Revision: 2012-02-15
Important Safety Precautions
To reduce the risk of fire, bodily injury, and damage to the equipment, observe
the following precautions:
Read and follow all warning notices and instructions marked on the product
or included in the manual.
This product is to be used with telecommunications circuits. Take the follow-
ing precautions:
JNever install telephone wiring during a lightning storm.
JNever install telephone jacks in wet locations unless the jack is specifical-
ly designed for wet locations.
JNever touch un-insulated telephone wires or terminals unless the tele-
phone line has been disconnected at the network interface.
JUse caution when installing or modifying telephone lines.
JAvoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
JDo not use the telephone to report a gas leak in the vicinity of the leak.
Condensation may occur externally or internally if this product is moved from
a colder room to a warmer room. When moving this product under such con-
ditions, allow ample time for this product to reach room temperature and to
dry before operating.
This product is intended for use in environments as stated in the technical
specifications. Do not use this product in areas classified as hazardous loca-
tions. Such areas include patient care areas of medical and dental facilities,
oxygen-laden environments, or industrial facilities. Contact your local electri-
cal authority governing building construction, maintenance, or safety for more
information regarding the installation of this product.
Slots and openings in this product are provided for ventilation and should
never be blocked or covered, since these ensure reliable operation of this
product and protect it from overheating. This product should not be placed in
a built-in apparatus such as a rack unless the apparatus has been specifically
designed to accommodate the product, proper ventilation is provided for the
product, and the product instructions have been followed.
This product should be placed away from radiators, heat registers, stoves, or
other pieces of equipment that produce heat. Allow sufficient air circulation
around the product during use to ensure adequate cooling of the device.
Do not use this product in a wet location.
This product should be operated only from the type of power source indicated
on the product's electrical ratings label. Contact your local Schmid Distributor
or local power company if you have questions about the type of power source
to use
