SCHUNK SWG 10 Gebrauchsanweisung

Translation of the original manual

2-Finger Angular Gripper

SWG 10 - 50

Assembly and Operating Manual

Superior Clamping and Gripping

Imprint

2 02.00|SWG 10 - 50|en

Imprint

This manual remains the copyrighted property of SCHUNK GmbH & Co. KG. It is solely sup-

plied to our customers and operators of our products and forms part of the product. This

documentation may not be duplicated or made accessible to third parties, in particular com-

petitive companies,

without our prior permission.

Technical changes:

We reserve the right to make alterations for the purpose of technical improvement.

Document number: 0389453

Edition: 02.00 |15/09/2016|en

Dear customer,

congratulations on choosing a SCHUNK product. By choosing SCHUNK, you have opted for

the highest precision, top quality and best service.

You are going to increase the process reliability of your production and achieve best

machining results – to the customer's complete satisfaction.

SCHUNK products are inspiring.

Our detailed assembly and operation manual will support you.

Do you have further questions? You may contact us at any time – even after purchase.

Kindest Regards

Yours SCHUNK GmbH & Co. KG

Spann- und Greiftechnik

Bahnhofstr. 106 – 134

D-74348 Lauffen/Neckar

Tel. +49-7133-103-0

Fax +49-7133-103-2399

[email protected]k.com

www.schunk.com

Table of contents

02.00|SWG 10 -

50|en

Table of contents

General .............................................................................................................................. 5

1.1

About this manual ............................................................................................................. 5

1.1.1

Presentation of Warning Labels ........................................................................... 5

1.1.2

Applicable documents........................................................................................... 6

1.1.3

Sizes ........................................................................................................................ 6

1.1.4

Variants .................................................................................................................. 6

1.2

Warranty ............................................................................................................................ 6

1.3

Scope of delivery................................................................................................................ 7

1.3.1

Accessories kit........................................................................................................ 7

1.4

Accessories ......................................................................................................................... 7

1.4.1

Sensors ................................................................................................................... 7

Basic safety notes ............................................................................................................. 8

2.1

Intended use ...................................................................................................................... 8

2.2

Not intended use ............................................................................................................... 8

2.3

Constructional changes ..................................................................................................... 8

2.4

Spare parts ......................................................................................................................... 8

2.5

Gripper fingers .................................................................................................................. 9

2.6

Environmental and operating conditions ........................................................................ 9

2.7

Personnel qualification...................................................................................................... 9

2.8

Personal protective equipment ...................................................................................... 10

2.9

Notes on safe operation.................................................................................................. 11

2.10

Transport .......................................................................................................................... 11

2.11

Malfunctions .................................................................................................................... 11

2.12

Disposal ............................................................................................................................ 12

2.13

Fundamental dangers...................................................................................................... 12

2.13.1

Protection during handling and assembly......................................................... 12

2.13.2

Protection during commissioning and operation ............................................. 13

2.13.3

Protection against dangerous movements ....................................................... 13

2.13.4

Protection against electric shock ....................................................................... 14

2.14

Notes on particular risks ................................................................................................. 14

Technical Data ................................................................................................................ 16

Design and description .................................................................................................... 17

4.1

Configuration ................................................................................................................... 17

4.2

Description ....................................................................................................................... 17

Assembly ......................................................................................................................... 18

5.1

Assembly and connection ............................................................................................... 18

Table of contents

4 02.00|SWG 10 - 50|en

5.2

Mechanical connection ................................................................................................... 19

5.3

Air connection ................................................................................................................. 20

5.4

Mounting the sensor ....................................................................................................... 21

5.4.1

Programmable magnetic switch (MMS-P) ........................................................ 21

5.4.2

Optical proximity switch ONS for SWG 10 and 12 ............................................ 24

Troubleshooting .............................................................................................................. 26

6.1

Gripper does not move ................................................................................................... 26

6.2

The module does not travel through the entire stroke? .............................................. 26

6.3

The gripping force is dropping ........................................................................................ 27

6.4

The magnetic switch does not function?....................................................................... 27

Maintenance.................................................................................................................... 27

Translation of original declaration of incorporation........................................................ 28

General

02.00|SWG 10 -

50|en

General

About this manual

This manual contains important information for a safe and appropri-

ate use of the product.

This manual is an integral part of the product and must be kept ac-

cessible for the personnel at all times.

Before starting work, the personnel must have read and understood

this operating manual. Prerequisite for safe working is the ob-

servance of all safety instructions in this manual.

Illustrations in this manual are provided for basic understanding and

may differ from the actual product design.

In addition to these instructions, the documents listed under

(1.1.2, Page 6) are applicable.

Presentation of Warning Labels

To make risks clear, the following signal words and symbols are used

for safety notes.

DANGER

Danger for persons!

Non-observance will inevitably cause irreversible injury or death.

WARNING

Dangers for persons!

Non-observance can lead to irreversible injury and even death.

CAUTION

Dangers for persons!

Non-observance can cause minor injuries.

NOTICE

Material damage!

Information about avoiding material damage.

1.1

1.1.1

General

6 02.00|SWG 10 - 50|en

Applicable documents

• General terms of business *

• Catalog data sheet of the purchased product *

• Assembly and Operating manuals of the accessories *

The documents marked with an asterisk (*) can be downloaded on

our homepage www.schunk.com.

Sizes

This operating manual applies to the following sizes:

• SWG 10

• SWG 12

• SWG 16

• SWG 20

• SWG 25

• SWG 32

• SWG 40

• SWG 50

Variants

This operating manual applies to the following variations:

• SWG

• SWG - High-temperature (V/HT)

Warranty

If the product is used as intended, the warranty is valid for 24 months

from the ex-works delivery date under the following conditions:

• Intended use in 1-shift operation

• Observe the ambient conditions and operating conditions

Parts touching the workpiece and wearing parts are not included in

the warranty.

1.1.2

1.1.3

1.1.4

1.2

General

02.00|SWG 10 -

50|en

Scope of delivery

The scope of delivery includes

• 2-Finger Angular Gripper SWG in the version ordered

• Accessory pack

Accessories kit

ID.-No. of the accessory pack

Accessory pack for

ID number

SWG 10

5516073

SWG 12

5515655

SWG 16

5513115

SWG 20

5513116

SWG 25

5513117

SWG 32

5513118

SWG 40

5513119

SWG 50

5513120

Accessories

A wide range of accessories are available for this product

For information about which accessories can be used with the ap-

propriate product version see catalog.

Sensors

Overview of the compatible sensors

Designation

Type

Programmable magnetic switch

MMS-P

Optical switch

ONS

• Exact type designation of the compatible sensors see catalog.

• Information about the operation of sensors at

www.de.schunk.com or at the SCHUNK contact persons.

1.3

1.3.1

1.4

1.4.1

Basic safety notes

8 02.00|SWG 10 - 50|en

Basic safety notes

Intended use

The product is designed exclusively for gripping and temporarily hold-

ing workpieces or objects.

• The product may only be used within the scope of its technical da-

ta, (3, Page 16).

• The product is intended for installation in a machine/system. The

applicable guidelines must be observed and complied with.

• The product is intended for industrial use.

• Appropriate use of the product includes compliance with all in-

structions in this manual.

Not intended use

It is not intended use if the product is used, for example, as a pressing

tool, stamping tool, lifting gear, guide for tools, cutting tool, clamping

device or a drilling tool.

• Any utilization that exceeds or differs from the appropriate use is

regarded as misuse.

Constructional changes

Making constructional changes

Modifications, constructional changes and subsequent work, e.g. ad-

ditional threads, drill holes and safety devices may impair the opera-

tion and safety or damage the product.

• Constructional changes may only be done with SCHUNK's permission.

Spare parts

Use of unauthorised spare parts

Using unauthorised spare parts can endanger personnel and damage

the product or cause it to malfunction.

• Use only original spare parts or spares authorised by Schunk.

2.1

2.2

2.3

2.4

Basic safety notes

02.00|SWG 10 - 50|

Gripper fingers

Requirements for the gripper fingers

Stored energy within the product creates the risk of serious injuries

and significant property damage.

• Arrange the gripper fingers in a way that the product reaches ei-

ther the position "open" or "closed" in a de-energized state.

• Only exchange the gripper fingers when no residual energy re-

mains in the product.

Environmental and operating conditions

Required ambient conditions and operating conditions

Incorrect ambient and operating conditions can make the product

unsafe, leading to the risk of serious injuries, considerable material

damage and/or a significant reduction to the product's life span.

• Make sure that the product and the top jaws are a sufficient size

for the application.

• Make sure that the environment is free from splash water and

vapors as well as from abrasion or processing dust. Exceptions are

products that are designed especially for contaminated environ-

ments.

Personnel qualification

Inadequate qualifications of the personnel

If the personnel working with the product is not sufficiently qualified,

the result may be serious injuries and significant property damage.

• All work may only be performed by qualified personnel.

• Before working with the product, the personnel must have read

and understood the complete assembly and operating manual.

• Observe the national safety regulations and rules and general

safety instructions.

2.5

2.6

2.7

Basic safety notes

10 02.00|SWG 10 - 50|en

The following personal qualifications are necessary for the various ac-

tivities related to the product:

Due to their technical training, knowledge and experience, trained

electricians are able to work on electrical systems, recognize and

avoid possible dangers and know the relevant standards and regula-

tions.

Pneumatics specialists have been trained for this particular area of

responsibility and know the relevant standards and regulations.

Hydraulic specialists have been trained for this particular area of re-

sponsibility and knows the relevant standards and regulations.

Due to its technical training, knowledge and experience, qualified

personnel is able to perform the delegated tasks, recognize and avoid

possible dangers and knows the relevant standards and regulations.

Instructed persons were instructed by the operator about the dele-

gated tasks and possible dangers due to improper behaviour.

Due to its technical training, knowledge and experience, service per-

sonnel of the manufacturer is able to perform the delegated tasks

and to recognize and avoid possible dangers.

Personal protective equipment

Using personal protective equipment

Not wearing personal protective equipment while working with the

product, may result in dangers that impact the personnel's safety and

health.

• While working with the product, obeserve the health and safety

regulations and wear the required personal safety equipment.

• Observe the valid safety and accident prevention regulations.

• In case of sharp edges and corners and rough surfaces, wear pro-

tection gloves.

• In case of hot surfaces, wear heat-resistant protection gloves.

• When dealing with hazardous substances, wear protection gloves

and goggles.

• In case of moving parts, wear tight protection clothes.

Trained electrician

Pneumatics specialist

Hydraulic specialist

Qualified personnel

Instructed person

Service personnel of

the manufacturer

2.8

Andere Handbücher für SWG 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SCHUNK Industrieanlagen Handbücher

SCHUNK

SCHUNK TANDEM KSP3 Gebrauchsanweisung

SCHUNK

SCHUNK ROTA THW3 Bedienungsanleitung

SCHUNK

SCHUNK PFH 30 Gebrauchsanweisung

SCHUNK

SCHUNK ROTA NCK-S plus Gebrauchsanweisung

SCHUNK

SCHUNK PGN Series Gebrauchsanweisung

SCHUNK

SCHUNK NSR maxi 220 Gebrauchsanweisung

SCHUNK

SCHUNK ROTA THWplus Gebrauchsanweisung

SCHUNK

SCHUNK MWS Series Gebrauchsanweisung

SCHUNK

SCHUNK SMPL Gebrauchsanweisung

SCHUNK

SCHUNK GM Series Gebrauchsanweisung

SCHUNK

SCHUNK GSW-B-AGE Gebrauchsanweisung

SCHUNK

SCHUNK PGN-plus Series Gebrauchsanweisung

SCHUNK

SCHUNK ZENTRICO THL plus Gebrauchsanweisung

SCHUNK

SCHUNK TENDO Turn DKE Gebrauchsanweisung

SCHUNK

SCHUNK CMS 050 Gebrauchsanweisung

SCHUNK

SCHUNK KSC-D 80 Benutzerhandbuch

SCHUNK

SCHUNK MPG-plus Reparaturanleitung

SCHUNK

SCHUNK WBL 85 Balfour Beatty Bedienungs- und Wartungshandbuch

SCHUNK

SCHUNK TANDEM KSH3 Bedienungsanleitung

SCHUNK

SCHUNK SRU 20 Gebrauchsanweisung

SCHUNK

SCHUNK ROTA-S flex 550 Gebrauchsanweisung

SCHUNK

SCHUNK SRU-plus-D Gebrauchsanweisung

SCHUNK

SCHUNK PZB-plus Gebrauchsanweisung

SCHUNK

SCHUNK KSC3 Benutzerhandbuch

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung

BAC

BAC BCP2D Bedienungsanleitung