Schlage S-480 Bedienungsanleitung

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

Andere Handbücher für S-480

Inhaltsverzeichnis

Andere Schlage Sperren Handbücher

Schlage

Schlage L-SERIES Bedienungsanleitung

Schlage

Schlage BE499WB Bedienungsanleitung

Schlage

Schlage Door Locks Bedienungsanleitung

Schlage

Schlage Everest 29 Bedienungsanleitung

Schlage

Schlage Control Series Bedienungsanleitung

Schlage

Schlage LT Series Service-Handbuch

Schlage

Schlage AD-300 Bedienungsanleitung

Schlage

Schlage BE489WB Bedienungsanleitung

Schlage

Schlage Dexter 605 Bedienungsanleitung

Schlage

Schlage M400 Series Bedienungsanleitung

Schlage

Schlage ND Series Bedienungsanleitung

Schlage

Schlage L9000 Series Bedienungsanleitung

Schlage

Schlage L9000 Series Bedienungsanleitung

Schlage

Schlage D50 Bedienungsanleitung

Schlage

Schlage BE469 Bedienungsanleitung

Schlage

Schlage FE575 Bedienungsanleitung

Schlage

Schlage D-Series Bedienungsanleitung

Schlage

Schlage Touchscreen Deadbolt with Alarm Bedienungsanleitung

Schlage

Schlage AD-200 Bedienungsanleitung

Schlage

Schlage B360 Bedienungsanleitung

Schlage

Schlage F-Series Bedienungsanleitung

Schlage

Schlage FE575 Bedienungsanleitung

Schlage

Schlage BE365 Bedienungsanleitung

Schlage

Schlage FE410F Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung