUCT SPECIFICATIONS
30” x 16” Cast Iron Router Table
Cast Iron Table 30” x 16”
Maximum Fence Travel 5 ½”
Front T-slot to Arbor Center 6 ½”
Width of Front T-slot ½” at top,
3⁄8" at bottom
Width of Rear T-slot 1” at top,
¾" at bottom
Rear T-slot to Arbor Center 5”
32” Fence Assembly for Router Tables
Length 56 ½”
Height 3 ½”
Depth 4”
Inhaltsverzeichnis
Beliebte Werkzeugaufbewahrung Handbücher anderer Marken
Ryobi
Ryobi RWB03 Bedienungsanleitung
Husky
Husky H27CH5TR4BGK Bedienungsanleitung
Scheppach
Scheppach ts 2100 Bedienungsanleitung
Cornwell Tools
Cornwell Tools CTB360AKBK Bedienungsanleitung
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung
Cassese
Cassese CS200 CART Bedienungsanleitung
