SC&T HE05BT Bedienungsanleitung

HDMI over IP with RS232, IR, Analog Audio

ITEM NO: HE05BT, HE05BR HDMI over IP with RS232, IR, Analog Audio

The HE05B HDMI with Analog audio, RS232, and IR CAT5 extender design for extends and distribute all

signals over one CAT5 up to 150 meters, with local HDMI monitor output. It provides superior video quality

up to 1920 x 1200 resolutions, and using cost effective Cat5e cable, instead of HDMI, RS232 cables, for an

easy, neater and reliable installation. The local and remote units can be connected together for a

Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.

It is optimized for applications at broadcasting system, multimedia display and multi-data sharing, digital

signage, home network integration, and industrial control, hospital, education, security, Matrix network

system and system control over RS232 and equipment control over IR.

Features:

Extend HDMI, RS232, IR signals over one CAT5E/CAT6 cable.

Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) 32bpp@ 60 Hz

Transmission range up to 150M over CAT5e, 180M over CAT6.

Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated

control system hardware) to control devices attached to the matrix using RS232. Full Duplex data

communication.

HDMI 1.3b and HDCP compliant.

HDMI audio support up to LPCM 7.1@192Khz

Built in Bi-Directional analog audio.

Built in Bi-Directional IR.

Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.

Support PC software and Android/iOS APP control.

HE05BR receiver input source select could be from IR remote control or front panel button.

HE05BT transmitter unit built in HDMI loop output.

HE05BR receiver built in IR programmable module, allow using IR remote control to do

IR/RS232 command.

Support point to point and multiple source devices to multi-display connections via Gigabit network

switch.

Work with HE05BER, HKM01B (HDMI), DKM01B (DVI), VKM03B (VGA) serials products.

Perfect for control remote machines and security monitoring systems, digital signage application.

Optional model: SR01 signal repeater for longer distance application.

Installation View:

Multiple Transmitters to Multiple Receivers Connection: (Matrix Switcher)

Point to Point Direct Connection: (Extender)

One Transmitter to Multiple Receivers Connection: (Splitter)

Multiple Transmitters to One Receiver Connection: (Switcher)

Optional Model: SR01 Signal Repeater (order separately)

Extend data signal for an additional 120meters.

Application for HE05B signals for extra long range transmission.

Ability to cascade connection with multiple SR01 for long range transmission

Built in LED status indication.

External power required.

Plug and play for easy installation.

Work with HE05B CAT5 Extender:

Panel View:

Transmitter

Receiver

LED Indication Status:

Power (Green LED): Flash Booting

ON Boot completed

Link (Blue LED): Flash Connecting or connected but no HDMI input

ON Transmitter connected with Receiver

RJ45 LED: Green Flash Data transmission

Orange On Ethernet connected

Receiver IR (Red LED): On Received IR signal

Flash Enter IR learning mode

Back Panel Rotary Switch Function:

HE05BT and HE05BR must setting at same channel in order to do mutual transmission.

Rotary switch to be follow 16 HEX, could switch “ 0 ~ F “ total 16 channels, A = channel 10, B = channel 11,

others channel same as 16 hex conversion.

HE05BT channel setting must be unique to avoid conflict with any other transmitters.

Front Panel Button Function:

ITEM

HE05BT

Button

LINK

FUNCTION

Short Press

Remote output (on / off)

Video Mode / Graphic Mode*

Long Press (3 seconds)

Loop output (on / off)*

Anti-Dither (1/2/off)*

Press to power on

(Press and hold until Green

LED Flash)

N/A

Update EDID from loop output

Press to power on

(Press and hold until Green

and Blue LED Flash)

RESET to Default*

N/A

ITEM

HE05BR

Button

CH. -

CH. +

Press together

Confirm / Enter menu

Short Press

Previous channel or menu item

Next channel or menu item

Above “bold font” part as the default

RJ45 pin define:

Link Cable (TIA/EIA-568-B)

1. Orange-white Data 1 +

2. Orange Data 1 -

3. Green-white Data 2 +

4. Blue Data 3 +

5. Blue-white Data 3 -

6. Green Data 2 -

7. Brown-white Data 4 +

8. Brown Data 4 -

Cable & Transmission Distance:

Link Cable use high quality Cat.5e UTP/STP/FTP or Cat.6 UTP cable

Transmission distance will be affected by equipment (Switch HUB), cable quality…etc. When

using CAT.5e the max. Transmission distance up to 150M, using CAT.6 cable up to 180M.

You can also use model no: SR01 repeater for extended longer distance or using Gigabit Switch

hub which support IGMP protocol and Jumbo Frame 8K for signal distribution or extend distance.

System Default Settings:

HE05B support Unicast and Multicast two mode, default is Multicast.

In Multicast mode it could be one to one, one to multi, multi to on or multi to multi applications.

The analog audio output of transmitter and input of receiver will be off in this mode, analog audio

only from transmitters send to receivers.

Analog audio bi-direction transmission only in Unicast mode, please refer to the web setting

chapter: Casting Mode

System default IP setting is Auto IP, it will assign 169.254.X.X (submask 255.255.0.0) to

transmitters and receivers, you could also set to DHCP or Static IP, please refer to web setting

chapter: IP Setup.

