SCREENWAVE JWR2100 Bedienungsanleitung
JWR2100 User Manual v. 01
Wireless Presentation Systemwith Dual Band AC2100 Router
Contents
Chapter 1: Know your JWR2100 router
Package content .................................................................................................................................................3
Description for the appearance of JWR2100 router ..........................................................................................3
Chapter 2: Build your network
Router location ...................................................................................................................................................4
System requirements of product........................................................................................................................4
Build your JWR2100 router ................................................................................................................................5
Wired connection ...............................................................................................................................................6
Wireless connection ...........................................................................................................................................6
Set up the TCP/IP setting of system....................................................................................................................7
Windows setting.................................................................................................................................................7
Mac setting.........................................................................................................................................................7
Chapter 3: Management setting interface of wireless router
Network setup wizard ........................................................................................................................................8
General setting ...................................................................................................................................................9
Description for the network map .....................................................................................................................10
Visitor network setting .....................................................................................................................................12
Parental control setting ....................................................................................................................................13
USB application.................................................................................................................................................14
Wireless network 2.4G setting .........................................................................................................................17
Wireless network 5G setting ............................................................................................................................22
Internal network setting...................................................................................................................................27
External network setting ..................................................................................................................................28
IPv6 setting .......................................................................................................................................................29
Virtual private network ....................................................................................................................................29
Firewall setting .................................................................................................................................................30
System management/information ...................................................................................................................30
NTP setting .......................................................................................................................................................31
Configuration management..............................................................................................................................31
Upgrade firmware ............................................................................................................................................32
System log.........................................................................................................................................................32
Chapter 4: Introduction of the wireless projection function
Requirement for the wireless projection environment....................................................................................33
Wireless projection setting...............................................................................................................................33
Installation on Windows...................................................................................................................................34
Voice output in Windows .................................................................................................................................34
Installation on Mac...........................................................................................................................................35
Installation on Android.....................................................................................................................................35
Voice output in Android ...................................................................................................................................36
Installation regarding Key Pad for iOS ..............................................................................................................36
Description for the operation and light of Key Pad (App/hardware applicable)..............................................37
Instruction for the light of KeyPad....................................................................................................................37
Chapter 5: Troubleshooting..................................................................................................................................38
Chapter 1: Know your JWR2100 router
Package content:
Please check if all accessories of JWR2100 are included in the box.
□ JWR2100 wireless router □ RJ45 cable
□ Power converter 12V-2A □ Quick installation guide
□ Warranty card
□ A key pad (Go to j5create website to contact us for additional key pads.)
☆Reminder
For any damaged or missing accessory, contact the seller or j5create customer service center soon.Please refer to the
contact information of j5create customer service center at the back of the manual.
--------------------------------------------------------------------------------------
Description for the appearance of JWR2100 router:
⚫Panel indicator of router (Fig. 1 Clockwise direction)
LAN port indicator
WPS button indicator
5GHz indicator
2.4GHz indicator
Power indicator
USB 2.0 port indicator
VIDEO output indicator
WAN port indicator
⚫Description for the ports on the side of router (Fig. 2)
USB 2.0 port
Power outlet (12V DC-IN)
Power button
Port for the WAN network x 1 (blue)
Port for the LAN network x 4 (yellow)
WPS/Reset button: Press it to activate WPS/Press and hold it to return to the default setting.
HDMI port
VGA port
Speaker Audio output port
⚫Rear view of the router (Fig. 3)
Identification sticker
Default account and password of router
Wall mount hole
☆Reminder
Please use the power converter that comes with the product. (The following diagram shows that the positive pole of
converter is inside and the negative one is outside.) The router might be damaged if the power converters with other
specifications are used.
--------------------------------------------------------------------------------------
Chapter 2: Build your network
Router location
To ensure smooth transmission of wireless signal between the wireless router and the network device connected to
the wireless router, check the following before deciding whether to put your router:
⚫Put the router at the center of the building to ensure that all wireless devices are covered
⚫It is suggested that the router must not be placed near metal objects or in the area with direct sunlight
⚫Keep the router at a distance from other WiFi routers, boosters, engines, microwaves, refrigerators and other
high-power devices to prevent the router from having signal interference or not being able to receive signals
⚫Place the router in an area with great ventilation and heat dissipation
System requirements of product:
Your PC must meet the system requirements below before setting up your network:
⚫An Ethernet RJ45 port (LAN Port) 10Base-T/100bASE-TX/1000BaseTX
⚫Support the IEEE 802.11 a/b/g/n/ac wireless function
⚫The system supports TCP/IP services
⚫Web browsers are available, such as Google chrome, Firefox, Safari, Opera, Internet Explorer and Edge
☆Reminder
Please check if any network device is available in your computer.
If using the single-band IEEE 802.11 b/g/n NIC when receiving the wireless signal from JWR2100, you can only receive
the 2.4GHz band.
If using the single-band IEEE 802.11 a/b/g/n/ac NIC when receiving the wireless signal from JWR2100, you can
receive the 2.4GHz or 5GHz band.
The length of RJ-45 Ethernet cable connecting to the network device must not exceed 100 m, otherwise the router
might not be able to receive any signal or the signal would be unstable.
If you want to replace the router, please disconnect the network (pulling off the network cable and shutting down
the router) and reboot the computer.
--------------------------------------------------------------
Build your JWR2100 router:
Please install the four antennas in the package onto the router in clockwise direction.
Wired connection
1. Insert the AC adapter of wireless router into the DC-IN port and plug in the power cord.
2. Use the RJ-45 cable to connect your computer to the LAN port of wireless router.
3. Make sure that LAN port indicator of the wireless router flashes and the wired connection is completed.
Wireless connection
1. Insert the AC adapter of wireless router into the DC-IN port and plug in the power cord.
2. Use the RJ-45 cable that comes with the package to connect your ISP modem to the WAN port of wireless router.
3. Make sure that the ISP modem is on.
4. Use the wireless card on the computer to set up the network.
Set up the TCP/IP setting of system
Windows setting: TCP/IP receives the IP address automatically.
1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections
2. Click Internet Protocol Version 4 (TCP/IPv4) and click “Properties”.
3. To obtain the IPv4 setting automatically, click “Obtain an IP”address automatically.
4. Click “OK”after completing the procedure.
Mac setting: TCP/IP receives the IP address automatically.
1. Click the apple icon on the top-left corner.
2. Click System Preferences > Network > Settings...
3. Click the TCP/IP tab. Select DHCP from the dropdown list ofConfigure IPv4.
4. Click“Apply Now”after completing the procedure.
☆Reminder
Refer to "Help" in your OS for more information on TCP/IP.
--------------------------------------------------------------------------------------
Chapter 3: Management setting interface of wireless router
JWR2100 comes with a smart web page GUI, allowing you to set up router functions via various web
browsers, such as Internet Explorer, Firefox, Chrome and Safari.
Network setup wizard
When using this system for the first time, you will enter the network setup wizard after login.
Follow the steps below to log in the management setting interface:
1. Enter the default IP address in your web browser (e.g. Internet Explorer, Firefox, Google Chrome, Safari):
10.10.10.254.
2. A login window appears. Enter the default account and password. Default account: admin; default
password: password
☆Reminder
Make sure that you've set that the TCP/IP will receive the IP address automatically.
--------------------------------------------------------------------------------------
3. Enter the network setup wizard. Change the default login password of the router for first time login. Click
“Next”after changing the password.
4. Set the time zone of your country and click “Next”.
5. You can adjust the external network setting if necessary. Click “Next”after confirming the setting.
6. You can adjust the internal network setting if necessary. It is suggested to use the default setting. Click
“Next”after confirming the setting.
7. You can adjust the wireless network setting if necessary. It is suggested to change the default SSID and
password of 2.4G/ 5G. Click “OK”after confirming the setting.
General setting
Description for the network map:
The basic setting is completed. Enter the home screen of router setting afterwards. Check the current
status of 2.4G and 5G from the "Network Map", such as SSID, security mode, encryption setting, network
switch and output screen status.
Connection of external network : Check the current type of external network connection,
network address, network mask and gateway setting quickly.
User connection status : Check the name of the user connecting to the router and the network
address of the router.
Inhaltsverzeichnis
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise