SCHUNK ROTA TB2 470-185 Gebrauchsanweisung

Translation of the original operating manual

Pneumatic front-end chuck

ROTA TB2 / ROTA TB2 LH

Assembly and Operating Manual

Superior Clamping and Gripping

Imprint

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Imprint

This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights

reserved. Any reproduction, processing, distribution (making available to third parties),

translation or other usage - even excerpts - of the manual is especially prohibited and

requires our written approval.

Technical changes:

We reserve the right to make alterations for the purpose of technical improvement.

Document number: 0889132

Version: 04.00 |02/12/2020|en

Dear Customer,

thank you for trusting our products and our family-owned company, the leading

technology supplier of robots and production machines.

Our team is always available to answer any questions on this product and other solutions.

Ask us questions and challenge us. We will find a solution!

Best regards,

Your SCHUNK team

H.-D. SCHUNK GmbH & Co.

Spanntechnik KG

Lothringer Str. 23

D-88512 Mengen

Tel. +49–7572-7614-0

Fax +49-7572-7614-1099

[email protected]

schunk.com

Customer Management

Tel. +49–7572-7614-1300

Fax +49-7572-7614-1039

customercentermenge[email protected]k.com

Please read the operating manual in full and keep it close to the product.

Table of contents

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Table of contents

General .................................................................................................................... 5

1.1

About this manual .................................................................................................... 5

1.1.1

Presentation of Warning Labels.................................................................... 5

1.1.2

Applicable documents................................................................................... 6

1.1.3

Sizes............................................................................................................... 6

1.2

Warranty................................................................................................................... 6

1.3

Scope of delivery ...................................................................................................... 7

Basic safety notes .................................................................................................... 8

2.1

Intended use............................................................................................................. 8

2.2

Not intended use ...................................................................................................... 9

2.3

Constructional changes ............................................................................................ 9

2.4

Spare parts................................................................................................................ 9

2.5

Environmental and operating conditions............................................................... 10

2.6

Notes on safe operation......................................................................................... 10

2.6.1

Substantial modifications............................................................................ 15

2.7

Personnel qualification........................................................................................... 15

2.8

Personal protective equipment.............................................................................. 16

2.9

Transport ................................................................................................................ 16

2.10

Malfunctions........................................................................................................... 17

2.11

Disposal................................................................................................................... 17

2.12

Fundamental dangers............................................................................................. 17

2.12.1

Protection during handling and assembly .................................................. 18

2.12.2

Protection during commissioning and operation ....................................... 18

2.12.3

Protection against dangerous movements................................................. 18

2.12.4

Notes on particular risks ............................................................................. 19

2.13

2-jaw chuck............................................................................................................. 22

Technical data ......................................................................................................... 23

3.1

Chuck data .............................................................................................................. 23

3.2

Clamping force / speed diagrams........................................................................... 25

3.3

Calculations for clamping force and speed ............................................................ 30

3.3.1

Calculation of the required clamping force in case of a given rpm............ 30

3.3.2

Calculation example: required initial clamping force for a given speed .... 32

3.3.3

Calculation of the permissible speed in case of a given initial clamping

force ............................................................................................................ 34

3.4

Grades of Accuracy................................................................................................. 35

3.5

Permissible imbalance............................................................................................ 35

Table of contents

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Torques per screw ................................................................................................... 35

Assembly................................................................................................................. 36

5.1

Pre-assembly measures.......................................................................................... 36

5.2

Distributor ring ....................................................................................................... 37

5.2.1

Mounting with bracket ............................................................................... 38

5.2.2

Mounting with 2-part clamping ring (D.R.M.B.) ......................................... 40

5.3

Attachment of the ROTA TB2 chuck....................................................................... 42

5.4

Optional mechanical pressure monitor with inductive proximity switch ............. 43

5.5

Mechanical stroke monitoring with inductive proximity switches on dual stroke

chucks ..................................................................................................................... 44

Function .................................................................................................................. 46

6.1

Principle of Operation ............................................................................................ 46

6.2

Air transmission system ......................................................................................... 47

6.3

Pilot controlled check valve.................................................................................... 48

6.4

Faults, causes and solutions ................................................................................... 49

Commissioning and maintenance ............................................................................ 51

7.1

Commissioning ....................................................................................................... 51

7.2

Maintenance........................................................................................................... 52

7.2.1

Maintenance intervals ................................................................................ 55

7.2.2

Hardened Reversible Jaws and Soft Top Jaws ............................................ 56

Disassembly and assembly ...................................................................................... 57

8.1

Disassembly and cleaning....................................................................................... 57

8.2

Assembly................................................................................................................. 59

8.2.1

Mounting of optional mechanical pressure monitoring system ................ 61

Control of types TB2, TB2 LH.................................................................................... 62

TB2S, TB2S LH stationary power chucks ................................................................... 62

Power Chuck with extended and standard jaw stroke (LH) ...................................... 63

Spare parts.............................................................................................................. 64

Assembly drawings.................................................................................................. 67

Translation of the original declaration of incorporation ........................................... 69

General

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

General

About this manual

This manual contains important information for a safe and

appropriate use of the product.

This manual is an integral part of the product and must be kept

accessible for the personnel at all times.

Before starting work, the personnel must have read and

understood this operating manual. Prerequisite for safe working is

the observance of all safety instructions in this manual.

Illustrations in this manual are provided for basic understanding

and may differ from the actual product design.

In addition to these instructions, the documents listed under

(1.1.2, Page 6) are applicable.

Presentation of Warning Labels

To make risks clear, the following signal words and symbols are

used for safety notes.

DANGER

Danger for persons!

Non-observance will inevitably cause irreversible injury or death.

WARNING

Dangers for persons!

Non-observance can lead to irreversible injury and even death.

CAUTION

Dangers for persons!

Non-observance can cause minor injuries.

1.1

1.1.1

General

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

CAUTION

Material damage!

Information about avoiding material damage.

Applicable documents

•General terms of business*

•Catalog data sheet of the purchased product *

•Calculation of the jaw centrifugal forces, "Technology" chapter

in the lathe chuck catalog *

The documents marked with an asterisk (*) can be downloaded on

our homepage schunk.com

Sizes

This operating manual applies to the following sizes:

•ROTA TB2 470-185 / 470-185 LH

•ROTA TB2 520-191 LH

•ROTA TB2 600-275 / 600-275 LH

•ROTA TB2 630-175 LH

•ROTA TB2 685-325 / 685-325 LH

•ROTA TB2 850-375 / 850-375 LH

•ROTA TB2 1000-560 / 1000-560 LH

Warranty

The warranty period is 24 months after delivery date from factory

or 500 000 cycles*, if it is used as intended, under the following

conditions:

•Observe the applicable documents, (1.1.2, Page 6)

•Observe the ambient conditions and operating conditions.

•Observe the specified maintenance and lubrication intervals,

(7, Page 51)

Parts touching the workpiece and wear parts are not included in

the warranty.

* A cycle consists of a complete clamping process ("Open" and

"Close").

1.1.2

1.1.3

1.2

General

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Scope of delivery

Lathe chuck ROTA TB2 (LH)

T-nuts

Elbow connectors

Straight connectors

9 or 12

Fastening screws

Eye bolt

Operating manual

1.3

Basic safety notes

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Basic safety notes

Improper handling, assembly and maintenance of this product may

result in risk to persons and equipment if this operating manual is

not observed. Report any failures and damage immediately and

repair without delay to keep the extent of the damage to a

minimum and prevent compromising the safety of the product.

Only original SCHUNK spare parts may be used.

CONFIRMATION

We hereby confirm that the components comply with the

relevant basic and proven safety principles of Annex A and C of

ISO 13849-2, taking into account the requirements of the

documentation. The parameters, limitations, ambient conditions,

characteristic values, etc. for proper operation are defined in the

operating manual.

Intended use

This product is intended for clamping workpieces on machine tools

and other suitable technical devices.

•The product may only be used within the scope of its technical

data, (3, Page 23).

•The product is intended for industrial and industry-oriented

use.

•Appropriate use of the product includes compliance with all

instructions in this manual.

•The maximum RPM of the chuck and the required clamping

force must be determined by the user for the respective

clamping task based on the applicable standards and technical

specifications of the manufacturer.

