4.4 IR RX (Default IR RX: O O O O)
This function setup the IR signal whether from HDBaseT location is sent to MATRIX to control local device
through the IR Tx output jack. Setting O the transmission is enabled, setting X transmission is off.
This is a typical application when the user wants to control from the remote location a source like a DVD
player.
After entering IR RX menu, press ENTER. Then LCM second line of text will flash. Press RIGHT or LEFT button to
select the IR RX input to be modified. Press UP or DOWN button to select O or X. Then press ENTER to
confirm setting.
HDBaseT 1 2 3 4
IR RX O X O X
O : on X : off
4.5 HDBaseT IR ID (Default IR ID: 0 1 2 3)
This function must be set to have different ID in order to avoid HDBaseT remote control IR01 conflicts with
other devices remote control.
After entering HDBaseT IR ID menu, press ENTER. Then LCM second line of text will flash. Press RIGHT or LEFT
button to select the IR ID input to be modified. Press UP or DOWN button to select the ID. Then press ENTER
to confirm setting.
When you finish the HDBaseT IR ID setting, the HDBaseT remote controls IR01 must also be set with the
same ID in order to perform the right operations. (See 5.2)
Remote IR ID setting mode: Press and hold the POWER button, then press the
number button which can be set from 0 to 9, total 10 groups. (See 5.2)
