3
GB
SAFETY INSTRUCTIONS
Working safely with this machine is possible only when the operating and safety information
are read completely and the instructions contained therein are strictly followed. Follow the
standard safety regulations for working with electrical equipment to reduce the risk of acci-
dents. The manual shall be kept in a known location and be easily accessible for operators and
maintenance staff.
1. The machine may only be operated by persons who are authorised and have read and understood
this manual.
2. Before each use, check the unit for full functional capability. If the functional capability is not en-
sured or if damage is tdetected, the unit should not be used. Do not make any construction changes
to the unit.
3. In case of failure, the machine must be stopped before the problem is solved.
4. If the number of operations is above the maximum recommended operations suggested by the
authority, breaks or shifting tasks should be planned throughout the day.
5. There is no danger of being exposed to hazardous materials or substances when working with the
spring compressor.
6. OPERATORS Should be trained in starting and stopping the machine as well as instruction in the
use of emergency stop, addressing issues, security requirements for the machine, including the use
of personal protective equipment, review of visual warnings - meaning and action.
7. MAINTENANCE PERSONEL Should be trained in the machine’s functions, the machines failure
modes and their rectication, and operation and maintenance of the machine.
8. Check the cord frequently to ensure that it has not been in contact with sharp edges or alike.
Protect the cord against oil, heat and sharp edges.
9. Use only suitable jaws for the springs. Ensure that the spring is positioned correctly in the jaw. The
centre line of the spring must be centered in both jaws. The centre line of the spring must always
be parallel to the compressing device, especially for conical springs and ball springs.
10. When compressing the spring, neither the spring windings nor the jaws should come in contact
with each other.
11. The bolts of the jaws must always be rmly tightened.
12. It is very important that the safety cage is always used when activating the compressor.
13. Always wear suitable protective eyewear and working gloves. Do not wear loose clothing that can
get caught in the machine.
14. Safety tip shoes should be worn when using or maintaining the spring compressor.
15. The noise level is measured above 70 dB so ear protection or ear plugs are recommended when
using the machine.
16. Vibrations caused by the spring compressor do not pose any danger for the user.
