SC&T DE01 Series Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere SC&T Extender Handbücher

Beliebte Extender Handbücher anderer Marken

SY

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

ASUSTOR

ASUSTOR AS5004U Bedienungsanleitung

1 input 2 output DVI & Audio CAT5 Extender

ITEM NO.: DE01

Our Smart DE01 DVI CAT5 Extender with audio function is using two CAT5E/6 cables to extend your DVI

display up to 50 meters from your HDTV DVI or HDMI source. DVI transmitter with 2 output, one is

DVI loop output and the other is RJ45 CAT5 cable output for remote display. Under non-HDCP operation

mode, the application could be 1 input to 2 output distribution. Both of output built in signal boost

function, the working resolution up to 1920 x 1200.

DE01 1 input 2 output DVI & Audio CAT5 Extender

Extends any DVI compliant device over two CAT5E/6 cables. One CAT5E cable to send

DVI video signal, the other one send DDC and audio signal.

Extend the transmission distance up to 50 meters at 1920 x 1200.

Extend the transmission distance up to 70 meters at 1024 x 768.

Support analog stereo audio: 20Hz –20KHz.

Dual output: 1 x DVI loop output for local, plus 1 x CAT5 RJ45 output for remote side.

Built in equalization and signal boost function.

High quality digital video over CAT5e without any signal loss.

Support DDC, EDID and hot plug detection.

Installation View:

EDID Instruction:

1. Make sure to connect all equipments before sending power; then power on, the DE01T will

copy EDID from the local output monitor for source. It will take around 10 seconds to

complete.

2. If local output does not connect any monitor, it will auto copy EDID from remote monitor.

3. If the monitor not connected, it will use the default EDID.

Panel View:

DE01T

2

DE01R

Cable:

Video Link cable using high quality CAT5E UTP or CAT6 UTP cable,

Data Link cable using CAT5E UTP/STP or CAT6 UTP cable,

It is not high speed signal transmission, so using regular CAT5E UTP cable will be ok.

RJ45 pin Define:

Video Link (TIA/EIA-568-B)

Data Link (TIA/EIA-568-B)

Caution:

The cabling must away from any equipment with electromagnetic wave, i.e.:

microwave, radio equipment, high voltage.

Installation view:

ITEM NO.

DE01T

DE01R

Video Amplifier Bandwidth

2.25 Gpbs

Resolution

Up to 1920 x 1200

Link Cable Distance

CAT.5e 50M@1920 x 1080，60Hz

DVI Cable Distance

28 AWG DVI Cables 6M @1920 x 1080，60Hz

DVI Connector

DVI-I x 2 (29 Pin) Digital Only

DVI-I x 1 (29 Pin) Digital Only

Stereo Audio Connector

3.5mm Phone Jack x 2

3.5mm Phone Jack x 1

Link Connector

RJ45 x 2

RJ45 x 2

Power Supply

5V DC 2Amp Regulated (External)

Power Consumption

1200mA (Max)

350mA (Max)

Temperature

Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%

Dimensions mm

125 x 110 x 30

88 x 95 x30

Weight g

310

200

Rev.B