(See also “Calculations for clamping force and RPM” in the

chapter “Technical data”). (3, Page 23)

2.1

Basic safety notes

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Not intended use

A not intended use of the product is for example:

•It is used as a press, a punch, a toolholder, a load-handling

device or as lifting equipment.

•the product is used for unintended machines or workpieces.

•the technical data is exceeded when using the product.

(3, Page 23)

•if workpieces are not clamped properly, paying particular

attention to the clamping forces specified by the manufacturer.

•if it is used in working environments that are not permissible.

•if the product is operated without a protective cover.

Constructional changes

Implementation of structural changes

By conversions, changes, and reworking, e.g. additional threads,

holes, or safety devices can impair the functioning or safety of the

product or damage it.

•Structural changes should only be made with the written

approval of SCHUNK.

Spare parts

Use of unauthorized spare parts

Using unauthorized spare parts can endanger personnel and

damage the product or cause it to malfunction.

•Use only original spare parts or spares authorized by SCHUNK.

2.2

2.3

2.4

Basic safety notes

04.00|0889132_ROTA TB2 / ROTA TB2 LH |en

Environmental and operating conditions

Required ambient conditions and operating conditions

Incorrect ambient and operating conditions can make the product

unsafe, leading to the risk of serious injuries, considerable material

damage and/or a significant reduction to the product's life span.

•Make sure that the product is used only in the context of its

defined application parameters, (3, Page 23).

•Make sure that the product is a sufficient size for the

application.

•Only use high-quality cooling emulsions with anti-corrosive

additives during processing.

Clamping force measurement

Depending on the operating conditions, the function and clamping

force must be checked after a certain period of operation

(7.2.1, Page 55).

With the smallest possible actuating pressure (hydraulic cylinder),

the base jaws should move evenly. This method only provides a

limited indication and is not a substitute for measuring the

clamping force.

If the clamping force has dropped too much or if the base jaws and

piston no longer move properly, the chuck must be disassembled,

cleaned, and relubricated (7, Page 51).

Notes on safe operation

•The machine spindle may only be started up when clamping

pressure has built up in the cylinder and clamping has followed

in the permitted work area.

•Unclamping may only be possible when the machine spindle

has come to a standstill.

•If the clamping energy fails, the workpiece must remain firmly

clamped until the spindle is shut down and the workpiece is

secured.

•The technical safety requirements in the respective operating

instructions must be observed exactly.

2.5

2.6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SCHUNK Industrieanlagen Handbücher

SCHUNK

SCHUNK SWS Series Gebrauchsanweisung

SCHUNK

SCHUNK KHM 40 Gebrauchsanweisung

SCHUNK

SCHUNK PGN-plus-P Gebrauchsanweisung

SCHUNK

SCHUNK TENDO HSK-F 63 Gebrauchsanweisung

SCHUNK

SCHUNK KGG 280 Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSR 138 Bedienungsanleitung

SCHUNK

SCHUNK SFL Series Gebrauchsanweisung

SCHUNK

SCHUNK LDL Montage- und Bedienungsanleitung

SCHUNK

SCHUNK PPU-E Gebrauchsanweisung

SCHUNK

SCHUNK PGL-plus-P 10 Gebrauchsanweisung

SCHUNK

SCHUNK GSW-B-AGE Gebrauchsanweisung

SCHUNK

SCHUNK GSW-M Series Gebrauchsanweisung

SCHUNK

SCHUNK DPG-plus Series Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSE-A3 Series Gebrauchsanweisung

SCHUNK

SCHUNK TENDO Zero Gebrauchsanweisung

SCHUNK

SCHUNK ROTA-M flex 2+2 Series Gebrauchsanweisung

SCHUNK

SCHUNK UFG 66 Gebrauchsanweisung

SCHUNK

SCHUNK PGN-plus-E Gebrauchsanweisung

SCHUNK

SCHUNK JGP-P Gebrauchsanweisung

SCHUNK

SCHUNK TANDEM KSP3 Gebrauchsanweisung

SCHUNK

SCHUNK PPU-E Gebrauchsanweisung

SCHUNK

SCHUNK PZN Gebrauchsanweisung

SCHUNK

SCHUNK TCU-Z Gebrauchsanweisung

SCHUNK

SCHUNK ROTA NCR 165 Gebrauchsanweisung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung

BAC

BAC BCP2D Bedienungsanleitung