4
14.Only use accessories approved and
recommended by the manufacturer.
15.Always check the condition of any cutters
before use. Keep cutting tools sharp and
clean and properly maintained, this will result
in a better and cleaner cut and less likely to
bind. Follow any instructions relating to
lubrication, sharpening or changing any
accessory/cutter.
16.To maintain optimum control and safety
always keep both hands on the power tool
and/or any attachments. Do not overreach,
keep a proper balanced footing at all times to
ensure total control of the power tool. Keep
both hands away from the cutting area.
Always power down the power tool and wait
for any cutter/spindle to stop before moving
the power tool or making any adjustments.
17.If connection to dust extraction and collection
facilities are provided, ensure that these are
correctly connected and properly used.
18.Always ensure any cutter/blade has stopped
moving. Disconnect the power tool and/or
accessory from any power supply/battery
when not in use, making any adjustments,
changing accessories (e.g. cutters/blades
etc.) or servicing. Always ensure the power
tool is stored in the off position.
19.Never force the power tool, use the correct
power tool and accessories that the job
requires.
20.Always use the power tool and any
accessories or attachments/jigs in
accordance with their instructions taking into
account the work to be performed and the
working conditions. No power tool or
attachment/accessory should be modified or
used for anything other than which it was
designed.
21.Always use relevant clamps or other practical
solutions to support the workpiece safely and
securely.
22.Never leave power tool running unattended.
Do not move or leave a power tool until it has
come to a complete stop.
23.Any accessory or attachment being used
should be kept stable and level at all times.
24.Make sure that any adjustment keys or
spanners are removed and the tool can turn/
operate freely before turning on any power
tool.
25.Before connecting any power tool to a power
supply/battery ensure that the switch is in the
“OFF” position.
26.Always use all guards supplied and check
they are in good working order.
27.Before commencing work check that all bolts,
screws, fixings and fastenings on any power
tool, accessory, attachment, cutter or jig are
tight and secure according to the
manufacturers specifications. Routinely check
if using for a prolonged period.
28.Before commencing any work, check your
workpiece is clear of any metal parts. (e.g.
nails, screws, staples etc.)
29.Hand held power tools can produce
significant levels of vibration. Always refer to
the power tools specifications and any
relevant Health and Safety guides before use.
30.Always have your power tool regularly
serviced by an approved service centre.
ROUTER SAFETY
1. Read and understand all the instructions for
your router, attachments and cutters before
use.
2. Always hold the router with both hands using
the handles. Ensure that the power cord is
kept well clear of the cutter and the workpiece
at all times to prevent damage or snagging.