Bandwidth Chart:

The bandwidth will be varied based on different resolution. Higher resolution may not request

bigger bandwidth. Below Chart is the resolution and bandwidth status for reference.

Resolution (@60Hz)

Average Bandwidth (Mbps)

1080p

77 (24 ~ 91)

720p

46 (29 ~ 150)

480p

63 (36 ~ 73)

1600x1200 (UXGA)

59 (24 ~ 73)

1280x1024 (SXGA)

58 (31 ~ 76)

1024x768 (XGA)

118 (56 ~ 138)

800x600 (SVGA)

83 (64 ~ 107)

Under Gigabit Ethernet network, the total flow must not exceed 1000Mbps to avoid any delay on

video streaming. If the video play with 1080p resolution, the HE05BT Transmitter allow maximum

up to 10pcs for simultaneous video streaming.

Remote Control Function:

If you do not use PC computer management to setup HE05BR, then you could use

the IR infrared remote control to preset channel selection. Using the IR remote

control to the front of HE05BR will be ok.

Initial at first time use the remote control or after change battery of remote control,

the IR remote control and the equipment IR ID must be using same ID. The default

IR ID is 8.

To setting the IR ID, Press and hold power button, then press button 8 to complete

the setting. + .(for example)

Remote Control Button Function:

Symbol Function

Power Temporarily turn off the screen output /setup remote control IR ID

MENU Quick menu selection, input numbers after press menu button

LEFT previous channel

RIGHT next channel

UP previous quick Menu selection

DOWN next quick Menu selection

ENTER Confirmation / display the current channel

1 number 1

2 number 2

3 number 3

4 numuber4

5 number 5

6 number 6

7 number 7

8 number 8

9 number 9

0 number 0

* cancel / exit

# clear input number

A no function

B no function

Remote Control Operation:

Select Channel：

Mode 1: use or select channel, if no any action after 3 seconds then it is the select

channel or press immediately to confirm the input channel.

Mode 2: select the channel number and press to confirm the input channel.

Select Function：

Mode 1: use or select function, press to confirm.

Mode 2: press , then input function number as below , press to confirm.

Basic Menu Number:

0 MAC Address Display equipment MAC Address.

1 IP Address Display equipment IPAddress

2 Host IP Address Display current connected Host IPAddress

3 Enable advance menu Enable advance menu

4 Disable advance menu Disable advance menu

Advance Menu Number:

8 IR ID Display current IR ID setting

9 IR Control Version Display IR control software version

10 Restart Link Reconnect with Host

11 Stop Link Stop the connection with Host

20 Graphic or Video Mode Switch Host Video or Graphic(default) Mode

21 Anti-Dithering Switch Host Video Anti-Dithering define, default is off

30 Enable Channel Button Enable Channel Button

31 Disable Channel Button Disable Channel Button

32 Enable IR Remote Enable IR Remote

33 Disable IR Remote Disable IR Remote

34 Enable IR Extender Enable IR Extender

35 Disable IR Extender Disable IR Extender

50 Set IR ID to 0 Set IR ID to 0

51 Set IR ID to 1 Set IR ID to 1

52 Set IR ID to 2 Set IR ID to 2

53 Set IR ID to 3 Set IR ID to 3

54 Set IR ID to 4 Set IR ID to 4

55 Set IR ID to 5 Set IR ID to 5

56 Set IR ID to 6 Set IR ID to 6

57 Set IR ID to 7 Set IR ID to 7

58 Set IR ID to 8 Set IR ID to 8

59 Set IR ID to 9 Set IR ID to 9

300 Force Update EDID of a Target Client Set host EDID from current monitor

333 Reset to Factory Default Reset to Factory Default

999 Reboot Restart the system

IR Module Advance Menu Number: (display when IR module be installed)

200 Delete All IR Key Delete all learned IR key

100~147:

No.

Function

No.

Function

No.

Function

No.

Function

100

Learn IR KEY 0

112

Learn IR KEY 4

124

Learn IR KEY 8

136

Learn IR KEY 12

101

Send IR KEY 0

113

Send IR KEY 4

125

Send IR KEY 8

137

Send IR KEY 12

102

Delete IR KEY 0

114

Delete IR KEY 4

126

Delete IR KEY 8

138

Delete IR KEY 12

103

Learn IR KEY 1

115

Learn IR KEY 5

127

Learn IR KEY 9

139

Learn IR KEY 13

104

Send IR KEY 1

116

Send IR KEY 5

128

Send IR KEY 9

140

Send IR KEY 13

105

Delete IR KEY 1

117

Delete IR KEY 5

129

Delete IR KEY 9

141

Delete IR KEY 13

106

Learn IR KEY 2

118

Learn IR KEY 6

130

Learn IR KEY 10

142

Learn IR KEY 14

107

Send IR KEY 2

119

Send IR KEY 6

131

Send IR KEY 10

143

Send IR KEY 14

108

Delete IR KEY 2

120

Delete IR KEY 6

132

Delete IR KEY 10

144

Delete IR KEY 14

109

Learn IR KEY 3

121

Learn IR KEY 7

133

Learn IR KEY 11

145

Learn IR KEY 15

110

Send IR KEY 3

122

Send IR KEY 7

134

Send IR KEY 11

146

Send IR KEY 15

111

Delete IR KEY 3

123

Delete IR KEY 7

135

Delete IR KEY 11

147

Delete IR KEY 15

IR Key Learning：

IR KEY function is use IR module which built-in HE05BR receiver to learn IR signal of TV remote

control and saved in the module, then you could use programmable RS232 command from

HE05BT transmitter to control the IR module send and IR signal to TV.

It could control all kinds of TV but do not need RS232 port on it.

How To Learn IR KEY :

First, press the menu: e.g. IR KEY 0 press , the screen OSD will show “Start

Learn”, press the button of the remote control you want to learn and closed to (3cm) IR receiver of

HE05BR receiver in 10 seconds. It will shows “Learn Succeed”or “Learn Error”after learning.

After learning you could double check if it works correctly, e.g. press , it will

send the IR KEY 0 immediately.

3cm

IR Module Command：

Control receivers IR module in same transmitter channel by RS-232, settings: 115200bps (8-N-1)

Parameters and format:

>IRM_MAC ADDRESS> command parameters

Send command to receiver of specific MAC Address

>IRM_CHANNELx> command parameters

Send command to receivers of specific channel

x equals 0~ F or * , A = channel 10, B = channel 11, and so on, * = all channels

Response format:

<IRM_MAC ADDRESS< response character

Response message from receiver of specific MAC Address

If use >IRM_ CHANNELx> command, receivers will not response.

Command List:

Command

Function

Parameters

Response

MODULE

Display installed module

N/A

US / EU = module installed

NI / no response = module not installed

SEND

Send IR KEY

0-15 (IR KEY No.)

OK = IR KEY Send completed

ERROR = module not installed

NOT LEARN = the IR KEY not learned

IR_ID

Set IR ID

0-9 (IR ID No.)

? (display IR ID No.)

OK = IR ID Setting successful

ERROR = Setting fail

BUTTON

Set button

OFF

? (display setting)

OK = Setting successful

ERROR = Setting fail

IR_REMOTE

Set IR remote

OFF

? (display setting)

OK = Setting successful

ERROR = Setting fail

IR_EXTENDER

Set IR Extender

OFF

? (display setting)

OK = Setting successful

ERROR = Setting fail

REBOOT

System reboot

N/A

SYSTEM REBOOT

e.g.:

>IRM_AABBCCDDEEFF> MODULE (ask receiver at MAC Address AABBCCDDEEFF IR module status)

<IRM_AABBCCDDEEFF< EU (response “EU”from receiver at MAC Address AABBCCDDEEFF)

>IRM_AABBCCDDEEFF> SEND 0 (make receiver at MACAddress AABBCCDDEEFF send IR KEY 0)

<IRM_AABBCCDDEEFF< OK (response “OK”from receiver at MAC Address AABBCCDDEEFF)

>IRM_AABBCCDDEEFF> SEND 1 (make receiver at MACAddress AABBCCDDEEFF send IR KEY 1)

<IRM_AABBCCDDEEFF< NO LEARN (response “NO LEARN”from receiver at MAC Address

AABBCCDDEEFF)

>IRM_CHANNEL5> SEND 0 (make receivers at Channel 5 send IR KEY 0)

>IRM_CHANNELA> SEND 1 (make receivers at Channel A (10) send IR KEY 1)

>IRM_CHANNEL*> BUTTON OFF (disable button operation of all receivers)

Andere Handbücher für HE05BT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SC&T Extender Handbücher

SC&T

SC&T IP05I Bedienungsanleitung

SC&T

SC&T HE01SL Bedienungsanleitung

SC&T

SC&T HKM01 Bedienungsanleitung

SC&T

SC&T VE02AL Bedienungsanleitung

SC&T

SC&T HE05CT Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

SC&T

SC&T HE02ER Bedienungsanleitung

SC&T

SC&T VE01HA Bedienungsanleitung

SC&T

SC&T IP09CK Bedienungsanleitung

SC&T

SC&T UE03 Bedienungsanleitung

SC&T

SC&T UE03H Bedienungsanleitung

SC&T

SC&T HE01F-4K Bedienungsanleitung

SC&T

SC&T AE01-T Bedienungsanleitung

SC&T

SC&T HE01ERK Bedienungsanleitung

SC&T

SC&T HE02EIP Bedienungsanleitung

SC&T

SC&T VKM03T Bedienungsanleitung

SC&T

SC&T DKM01 Bedienungsanleitung

SC&T

SC&T IP01 Bedienungsanleitung

SC&T

SC&T HKM01-4K-KS Bedienungsanleitung

SC&T

SC&T HE02EXP Bedienungsanleitung

SC&T

SC&T IP05I Bedienungsanleitung

SC&T

SC&T UE03 Bedienungsanleitung

SC&T

SC&T HUE03T-4K Bedienungsanleitung

SC&T

SC&T VE05AL Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung